10849dac68
* Add Fuyu HS * Fix keyboard.json linting * Fix rgbmatrix configuration * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> --------- Co-authored-by: Joel Challis <git@zvecr.com>
27 lines
1.3 KiB
Markdown
27 lines
1.3 KiB
Markdown
# FUYU HOTSWAP
|
|
|
|
|
|
|
|
An F12 TKL Hotswappable H87-Compat Type-C PCB for the Geon F1-8K
|
|
|
|
* Keyboard Maintainer: [Zykrah](https://github.com/zykrah)
|
|
* Hardware Supported: Fuyu HS 7u rev1, Fuyu HS 6.25u rev1
|
|
* Hardware Availability: [Github Repo](https://github.com/zykrah/fuyu), [GEON Store](https://geon.works/products/fuyu-pcb-for-f1-8k), [Cafege](https://cafege.com.au/products/fuyu-8k-pcb)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make zykrah/fuyu_hs:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make zykrah/fuyu_hs:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly short the `RST` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|