30 lines
		
	
	
	
		
			2 KiB
		
	
	
	
		
			Markdown
		
	
	
	
	
	
			
		
		
	
	
			30 lines
		
	
	
	
		
			2 KiB
		
	
	
	
		
			Markdown
		
	
	
	
	
	
| # Lime Keyboard
 | ||
| 
 | ||
| 
 | ||
| 
 | ||
| Lime is a 6×4+6 keys column-staggered split keyboard with encoder and joystick support. Based on [Lily58](https://github.com/kata0510/Lily58), [Corne](https://github.com/foostan/crkbd), [Helix](https://github.com/MakotoKurauchi/helix) and [Sofle](https://github.com/josefadamcik/SofleKeyboard) keyboards. This board features a reversible PCB, OLEDs, Underglow and Bluetooth support. The PCB has holes for floating or screwed mounts but can be also mounted with a gasket.
 | ||
| 
 | ||
| The Lime keyboard was created by [HellTM](https://github.com/HellSingCoder) with the help of the QMK and custom keyboard community.
 | ||
| 
 | ||
| Build guide and a build log not available yet
 | ||
| 
 | ||
| * Keyboard Maintainer: [HellSingCoder](https://www.simonepellegrino.com/) (GitHub: [HellTM](https://github.com/HellSingCoder))
 | ||
| * Hardware Supported: LimeKeyboard PCB, ProMicro  
 | ||
| * Hardware Availability: [PCB & Case Data](https://github.com/HellSingCoder/LimeKeyboard)
 | ||
| 
 | ||
| Make example for this keyboard (after setting up your build environment):
 | ||
| 
 | ||
|     make lime:default
 | ||
| 
 | ||
| Flashing example for this keyboard:
 | ||
| 
 | ||
|     make lime:default:flash
 | ||
| 
 | ||
| Press reset button on he keyboard when asked. You can do that in 3 ways:
 | ||
| * **Physical reset button**: Briefly press the button near the TRRS connector on the PCB - if you haven't installed one, short the pads instead
 | ||
| * **Keycode in layout**: Press the key mapped to `QK_BOOT` (`Lower` + `Raise` + `Esc` on the default layout)
 | ||
| * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 | ||
| 
 | ||
| Disconnect the first half, connect the second one and repeat the process.
 | ||
| 
 | ||
| See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 | 
