79 lines
2.7 KiB
C
79 lines
2.7 KiB
C
/* Copyright 2020 QMK
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 15
|
|
#define MATRIX_COLS 7
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS \
|
|
{ \
|
|
LINE_PIN8, /* ROW_EQL */ \
|
|
LINE_PIN9, /* ROW_1 */ \
|
|
LINE_PIN10, /* ROW_2 */ \
|
|
LINE_PIN11, /* ROW_3 */ \
|
|
LINE_PIN7, /* ROW_4 */ \
|
|
LINE_PIN16, /* ROW_5 */ \
|
|
LINE_PIN5, /* ROW_6 */ \
|
|
LINE_PIN3, /* ROW_7 */ \
|
|
LINE_PIN4, /* ROW_8 */ \
|
|
LINE_PIN1, /* ROW_9 */ \
|
|
LINE_PIN0, /* ROW_0 */ \
|
|
LINE_PIN2, /* ROW_MIN */ \
|
|
LINE_PIN17, /* ROW_ESC */ \
|
|
LINE_PIN23, /* ROW_F1 */ \
|
|
LINE_PIN21 /* ROW_F2 */ \
|
|
}
|
|
|
|
#define MATRIX_COL_PINS \
|
|
{ \
|
|
LINE_PIN18, /* COL_0 */ \
|
|
LINE_PIN14, /* COL_1 */ \
|
|
LINE_PIN15, /* COL_2 */ \
|
|
LINE_PIN20, /* COL_3 */ \
|
|
LINE_PIN22, /* COL_4 */ \
|
|
LINE_PIN19, /* COL_5 */ \
|
|
LINE_PIN6 /* COL_6 */ \
|
|
}
|
|
|
|
|
|
/* COL2ROW or ROW2COL */
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
#define IGNORE_MOD_TAP_INTERRUPT
|
|
|
|
// The Teensy 4.1 consumes about 100 mA of current at its full speed of 600 MHz
|
|
// as per https://www.pjrc.com/store/teensy41.html
|
|
#define USB_MAX_POWER_CONSUMPTION 100
|
|
|
|
/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
|
|
* AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
|
|
* i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
|
|
* No additional delay is necessary. */
|
|
|
|
// in clock cycles
|
|
#define GPIO_INPUT_PIN_DELAY 0
|