218 lines
9.4 KiB
C
218 lines
9.4 KiB
C
#include "qp_internal.h"
|
|
#include "qp_comms.h"
|
|
#include "qp_surface_internal.h"
|
|
#include "qp_oled_panel.h"
|
|
#include "qp_sh1107.h"
|
|
#include "qp_sh1107_opcodes.h"
|
|
#include "qp_surface.h"
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Driver storage
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
typedef struct sh1107_device_t {
|
|
oled_panel_painter_device_t oled;
|
|
|
|
uint8_t framebuffer[SURFACE_REQUIRED_BUFFER_BYTE_SIZE(128, 128, 1)];
|
|
} sh1107_device_t;
|
|
|
|
static sh1107_device_t sh1107_drivers[SH1107_NUM_DEVICES] = {0};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter API implementations
|
|
|
|
// Initialisation
|
|
__attribute__((weak)) bool qp_sh1107_init(painter_device_t device, painter_rotation_t rotation) {
|
|
sh1107_device_t *driver = (sh1107_device_t *)device;
|
|
|
|
// Change the surface geometry based on the panel rotation
|
|
if (rotation == QP_ROTATION_90 || rotation == QP_ROTATION_270) {
|
|
driver->oled.surface.base.panel_width = driver->oled.base.panel_height;
|
|
driver->oled.surface.base.panel_height = driver->oled.base.panel_width;
|
|
} else {
|
|
driver->oled.surface.base.panel_width = driver->oled.base.panel_width;
|
|
driver->oled.surface.base.panel_height = driver->oled.base.panel_height;
|
|
}
|
|
|
|
// Init the internal surface
|
|
if (!qp_init(&driver->oled.surface.base, QP_ROTATION_0)) {
|
|
qp_dprintf("Failed to init internal surface in qp_sh1107_init\n");
|
|
return false;
|
|
}
|
|
|
|
// clang-format off
|
|
uint8_t sh1107_init_sequence[] = {
|
|
// Command, Delay, N, Data[N]
|
|
SH1107_SET_MUX_RATIO, 0, 1, 0x7F, // 1/128 duty
|
|
SH1107_DISPLAY_OFFSET, 0, 1, 0x00,
|
|
SH1107_SET_START_LINE, 0, 1, 0x00, // Different from SH1106
|
|
SH1107_SET_SEGMENT_REMAP_INV, 0, 0,
|
|
SH1107_COM_SCAN_DIR_DEC, 0, 0,
|
|
SH1107_COM_PADS_HW_CFG, 0, 1, 0x12,
|
|
SH1107_SET_CONTRAST, 0, 1, 0x7F,
|
|
SH1107_ALL_ON_RESUME, 0, 0,
|
|
SH1107_NON_INVERTING_DISPLAY, 0, 0,
|
|
SH1107_SET_OSC_DIVFREQ, 0, 1, 0x80,
|
|
SH1107_SET_CHARGE_PUMP, 0, 1, 0x14,
|
|
SH1107_DISPLAY_ON, 0, 0,
|
|
};
|
|
// clang-format on
|
|
|
|
// If the display width is anything other than the default 128 pixels, change SH1107_SET_MUX_RATIO data byte to the correct value.
|
|
if (driver->oled.base.panel_width != 128) {
|
|
sh1107_init_sequence[3] = driver->oled.base.panel_width - 1;
|
|
}
|
|
|
|
// If the display width is less than the default 128 pixels, change SH1107_DISPLAY_OFFSET to use the center columns.
|
|
if (driver->oled.base.panel_width < 128) {
|
|
sh1107_init_sequence[7] = (128U - driver->oled.base.panel_width) / 2;
|
|
}
|
|
|
|
// For smaller displays, change SH1107_COM_PADS_HW_CFG data byte from alternative (0x12) to sequential (0x02) configuration
|
|
if (driver->oled.base.panel_height <= 64) {
|
|
sh1107_init_sequence[20] = 0x02;
|
|
}
|
|
|
|
qp_comms_bulk_command_sequence(device, sh1107_init_sequence, sizeof(sh1107_init_sequence));
|
|
return true;
|
|
}
|
|
|
|
// Screen flush
|
|
bool qp_sh1107_flush(painter_device_t device) {
|
|
sh1107_device_t *driver = (sh1107_device_t *)device;
|
|
|
|
if (!driver->oled.surface.dirty.is_dirty) {
|
|
return true;
|
|
}
|
|
|
|
switch (driver->oled.base.rotation) {
|
|
default:
|
|
case QP_ROTATION_0:
|
|
qp_oled_panel_page_column_flush_rot0(device, &driver->oled.surface.dirty, driver->framebuffer);
|
|
break;
|
|
case QP_ROTATION_90:
|
|
qp_oled_panel_page_column_flush_rot90(device, &driver->oled.surface.dirty, driver->framebuffer);
|
|
break;
|
|
case QP_ROTATION_180:
|
|
qp_oled_panel_page_column_flush_rot180(device, &driver->oled.surface.dirty, driver->framebuffer);
|
|
break;
|
|
case QP_ROTATION_270:
|
|
qp_oled_panel_page_column_flush_rot270(device, &driver->oled.surface.dirty, driver->framebuffer);
|
|
break;
|
|
}
|
|
|
|
// Clear the dirty area
|
|
qp_flush(&driver->oled.surface);
|
|
|
|
return true;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Driver vtable
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
const oled_panel_painter_driver_vtable_t sh1107_driver_vtable = {
|
|
.base =
|
|
{
|
|
.init = qp_sh1107_init,
|
|
.power = qp_oled_panel_power,
|
|
.clear = qp_oled_panel_clear,
|
|
.flush = qp_sh1107_flush,
|
|
.pixdata = qp_oled_panel_passthru_pixdata,
|
|
.viewport = qp_oled_panel_passthru_viewport,
|
|
.palette_convert = qp_oled_panel_passthru_palette_convert,
|
|
.append_pixels = qp_oled_panel_passthru_append_pixels,
|
|
.append_pixdata = qp_oled_panel_passthru_append_pixdata,
|
|
},
|
|
.opcodes =
|
|
{
|
|
.display_on = SH1107_DISPLAY_ON,
|
|
.display_off = SH1107_DISPLAY_OFF,
|
|
.set_page = SH1107_PAGE_ADDR,
|
|
.set_column_lsb = SH1107_SETCOLUMN_LSB,
|
|
.set_column_msb = SH1107_SETCOLUMN_MSB,
|
|
},
|
|
};
|
|
|
|
#ifdef QUANTUM_PAINTER_SH1107_SPI_ENABLE
|
|
// Factory function for creating a handle to the SH1107 device
|
|
painter_device_t qp_sh1107_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
|
|
for (uint32_t i = 0; i < SH1107_NUM_DEVICES; ++i) {
|
|
sh1107_device_t *driver = &sh1107_drivers[i];
|
|
if (!driver->oled.base.driver_vtable) {
|
|
painter_device_t surface = qp_make_mono1bpp_surface_advanced(&driver->oled.surface, 1, panel_width, panel_height, driver->framebuffer);
|
|
if (!surface) {
|
|
return NULL;
|
|
}
|
|
|
|
// Setup the OLED device
|
|
driver->oled.base.driver_vtable = (const painter_driver_vtable_t *)&sh1107_driver_vtable;
|
|
driver->oled.base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
|
|
driver->oled.base.native_bits_per_pixel = 1; // 1bpp mono
|
|
driver->oled.base.panel_width = panel_width;
|
|
driver->oled.base.panel_height = panel_height;
|
|
driver->oled.base.rotation = QP_ROTATION_0;
|
|
driver->oled.base.offset_x = 0;
|
|
driver->oled.base.offset_y = 0;
|
|
|
|
// SPI and other pin configuration
|
|
driver->oled.base.comms_config = &driver->oled.spi_dc_reset_config;
|
|
driver->oled.spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
|
|
driver->oled.spi_dc_reset_config.spi_config.divisor = spi_divisor;
|
|
driver->oled.spi_dc_reset_config.spi_config.lsb_first = false;
|
|
driver->oled.spi_dc_reset_config.spi_config.mode = spi_mode;
|
|
driver->oled.spi_dc_reset_config.dc_pin = dc_pin;
|
|
driver->oled.spi_dc_reset_config.reset_pin = reset_pin;
|
|
driver->oled.spi_dc_reset_config.command_params_uses_command_pin = true;
|
|
|
|
if (!qp_internal_register_device((painter_device_t)driver)) {
|
|
memset(driver, 0, sizeof(sh1107_device_t));
|
|
return NULL;
|
|
}
|
|
|
|
return (painter_device_t)driver;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
#endif // QUANTUM_PAINTER_SH1107_SPI_ENABLE
|
|
|
|
#ifdef QUANTUM_PAINTER_SH1107_I2C_ENABLE
|
|
// Factory function for creating a handle to the SH1107 device
|
|
painter_device_t qp_sh1107_make_i2c_device(uint16_t panel_width, uint16_t panel_height, uint8_t i2c_address) {
|
|
for (uint32_t i = 0; i < SH1107_NUM_DEVICES; ++i) {
|
|
sh1107_device_t *driver = &sh1107_drivers[i];
|
|
if (!driver->oled.base.driver_vtable) {
|
|
// Instantiate the surface
|
|
painter_device_t surface = qp_make_mono1bpp_surface_advanced(&driver->oled.surface, 1, panel_width, panel_height, driver->framebuffer);
|
|
if (!surface) {
|
|
return NULL;
|
|
}
|
|
|
|
// Setup the OLED device
|
|
driver->oled.base.driver_vtable = (const painter_driver_vtable_t *)&sh1107_driver_vtable;
|
|
driver->oled.base.comms_vtable = (const painter_comms_vtable_t *)&i2c_comms_cmddata_vtable;
|
|
driver->oled.base.native_bits_per_pixel = 1; // 1bpp mono
|
|
driver->oled.base.panel_width = panel_width;
|
|
driver->oled.base.panel_height = panel_height;
|
|
driver->oled.base.rotation = QP_ROTATION_0;
|
|
driver->oled.base.offset_x = 0;
|
|
driver->oled.base.offset_y = 0;
|
|
|
|
// I2C configuration
|
|
driver->oled.base.comms_config = &driver->oled.i2c_config;
|
|
driver->oled.i2c_config.chip_address = i2c_address;
|
|
|
|
if (!qp_internal_register_device((painter_device_t)driver)) {
|
|
memset(driver, 0, sizeof(sh1107_device_t));
|
|
return NULL;
|
|
}
|
|
|
|
return (painter_device_t)driver;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
#endif // QUANTUM_PAINTER_SH1107_I2C_ENABLE
|