396 lines
13 KiB
C
396 lines
13 KiB
C
#include QMK_KEYBOARD_H
|
|
|
|
extern inline void ergodox_board_led_on(void);
|
|
extern inline void ergodox_right_led_1_on(void);
|
|
extern inline void ergodox_right_led_2_on(void);
|
|
extern inline void ergodox_right_led_3_on(void);
|
|
extern inline void ergodox_right_led_on(uint8_t led);
|
|
|
|
extern inline void ergodox_board_led_off(void);
|
|
extern inline void ergodox_right_led_1_off(void);
|
|
extern inline void ergodox_right_led_2_off(void);
|
|
extern inline void ergodox_right_led_3_off(void);
|
|
extern inline void ergodox_right_led_off(uint8_t led);
|
|
|
|
extern inline void ergodox_led_all_on(void);
|
|
extern inline void ergodox_led_all_off(void);
|
|
|
|
extern inline void ergodox_right_led_1_set(uint8_t n);
|
|
extern inline void ergodox_right_led_2_set(uint8_t n);
|
|
extern inline void ergodox_right_led_3_set(uint8_t n);
|
|
extern inline void ergodox_right_led_set(uint8_t led, uint8_t n);
|
|
|
|
extern inline void ergodox_led_all_set(uint8_t n);
|
|
|
|
keyboard_config_t keyboard_config;
|
|
|
|
bool i2c_initialized = 0;
|
|
i2c_status_t mcp23018_status = 0x20;
|
|
|
|
void matrix_init_kb(void) {
|
|
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
|
|
TCCR1A = 0b10101001; // set and configure fast PWM
|
|
TCCR1B = 0b00001001; // set and configure fast PWM
|
|
|
|
// (tied to Vcc for hardware convenience)
|
|
DDRB &= ~(1<<4); // set B(4) as input
|
|
PORTB &= ~(1<<4); // set B(4) internal pull-up disabled
|
|
|
|
// unused pins - C7, D4, D5, D7, E6
|
|
// set as input with internal pull-up enabled
|
|
DDRC &= ~(1<<7);
|
|
DDRD &= ~(1<<5 | 1<<4);
|
|
DDRE &= ~(1<<6);
|
|
PORTC |= (1<<7);
|
|
PORTD |= (1<<5 | 1<<4);
|
|
PORTE |= (1<<6);
|
|
|
|
keyboard_config.raw = eeconfig_read_kb();
|
|
ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4 );
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
if (keyboard_config.rgb_matrix_enable) {
|
|
rgb_matrix_set_flags(LED_FLAG_ALL);
|
|
} else {
|
|
rgb_matrix_set_flags(LED_FLAG_NONE);
|
|
}
|
|
#endif
|
|
|
|
ergodox_blink_all_leds();
|
|
|
|
matrix_init_user();
|
|
}
|
|
|
|
void ergodox_blink_all_leds(void)
|
|
{
|
|
ergodox_led_all_off();
|
|
ergodox_led_all_set(LED_BRIGHTNESS_DEFAULT);
|
|
ergodox_right_led_1_on();
|
|
_delay_ms(50);
|
|
ergodox_right_led_2_on();
|
|
_delay_ms(50);
|
|
ergodox_right_led_3_on();
|
|
_delay_ms(50);
|
|
#ifdef LEFT_LEDS
|
|
ergodox_left_led_1_on();
|
|
_delay_ms(50);
|
|
if (!mcp23018_status) {
|
|
mcp23018_status = ergodox_left_leds_update();
|
|
}
|
|
ergodox_left_led_2_on();
|
|
_delay_ms(50);
|
|
if (!mcp23018_status) {
|
|
mcp23018_status = ergodox_left_leds_update();
|
|
}
|
|
ergodox_left_led_3_on();
|
|
_delay_ms(50);
|
|
if (!mcp23018_status) {
|
|
mcp23018_status = ergodox_left_leds_update();
|
|
}
|
|
#endif
|
|
ergodox_right_led_1_off();
|
|
_delay_ms(50);
|
|
ergodox_right_led_2_off();
|
|
_delay_ms(50);
|
|
ergodox_right_led_3_off();
|
|
#ifdef LEFT_LEDS
|
|
_delay_ms(50);
|
|
ergodox_left_led_1_off();
|
|
if (!mcp23018_status) {
|
|
mcp23018_status = ergodox_left_leds_update();
|
|
}
|
|
_delay_ms(50);
|
|
ergodox_left_led_2_off();
|
|
if (!mcp23018_status) {
|
|
mcp23018_status = ergodox_left_leds_update();
|
|
}
|
|
_delay_ms(50);
|
|
ergodox_left_led_3_off();
|
|
if (!mcp23018_status) {
|
|
mcp23018_status = ergodox_left_leds_update();
|
|
}
|
|
#endif
|
|
|
|
//ergodox_led_all_on();
|
|
//_delay_ms(333);
|
|
ergodox_led_all_off();
|
|
}
|
|
|
|
uint8_t init_mcp23018(void) {
|
|
mcp23018_status = 0x20;
|
|
|
|
// I2C subsystem
|
|
|
|
// uint8_t sreg_prev;
|
|
// sreg_prev=SREG;
|
|
// cli();
|
|
|
|
if (i2c_initialized == 0) {
|
|
i2c_init(); // on pins D(1,0)
|
|
i2c_initialized = true;
|
|
_delay_ms(1000);
|
|
}
|
|
// i2c_init(); // on pins D(1,0)
|
|
// _delay_ms(1000);
|
|
|
|
// set pin direction
|
|
// - unused : input : 1
|
|
// - input : input : 1
|
|
// - driving : output : 0
|
|
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
i2c_stop();
|
|
|
|
// set pull-up
|
|
// - unused : on : 1
|
|
// - input : on : 1
|
|
// - driving : off : 0
|
|
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
|
|
|
out:
|
|
i2c_stop();
|
|
|
|
#ifdef LEFT_LEDS
|
|
if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update();
|
|
#endif // LEFT_LEDS
|
|
|
|
// SREG=sreg_prev;
|
|
|
|
return mcp23018_status;
|
|
}
|
|
|
|
#ifdef LEFT_LEDS
|
|
uint8_t ergodox_left_leds_update(void) {
|
|
if (mcp23018_status) { // if there was an error
|
|
return mcp23018_status;
|
|
}
|
|
#define LEFT_LED_1_SHIFT 7 // in MCP23018 port B
|
|
#define LEFT_LED_2_SHIFT 6 // in MCP23018 port B
|
|
#define LEFT_LED_3_SHIFT 7 // in MCP23018 port A
|
|
|
|
// set logical value (doesn't matter on inputs)
|
|
// - unused : hi-Z : 1
|
|
// - input : hi-Z : 1
|
|
// - driving : hi-Z : 1
|
|
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
|
|
if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(OLATA, ERGODOX_EZ_I2C_TIMEOUT);
|
|
if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(0b11111111
|
|
& ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT),
|
|
ERGODOX_EZ_I2C_TIMEOUT);
|
|
if (mcp23018_status) goto out;
|
|
mcp23018_status = i2c_write(0b11111111
|
|
& ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT)
|
|
& ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT),
|
|
ERGODOX_EZ_I2C_TIMEOUT);
|
|
if (mcp23018_status) goto out;
|
|
|
|
out:
|
|
i2c_stop();
|
|
return mcp23018_status;
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef SWAP_HANDS_ENABLE
|
|
__attribute__ ((weak))
|
|
// swap-hands action needs a matrix to define the swap
|
|
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
|
/* Left hand, matrix positions */
|
|
{{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}},
|
|
{{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}},
|
|
{{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
|
|
{{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
|
|
{{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
|
|
{{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
|
|
{{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
|
|
/* Right hand, matrix positions */
|
|
{{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
|
|
{{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
|
|
{{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
|
|
{{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
|
|
{{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
|
|
{{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
|
|
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
|
|
};
|
|
#endif
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
|
|
/* driver
|
|
* | R location
|
|
* | | G location
|
|
* | | | B location
|
|
* | | | | */
|
|
{0, C3_1, C2_1, C4_1}, // LED1 on right
|
|
{0, C6_1, C5_1, C7_1}, // LED2
|
|
{0, C4_2, C3_2, C5_2}, // LED3
|
|
{0, C7_2, C6_2, C8_2}, // LED4
|
|
{0, C2_3, C1_3, C3_3}, // LED5
|
|
{0, C5_3, C4_3, C6_3}, // LED6
|
|
{0, C8_3, C7_3, C9_3}, // LED7
|
|
{0, C2_4, C1_4, C3_4}, // LED8
|
|
{0, C6_4, C5_4, C7_4}, // LED9
|
|
{0, C2_5, C1_5, C3_5}, // LED10
|
|
{0, C7_5, C6_5, C8_5}, // LED11
|
|
{0, C2_6, C1_6, C3_6}, // LED12
|
|
{0, C5_6, C4_6, C6_6}, // LED13
|
|
{0, C8_6, C7_6, C9_6}, // LED14
|
|
{0, C2_7, C1_7, C3_7}, // LED15
|
|
{0, C5_7, C4_7, C6_7}, // LED16
|
|
{0, C2_8, C1_8, C3_8}, // LED17
|
|
{0, C5_8, C4_8, C6_8}, // LED18
|
|
|
|
{0, C3_9, C2_9, C4_9}, // LED19
|
|
{0, C6_9, C5_9, C7_9}, // LED20
|
|
{0, C4_10, C3_10, C5_10}, // LED21
|
|
{0, C7_10, C6_10, C8_10}, // LED22
|
|
{0, C2_11, C1_11, C3_11}, // LED23
|
|
{0, C5_11, C4_11, C6_11}, // LED24
|
|
|
|
{1, C3_1, C2_1, C4_1}, // LED1 on left
|
|
{1, C6_1, C5_1, C7_1}, // LED2
|
|
{1, C4_2, C3_2, C5_2}, // LED3
|
|
{1, C7_2, C6_2, C8_2}, // LED4
|
|
{1, C2_3, C1_3, C3_3}, // LED5
|
|
{1, C5_3, C4_3, C6_3}, // LED6
|
|
{1, C8_3, C7_3, C9_3}, // LED7
|
|
{1, C2_4, C1_4, C3_4}, // LED8
|
|
{1, C6_4, C5_4, C7_4}, // LED9
|
|
{1, C2_5, C1_5, C3_5}, // LED10
|
|
{1, C7_5, C6_5, C8_5}, // LED11
|
|
{1, C2_6, C1_6, C3_6}, // LED12
|
|
{1, C5_6, C4_6, C6_6}, // LED13
|
|
{1, C8_6, C7_6, C9_6}, // LED14
|
|
{1, C2_7, C1_7, C3_7}, // LED15
|
|
{1, C5_7, C4_7, C6_7}, // LED16
|
|
{1, C2_8, C1_8, C3_8}, // LED17
|
|
{1, C5_8, C4_8, C6_8}, // LED18
|
|
|
|
{1, C3_9, C2_9, C4_9}, // LED19
|
|
{1, C6_9, C5_9, C7_9}, // LED20
|
|
{1, C4_10, C3_10, C5_10}, // LED21
|
|
{1, C7_10, C6_10, C8_10}, // LED22
|
|
{1, C2_11, C1_11, C3_11}, // LED23
|
|
{1, C5_11, C4_11, C6_11} // LED24
|
|
};
|
|
|
|
|
|
led_config_t g_led_config = { {
|
|
{ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
|
|
{ 28, 33, 38, 43, 47, NO_LED },
|
|
{ 27, 32, 37, 42, 46, NO_LED },
|
|
{ 26, 31, 36, 41, 45, NO_LED },
|
|
{ 25, 30, 35, 40, 44, NO_LED },
|
|
{ 24, 29, 34, 39, NO_LED, NO_LED },
|
|
{ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
|
|
{ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
|
|
{ 0, 5, 10, 15, NO_LED, NO_LED },
|
|
{ 1, 6, 11, 16, 20, NO_LED },
|
|
{ 2, 7, 12, 17, 21, NO_LED },
|
|
{ 3, 8, 13, 18, 22, NO_LED },
|
|
{ 4, 9, 14, 19, 23, NO_LED },
|
|
{ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
|
|
}, {
|
|
{ 137, 0 }, { 154, 0 }, { 172, 0 }, { 189, 0 }, { 206, 0 }, { 137, 12 },
|
|
{ 154, 12 }, { 172, 12 }, { 189, 12 }, { 206, 12 }, { 137, 25 }, { 154, 25 },
|
|
{ 172, 25 }, { 189, 25 }, { 206, 25 }, { 137, 38 }, { 154, 38 }, { 172, 38 },
|
|
{ 189, 38 }, { 206, 38 }, { 154, 51 }, { 172, 51 }, { 189, 51 }, { 206, 51 },
|
|
{ 86, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 86, 12 },
|
|
{ 68, 12 }, { 51, 12 }, { 34, 12 }, { 17, 12 }, { 86, 25 }, { 68, 25 },
|
|
{ 51, 25 }, { 34, 25 }, { 17, 25 }, { 86, 38 }, { 68, 38 }, { 51, 38 },
|
|
{ 34, 38 }, { 17, 38 }, { 68, 51 }, { 51, 51 }, { 34, 51 }, { 17, 51 }
|
|
}, {
|
|
4, 4, 4, 4, 4, 4,
|
|
4, 4, 4, 4, 4, 4,
|
|
4, 4, 4, 4, 4, 4,
|
|
4, 4, 1, 1, 1, 1,
|
|
4, 4, 4, 4, 4, 4,
|
|
4, 4, 4, 4, 4, 4,
|
|
4, 4, 4, 4, 4, 4,
|
|
4, 4, 1, 1, 1, 1
|
|
} };
|
|
|
|
void suspend_power_down_kb(void) {
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
rgb_matrix_set_suspend_state(true);
|
|
suspend_power_down_user();
|
|
}
|
|
|
|
void suspend_wakeup_init_kb(void) {
|
|
rgb_matrix_set_suspend_state(false);
|
|
suspend_wakeup_init_user();
|
|
}
|
|
|
|
#ifdef ORYX_CONFIGURATOR
|
|
void keyboard_post_init_kb(void) {
|
|
rgb_matrix_enable_noeeprom();
|
|
keyboard_post_init_user();
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef ORYX_CONFIGURATOR
|
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
|
/* FIXME(skullydazed):
|
|
* Originally this code always ran no matter what process_record_user() did.
|
|
* With this PR it will only run if process_record_user() returns true. We
|
|
* should think through the implications here.
|
|
*/
|
|
switch (keycode) {
|
|
case LED_LEVEL:
|
|
if (record->event.pressed) {
|
|
keyboard_config.led_level++;
|
|
if (keyboard_config.led_level > 4) {
|
|
keyboard_config.led_level = 0;
|
|
}
|
|
ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4 );
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
layer_state_set_kb(layer_state);
|
|
}
|
|
break;
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
case TOGGLE_LAYER_COLOR:
|
|
if (record->event.pressed) {
|
|
keyboard_config.disable_layer_led ^= 1;
|
|
if (keyboard_config.disable_layer_led)
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
}
|
|
break;
|
|
case RGB_TOG:
|
|
if (record->event.pressed) {
|
|
switch (rgb_matrix_get_flags()) {
|
|
case LED_FLAG_ALL: {
|
|
rgb_matrix_set_flags(LED_FLAG_NONE);
|
|
keyboard_config.rgb_matrix_enable = false;
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
}
|
|
break;
|
|
default: {
|
|
rgb_matrix_set_flags(LED_FLAG_ALL);
|
|
keyboard_config.rgb_matrix_enable = true;
|
|
}
|
|
break;
|
|
}
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
}
|
|
return false;
|
|
#endif
|
|
}
|
|
return true;
|
|
}
|
|
#endif
|
|
|
|
void eeconfig_init_kb(void) { // EEPROM is getting reset!
|
|
keyboard_config.raw = 0;
|
|
keyboard_config.led_level = 4;
|
|
keyboard_config.rgb_matrix_enable = true;
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
eeconfig_init_user();
|
|
}
|