ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
qmk_firmware/Projects
History
Dean Camera 27f0ba6fc3 Fixed device state not being reset back to the default state if the host sets the address to 0x00. 
Fixed Set Configuration requests not being stalled until the host has set the device's address.

Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
2010-05-04 10:07:22 +00:00
..
AVRISP-MKII Fixed device state not being reset back to the default state if the host sets the address to 0x00. 2010-05-04 10:07:22 +00:00
Benito Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
Incomplete Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
LEDNotifier Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
Magstripe Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
MissileLauncher Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
RelayBoard Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
TemperatureDataLogger Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
USBtoSerial Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code. 2010-05-02 05:16:34 +00:00
Webserver Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
XPLAINBridge Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
makefile Added new Relay Controller Board project (thanks to OBinou). 2010-03-24 08:06:23 +00:00