237 lines
6.9 KiB
C
237 lines
6.9 KiB
C
#include "quantum.h"
|
|
#include "serial.h"
|
|
#include "print.h"
|
|
|
|
#include <ch.h>
|
|
#include <hal.h>
|
|
|
|
#ifndef USART_CR1_M0
|
|
# define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so
|
|
#endif
|
|
|
|
#ifndef USE_GPIOV1
|
|
// The default PAL alternate modes are used to signal that the pins are used for USART
|
|
# ifndef SERIAL_USART_TX_PAL_MODE
|
|
# define SERIAL_USART_TX_PAL_MODE 7
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef SERIAL_USART_DRIVER
|
|
# define SERIAL_USART_DRIVER SD1
|
|
#endif
|
|
|
|
#ifndef SERIAL_USART_CR1
|
|
# define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0) // parity enable, odd parity, 9 bit length
|
|
#endif
|
|
|
|
#ifndef SERIAL_USART_CR2
|
|
# define SERIAL_USART_CR2 (USART_CR2_STOP_1) // 2 stop bits
|
|
#endif
|
|
|
|
#ifndef SERIAL_USART_CR3
|
|
# define SERIAL_USART_CR3 0
|
|
#endif
|
|
|
|
#ifdef SOFT_SERIAL_PIN
|
|
# define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
|
|
#endif
|
|
|
|
#ifndef SELECT_SOFT_SERIAL_SPEED
|
|
# define SELECT_SOFT_SERIAL_SPEED 1
|
|
#endif
|
|
|
|
#ifdef SERIAL_USART_SPEED
|
|
// Allow advanced users to directly set SERIAL_USART_SPEED
|
|
#elif SELECT_SOFT_SERIAL_SPEED == 0
|
|
# define SERIAL_USART_SPEED 460800
|
|
#elif SELECT_SOFT_SERIAL_SPEED == 1
|
|
# define SERIAL_USART_SPEED 230400
|
|
#elif SELECT_SOFT_SERIAL_SPEED == 2
|
|
# define SERIAL_USART_SPEED 115200
|
|
#elif SELECT_SOFT_SERIAL_SPEED == 3
|
|
# define SERIAL_USART_SPEED 57600
|
|
#elif SELECT_SOFT_SERIAL_SPEED == 4
|
|
# define SERIAL_USART_SPEED 38400
|
|
#elif SELECT_SOFT_SERIAL_SPEED == 5
|
|
# define SERIAL_USART_SPEED 19200
|
|
#else
|
|
# error invalid SELECT_SOFT_SERIAL_SPEED value
|
|
#endif
|
|
|
|
#ifndef SERIAL_USART_TIMEOUT
|
|
# define SERIAL_USART_TIMEOUT 100
|
|
#endif
|
|
|
|
#define HANDSHAKE_MAGIC 7
|
|
|
|
static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) {
|
|
msg_t ret = sdWrite(driver, data, size);
|
|
|
|
// Half duplex requires us to read back the data we just wrote - just throw it away
|
|
uint8_t dump[size];
|
|
sdRead(driver, dump, size);
|
|
|
|
return ret;
|
|
}
|
|
#undef sdWrite
|
|
#define sdWrite sdWriteHalfDuplex
|
|
|
|
static inline msg_t sdWriteTimeoutHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size, uint32_t timeout) {
|
|
msg_t ret = sdWriteTimeout(driver, data, size, timeout);
|
|
|
|
// Half duplex requires us to read back the data we just wrote - just throw it away
|
|
uint8_t dump[size];
|
|
sdReadTimeout(driver, dump, size, timeout);
|
|
|
|
return ret;
|
|
}
|
|
#undef sdWriteTimeout
|
|
#define sdWriteTimeout sdWriteTimeoutHalfDuplex
|
|
|
|
static inline void sdClear(SerialDriver* driver) {
|
|
while (sdGetTimeout(driver, TIME_IMMEDIATE) != MSG_TIMEOUT) {
|
|
// Do nothing with the data
|
|
}
|
|
}
|
|
|
|
static SerialConfig sdcfg = {
|
|
(SERIAL_USART_SPEED), // speed - mandatory
|
|
(SERIAL_USART_CR1), // CR1
|
|
(SERIAL_USART_CR2), // CR2
|
|
(SERIAL_USART_CR3) // CR3
|
|
};
|
|
|
|
void handle_soft_serial_slave(void);
|
|
|
|
/*
|
|
* This thread runs on the slave and responds to transactions initiated
|
|
* by the master
|
|
*/
|
|
static THD_WORKING_AREA(waSlaveThread, 2048);
|
|
static THD_FUNCTION(SlaveThread, arg) {
|
|
(void)arg;
|
|
chRegSetThreadName("slave_transport");
|
|
|
|
while (true) {
|
|
handle_soft_serial_slave();
|
|
}
|
|
}
|
|
|
|
__attribute__((weak)) void usart_init(void) {
|
|
#if defined(USE_GPIOV1)
|
|
palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
|
|
#else
|
|
palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
|
|
#endif
|
|
}
|
|
|
|
void usart_master_init(void) {
|
|
usart_init();
|
|
|
|
sdcfg.cr3 |= USART_CR3_HDSEL;
|
|
sdStart(&SERIAL_USART_DRIVER, &sdcfg);
|
|
}
|
|
|
|
void usart_slave_init(void) {
|
|
usart_init();
|
|
|
|
sdcfg.cr3 |= USART_CR3_HDSEL;
|
|
sdStart(&SERIAL_USART_DRIVER, &sdcfg);
|
|
|
|
// Start transport thread
|
|
chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL);
|
|
}
|
|
|
|
static SSTD_t* Transaction_table = NULL;
|
|
static uint8_t Transaction_table_size = 0;
|
|
|
|
void soft_serial_initiator_init(SSTD_t* sstd_table, int sstd_table_size) {
|
|
Transaction_table = sstd_table;
|
|
Transaction_table_size = (uint8_t)sstd_table_size;
|
|
|
|
usart_master_init();
|
|
}
|
|
|
|
void soft_serial_target_init(SSTD_t* sstd_table, int sstd_table_size) {
|
|
Transaction_table = sstd_table;
|
|
Transaction_table_size = (uint8_t)sstd_table_size;
|
|
|
|
usart_slave_init();
|
|
}
|
|
|
|
void handle_soft_serial_slave(void) {
|
|
uint8_t sstd_index = sdGet(&SERIAL_USART_DRIVER); // first chunk is always transaction id
|
|
SSTD_t* trans = &Transaction_table[sstd_index];
|
|
|
|
// Always write back the sstd_index as part of a basic handshake
|
|
sstd_index ^= HANDSHAKE_MAGIC;
|
|
sdWrite(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index));
|
|
|
|
if (trans->initiator2target_buffer_size) {
|
|
sdRead(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size);
|
|
}
|
|
|
|
if (trans->target2initiator_buffer_size) {
|
|
sdWrite(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size);
|
|
}
|
|
|
|
if (trans->status) {
|
|
*trans->status = TRANSACTION_ACCEPTED;
|
|
}
|
|
}
|
|
|
|
/////////
|
|
// start transaction by initiator
|
|
//
|
|
// int soft_serial_transaction(int sstd_index)
|
|
//
|
|
// Returns:
|
|
// TRANSACTION_END
|
|
// TRANSACTION_NO_RESPONSE
|
|
// TRANSACTION_DATA_ERROR
|
|
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
|
int soft_serial_transaction(void) {
|
|
uint8_t sstd_index = 0;
|
|
#else
|
|
int soft_serial_transaction(int index) {
|
|
uint8_t sstd_index = index;
|
|
#endif
|
|
|
|
if (sstd_index > Transaction_table_size) return TRANSACTION_TYPE_ERROR;
|
|
SSTD_t* trans = &Transaction_table[sstd_index];
|
|
msg_t res = 0;
|
|
|
|
sdClear(&SERIAL_USART_DRIVER);
|
|
|
|
// First chunk is always transaction id
|
|
sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(SERIAL_USART_TIMEOUT));
|
|
|
|
uint8_t sstd_index_shake = 0xFF;
|
|
|
|
// Which we always read back first so that we can error out correctly
|
|
// - due to the half duplex limitations on return codes, we always have to read *something*
|
|
// - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready
|
|
res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(SERIAL_USART_TIMEOUT));
|
|
if (res < 0 || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
|
|
dprintf("serial::usart_shake NO_RESPONSE\n");
|
|
return TRANSACTION_NO_RESPONSE;
|
|
}
|
|
|
|
if (trans->initiator2target_buffer_size) {
|
|
res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT));
|
|
if (res < 0) {
|
|
dprintf("serial::usart_transmit NO_RESPONSE\n");
|
|
return TRANSACTION_NO_RESPONSE;
|
|
}
|
|
}
|
|
|
|
if (trans->target2initiator_buffer_size) {
|
|
res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT));
|
|
if (res < 0) {
|
|
dprintf("serial::usart_receive NO_RESPONSE\n");
|
|
return TRANSACTION_NO_RESPONSE;
|
|
}
|
|
}
|
|
|
|
return TRANSACTION_END;
|
|
}
|