Dean Camera 3d28d53c3e Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code. ... Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).		2010-05-02 05:16:34 +00:00
..
TINYNVM.c	Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.	2010-05-02 05:16:34 +00:00
TINYNVM.h	Fix AVRISP-MKII clone project's TPI Chip Erase command processing - ensure erase location is the high byte in the given address space, check NVMBUSY for completion rather than the NVM Bus Enable bit.	2010-02-08 03:16:09 +00:00
XMEGANVM.c	Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.	2010-05-02 05:16:34 +00:00
XMEGANVM.h	Cleanup and partially fix AVRISP-MKII project's TPI programming support.	2010-01-25 04:13:44 +00:00
XPROGProtocol.c	Add user callback function to the Bluetooth host demo to filter out connections from remote devices. Add in ability to reject connections based on their bluetooth device address.	2010-04-05 08:09:12 +00:00
XPROGProtocol.h	Clean up and add more comments to the AVRISP-MKII project. Make sure the SPI_MULTI command handler supports multiple packet responses. Use slightly smaller/faster repeated indirect-load commands when retrieving the PDI target's memory CRCs.	2010-01-17 04:39:33 +00:00
XPROGTarget.c	Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.	2010-05-02 05:16:34 +00:00
XPROGTarget.h	Software PDI mode breaks unless the software USART has 100 cycles between bits.	2010-03-17 11:48:39 +00:00