394 lines
13 KiB
C
394 lines
13 KiB
C
/*
|
|
LUFA Library
|
|
Copyright (C) Dean Camera, 2010.
|
|
|
|
dean [at] fourwalledcubicle [dot] com
|
|
www.fourwalledcubicle.com
|
|
*/
|
|
|
|
/*
|
|
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
|
|
|
Permission to use, copy, modify, distribute, and sell this
|
|
software and its documentation for any purpose is hereby granted
|
|
without fee, provided that the above copyright notice appear in
|
|
all copies and that both that the copyright notice and this
|
|
permission notice and warranty disclaimer appear in supporting
|
|
documentation, and that the name of the author not be used in
|
|
advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
The author disclaim all warranties with regard to this
|
|
software, including all implied warranties of merchantability
|
|
and fitness. In no event shall the author be liable for any
|
|
special, indirect or consequential damages or any damages
|
|
whatsoever resulting from loss of use, data or profits, whether
|
|
in an action of contract, negligence or other tortious action,
|
|
arising out of or in connection with the use or performance of
|
|
this software.
|
|
*/
|
|
|
|
/** \file
|
|
*
|
|
* Main source file for the MassStorageHost demo. This file contains the main tasks of
|
|
* the demo and is responsible for the initial application hardware configuration.
|
|
*/
|
|
|
|
#include "MassStorageHost.h"
|
|
|
|
/** Index of the highest available LUN (Logical Unit) in the attached Mass Storage Device */
|
|
uint8_t MassStore_MaxLUNIndex;
|
|
|
|
|
|
/** Main program entry point. This routine configures the hardware required by the application, then
|
|
* enters a loop to run the application tasks in sequence.
|
|
*/
|
|
int main(void)
|
|
{
|
|
SetupHardware();
|
|
|
|
puts_P(PSTR(ESC_FG_CYAN "Mass Storage Host Demo running.\r\n" ESC_FG_WHITE));
|
|
|
|
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
|
|
sei();
|
|
|
|
for (;;)
|
|
{
|
|
MassStorage_Task();
|
|
USB_USBTask();
|
|
}
|
|
}
|
|
|
|
/** Configures the board hardware and chip peripherals for the demo's functionality. */
|
|
void SetupHardware(void)
|
|
{
|
|
/* Disable watchdog if enabled by bootloader/fuses */
|
|
MCUSR &= ~(1 << WDRF);
|
|
wdt_disable();
|
|
|
|
/* Disable clock division */
|
|
clock_prescale_set(clock_div_1);
|
|
|
|
/* Hardware Initialization */
|
|
SerialStream_Init(9600, false);
|
|
LEDs_Init();
|
|
Buttons_Init();
|
|
USB_Init();
|
|
}
|
|
|
|
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
|
|
* starts the library USB task to begin the enumeration and USB management process.
|
|
*/
|
|
void EVENT_USB_Host_DeviceAttached(void)
|
|
{
|
|
puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
|
|
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
|
|
}
|
|
|
|
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
|
|
* stops the library USB task management process.
|
|
*/
|
|
void EVENT_USB_Host_DeviceUnattached(void)
|
|
{
|
|
puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
|
|
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
|
|
}
|
|
|
|
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
|
|
* enumerated by the host and is now ready to be used by the application.
|
|
*/
|
|
void EVENT_USB_Host_DeviceEnumerationComplete(void)
|
|
{
|
|
LEDs_SetAllLEDs(LEDMASK_USB_READY);
|
|
}
|
|
|
|
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
|
|
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
|
|
{
|
|
USB_ShutDown();
|
|
|
|
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
|
|
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
|
|
|
|
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
|
|
for(;;);
|
|
}
|
|
|
|
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
|
|
* enumerating an attached USB device.
|
|
*/
|
|
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
|
|
{
|
|
printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
|
|
" -- Error Code %d\r\n"
|
|
" -- Sub Error Code %d\r\n"
|
|
" -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
|
|
|
|
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
|
|
}
|
|
|
|
/** Task to set the configuration of the attached device after it has been enumerated, and to read in blocks from
|
|
* the device and print them to the serial port.
|
|
*/
|
|
void MassStorage_Task(void)
|
|
{
|
|
uint8_t ErrorCode;
|
|
|
|
switch (USB_HostState)
|
|
{
|
|
case HOST_STATE_Addressed:
|
|
puts_P(PSTR("Getting Config Data.\r\n"));
|
|
|
|
/* Get and process the configuration descriptor data */
|
|
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
|
|
{
|
|
if (ErrorCode == ControlError)
|
|
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
|
|
else
|
|
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
|
|
|
|
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
|
|
|
|
/* Indicate error via status LEDs */
|
|
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
|
|
|
|
/* Wait until USB device disconnected */
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
|
|
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
|
|
{
|
|
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
|
|
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
|
|
|
|
/* Indicate error via status LEDs */
|
|
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
|
|
|
|
/* Wait until USB device disconnected */
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
puts_P(PSTR("Mass Storage Disk Enumerated.\r\n"));
|
|
|
|
USB_HostState = HOST_STATE_Configured;
|
|
break;
|
|
case HOST_STATE_Configured:
|
|
/* Indicate device busy via the status LEDs */
|
|
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
|
|
|
|
/* Send the request, display error and wait for device detach if request fails */
|
|
if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)
|
|
{
|
|
ShowDiskReadError(PSTR("Get Max LUN"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Print number of LUNs detected in the attached device */
|
|
printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MassStore_MaxLUNIndex + 1));
|
|
|
|
/* Reset the Mass Storage device interface, ready for use */
|
|
if ((ErrorCode = MassStore_MassStorageReset()) != HOST_SENDCONTROL_Successful)
|
|
{
|
|
ShowDiskReadError(PSTR("Mass Storage Reset"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Get sense data from the device - many devices will not accept any other commands until the sense data
|
|
* is read - both on start-up and after a failed command */
|
|
SCSI_Request_Sense_Response_t SenseData;
|
|
if ((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0)
|
|
{
|
|
ShowDiskReadError(PSTR("Request Sense"), ErrorCode);
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Set the prevent removal flag for the device, allowing it to be accessed */
|
|
if ((ErrorCode = MassStore_PreventAllowMediumRemoval(0, true)) != 0)
|
|
{
|
|
ShowDiskReadError(PSTR("Prevent/Allow Medium Removal"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Get inquiry data from the device */
|
|
SCSI_Inquiry_Response_t InquiryData;
|
|
if ((ErrorCode = MassStore_Inquiry(0, &InquiryData)) != 0)
|
|
{
|
|
ShowDiskReadError(PSTR("Inquiry"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Print vendor and product names of attached device */
|
|
printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
|
|
|
|
/* Wait until disk ready */
|
|
puts_P(PSTR("Waiting until ready.."));
|
|
|
|
for (;;)
|
|
{
|
|
Serial_TxByte('.');
|
|
|
|
/* Abort if device removed */
|
|
if (USB_HostState == HOST_STATE_Unattached)
|
|
break;
|
|
|
|
/* Check to see if the attached device is ready for new commands */
|
|
ErrorCode = MassStore_TestUnitReady(0);
|
|
|
|
/* If attached device is ready, abort the loop */
|
|
if (!(ErrorCode))
|
|
break;
|
|
|
|
/* If an error other than a logical command failure (indicating device busy) returned, abort */
|
|
if (ErrorCode != MASS_STORE_SCSI_COMMAND_FAILED)
|
|
{
|
|
ShowDiskReadError(PSTR("Test Unit Ready"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
}
|
|
|
|
puts_P(PSTR("\r\nRetrieving Capacity... "));
|
|
|
|
/* Create new structure for the disk's capacity in blocks and block size */
|
|
SCSI_Capacity_t DiskCapacity;
|
|
|
|
/* Retrieve disk capacity */
|
|
if ((ErrorCode = MassStore_ReadCapacity(0, &DiskCapacity)) != 0)
|
|
{
|
|
ShowDiskReadError(PSTR("Read Capacity"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Display the disk capacity in blocks * block size bytes */
|
|
printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
|
|
|
|
/* Create a new buffer capable of holding a single block from the device */
|
|
uint8_t BlockBuffer[DiskCapacity.BlockSize];
|
|
|
|
/* Read in the first 512 byte block from the device */
|
|
if ((ErrorCode = MassStore_ReadDeviceBlock(0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0)
|
|
{
|
|
ShowDiskReadError(PSTR("Read Device Block"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
puts_P(PSTR("\r\nContents of first block:\r\n"));
|
|
|
|
/* Print out the first block in both HEX and ASCII, 16 bytes per line */
|
|
for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
|
|
{
|
|
/* Pointer to the start of the current 16-byte chunk in the read block of data */
|
|
uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
|
|
|
|
/* Print out the 16 bytes of the chunk in HEX format */
|
|
for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
|
|
{
|
|
char CurrByte = *(ChunkPtr + ByteOffset);
|
|
|
|
printf_P(PSTR("%.2X "), CurrByte);
|
|
}
|
|
|
|
puts_P(PSTR(" "));
|
|
|
|
/* Print out the 16 bytes of the chunk in ASCII format */
|
|
for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
|
|
{
|
|
char CurrByte = *(ChunkPtr + ByteOffset);
|
|
|
|
putchar(isprint(CurrByte) ? CurrByte : '.');
|
|
}
|
|
|
|
puts_P(PSTR("\r\n"));
|
|
}
|
|
|
|
puts_P(PSTR("\r\n\r\nPress board button to read entire ASCII contents of disk...\r\n\r\n"));
|
|
|
|
/* Wait for the board button to be pressed */
|
|
while (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
|
|
{
|
|
/* Abort if device removed */
|
|
if (USB_HostState == HOST_STATE_Unattached)
|
|
break;
|
|
}
|
|
|
|
/* Abort if device removed */
|
|
if (USB_HostState == HOST_STATE_Unattached)
|
|
break;
|
|
|
|
/* Print out the entire disk contents in ASCII format */
|
|
for (uint32_t CurrBlockAddress = 0; CurrBlockAddress < DiskCapacity.Blocks; CurrBlockAddress++)
|
|
{
|
|
/* Read in the next block of data from the device */
|
|
if ((ErrorCode = MassStore_ReadDeviceBlock(0, CurrBlockAddress, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0)
|
|
{
|
|
ShowDiskReadError(PSTR("Read Device Block"), ErrorCode);
|
|
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
|
|
/* Send the ASCII data in the read in block to the serial port */
|
|
for (uint16_t Byte = 0; Byte < DiskCapacity.BlockSize; Byte++)
|
|
{
|
|
char CurrByte = BlockBuffer[Byte];
|
|
|
|
putchar(isprint(CurrByte) ? CurrByte : '.');
|
|
}
|
|
|
|
/* Abort if device removed */
|
|
if (USB_HostState == HOST_STATE_Unattached)
|
|
break;
|
|
}
|
|
|
|
/* Indicate device no longer busy */
|
|
LEDs_SetAllLEDs(LEDMASK_USB_READY);
|
|
|
|
/* Wait until USB device disconnected */
|
|
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** Indicates that a communication error has occurred with the attached Mass Storage Device,
|
|
* printing error codes to the serial port and waiting until the device is removed before
|
|
* continuing.
|
|
*
|
|
* \param[in] CommandString ASCII string located in PROGMEM space indicating what operation failed
|
|
* \param[in] ErrorCode Error code of the function which failed to complete successfully
|
|
*/
|
|
void ShowDiskReadError(char* CommandString, uint8_t ErrorCode)
|
|
{
|
|
if (ErrorCode == MASS_STORE_SCSI_COMMAND_FAILED)
|
|
{
|
|
/* Display the error code */
|
|
printf_P(PSTR(ESC_FG_RED "SCSI command error (%S).\r\n"), CommandString);
|
|
}
|
|
else
|
|
{
|
|
/* Display the error code */
|
|
printf_P(PSTR(ESC_FG_RED "Command error (%S).\r\n"), CommandString);
|
|
printf_P(PSTR(" -- Error Code: %d" ESC_FG_WHITE), ErrorCode);
|
|
}
|
|
|
|
Pipe_Freeze();
|
|
|
|
/* Indicate device error via the status LEDs */
|
|
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
|
|
}
|