eeb6443767
* add i2c lib submodule * add actuation point adjustment to fc980c * add actuation point adjustment to fc660c also. * use https for i2c submodule * move to existing i2c lib * properly remove old submodule * oops, forgot some files for the fc660c
89 lines
2.4 KiB
C
89 lines
2.4 KiB
C
/*
|
|
Copyright 2017 Balz Guenat
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef CONFIG_H
|
|
#define CONFIG_H
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0xFEED
|
|
#define PRODUCT_ID 0x660C
|
|
#define DEVICE_VER 0x0100
|
|
#define MANUFACTURER QMK
|
|
#define PRODUCT Leopold FC660C with QMK
|
|
#define DESCRIPTION Leopold FC660C with Hasu alternative controller using QMK
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 8
|
|
#define MATRIX_COLS 16
|
|
|
|
#define DIODE_DIRECTION CUSTOM_MATRIX
|
|
|
|
/* define if matrix has ghost */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* number of backlight levels */
|
|
// #define BACKLIGHT_LEVELS 1
|
|
|
|
/* mapping backlight LEDs to correct Pin */
|
|
// #define BACKLIGHT_PIN B7
|
|
|
|
/* Set 0 if debouncing isn't needed */
|
|
#define DEBOUNCING_DELAY 0
|
|
#define TAPPING_TERM 175
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
// #define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
// #define LOCKING_RESYNC_ENABLE
|
|
|
|
/* key combination for command */
|
|
#define IS_COMMAND() ( \
|
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
)
|
|
|
|
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
#define USE_I2C
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|
|
|
|
// higher value means deeper actuation point, less sensitive
|
|
// be careful and only make small adjustments (steps of 1 or 2).
|
|
// too high and keys will fail to actuate. too low and keys will actuate spontaneously.
|
|
// test all keys before further adjustment.
|
|
// this should probably stay in the range +/-5.
|
|
// #define ACTUATION_DEPTH_ADJUSTMENT 0
|
|
|
|
#endif
|