ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
933 commits 55 branches 1460 tags 329 MiB
Commit graph

101 commits

Author SHA1 Message Date
Dean Camera
d3e00ce1ec Rename the AVRISP main source files to AVRISP-MKII so that it matches the project name. Add AVRStudio project file for the AVRISP-MKII project. 2010-07-13 04:16:23 +00:00
Dean Camera
ae9dab1398 Add missing clean_doxygen phony targets to the project makefiles. 2010-07-12 10:18:18 +00:00
Dean Camera
70983caea5 Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop. 2010-07-08 07:44:07 +00:00
Dean Camera
8b053d6ba5 Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request. 
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
 2010-07-02 03:37:19 +00:00
Dean Camera
d29a408ffd Add default "all" makefile targets to the demo tree makefiles. 2010-06-25 13:28:34 +00:00
Dean Camera
016a4c068a Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather than looping on the timeout value, as this is already checked inside the loop anyway. 2010-06-25 13:19:05 +00:00
Dean Camera
988604b25d Moved calls to V2Params_UpdateParamValues() out of the main AVRISP-MKII and XPLAINBridge project loops and into the AVRISP management function. 2010-06-21 13:39:56 +00:00
Dean Camera
51c2dcf3b0 Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project. 2010-06-17 09:17:09 +00:00
Dean Camera
711542ee89 Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better. 2010-06-16 11:01:01 +00:00
Dean Camera
a14ece5f57 Change over Doxygen \note documentation to \pre where applicable. 2010-06-15 03:34:55 +00:00
Dean Camera
fc92f9969c Minor documentation cleanups. 2010-06-03 15:32:45 +00:00
Dean Camera
008e0e2e0a Add start of RFCOMM service layer to the incomplete BluetoothHost demo. 
Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.
 2010-06-03 03:58:57 +00:00
Dean Camera
3b95b8dedc Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor. 
Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.
 2010-05-27 10:36:21 +00:00
Dean Camera
670413603f The EEPROM stream read/write functions now use eeprom_update_byte() instead of eeprom_write_byte(), so that only changed bytes are written to EEPROM to preserve its lifespan. 
Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile parameters to EEPROM to preserve its lifespan.
 2010-05-26 11:54:55 +00:00
Dean Camera
9c037a952f The RingBuff library code has been replaced in the XPLAINBridge project with an ultra lightweight buffer to help improve the reliability of the bridge. 2010-05-26 06:15:05 +00:00
Dean Camera
776485a6c5 Remove obsolete entry from the Doxygen configuration files. 2010-05-23 08:39:02 +00:00
Dean Camera
3e515cdfa8 Short UUIDs are measured in bytes, not bits -- update Service Discovery Protocol code so that it can now correctly match against UUIDs in the service table. 2010-05-20 13:06:04 +00:00
Dean Camera
f13bc35a19 Begin processing code for Service Discovery Protocol attributes. 2010-05-17 23:36:05 +00:00
Dean Camera
ff61dfa505 Fixed AVRISP project not sending a full erase-and-write EEPROM command to XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush). 2010-05-16 05:43:03 +00:00
Dean Camera
80d85090ba Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from the last page of FLASH. 2010-05-14 10:11:40 +00:00
Dean Camera
34047efc7e Remove incorrect check for the current device state in the Set Configuration request handler of DevChapter9, which broke Set Configuration requests to the device under most circumstances. 
Move out the SPI prescaler list to a PROGMEM module-level variable in ISPTarget.c.
 2010-05-13 12:57:49 +00:00
Dean Camera
571159df1b Additional fix to the AVRISP-MKII clone project for 256KB AVRs. 2010-05-13 11:14:10 +00:00
Dean Camera
cd0093a14b Fixed AVRISP-MKII clone project not correctly issuing SET EXTENDED ADDRESS commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton). 
Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
 2010-05-13 09:25:17 +00:00
Dean Camera
d3c623e1e1 The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver. 
Fix Benito makefile which was accidentally changed during testing.
 2010-05-13 07:31:27 +00:00
Dean Camera
071e02c6b6 Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 2010-05-08 03:12:14 +00:00
Dean Camera
e331b531c6 Change over instances of "make" in the makefiles to "$(MAKE)" to allow for the make tool to be overridden. 2010-05-07 07:11:25 +00:00
Dean Camera
ab8668b14e Removed software PDI/TPI emulation from the AVRISP-MKII clone project, as it was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header. 2010-05-04 11:33:51 +00:00
Dean Camera
27f0ba6fc3 Fixed device state not being reset back to the default state if the host sets the address to 0x00. 
Fixed Set Configuration requests not being stalled until the host has set the device's address.

Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
 2010-05-04 10:07:22 +00:00
Dean Camera
eed7d4df6a Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus is suspended before or during a transfer. 2010-05-03 07:41:22 +00:00
Dean Camera
5c0c0327d5 Increase hardware PDI/TPI programming speed to 1MHz in the AVRISP MKII clone project. 2010-05-02 06:18:42 +00:00
Dean Camera
a5e79333e5 Switch back to C based timeout ISR in the AVRISP project - assembly version was failing, and only one or two cycles could be shaved off the compiler generated code. 2010-05-02 06:02:54 +00:00
Dean Camera
3d28d53c3e Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code. 
Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
 2010-05-02 05:16:34 +00:00
Dean Camera
9a1560dc05 Make sure that long reads are aborted early if the connection times out while waiting on more bytes in the AVRISP MKII clone project. 2010-04-30 08:33:21 +00:00
Dean Camera
ceb16ee24f Make sure that the NVM bus/controller busy waits in the AVRISP MKII clone project abort properly if a timeout occurs while waiting for a response. 2010-04-30 08:27:21 +00:00
Dean Camera
e977774d4e Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent. 2010-04-28 08:15:16 +00:00
Dean Camera
59c4871f80 USB_Init() no longer calls sei() to enable global interrupts - this must now be done in the user application once all init code has run. 2010-04-28 07:48:26 +00:00
Dean Camera
85aaaf84ce Make AVRISP-MKII clone project's software PDI/TPI mode more robust by keeping track of timeouts while waiting for a Tx/Rx to finish. 2010-04-28 06:33:48 +00:00
Dean Camera
5993e1efe7 Added ability to search by Channel PSM to the GetChannelData() function in the BluetoothHost demo. 
Added new HCI states to properly initialize the bluetooth dongle and retrieve the local BDADDR.

Factored out Bluetooth state information into a new state structure for easy reference in the user application.

Added new StackInitialized() Bluetooth stack callback function.
 2010-04-22 14:08:00 +00:00
Dean Camera
ee74b4948f Add information request/response signal handler to the Bluetooth Host demo. 
Ensure that the AVRISP-MKII project's Windows avrdude compatibility define is named properly in all parts of the code.
 2010-04-06 02:48:47 +00:00
Dean Camera
fa1a092901 Add user callback function to the Bluetooth host demo to filter out connections from remote devices. Add in ability to reject connections based on their bluetooth device address. 
Clean up RelayBoard project code.

Make AVRISP project clear the XMEGA target's reset register twice; this does not appear to take affect properly the first time under some circumstances.
 2010-04-05 08:09:12 +00:00
Dean Camera
c9148f9b47 Added WIN_LIBUSB_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows builds of avrdude at the expense of AVRStudio compatibility. 2010-03-31 09:20:24 +00:00
Dean Camera
49b09a2042 Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders and projects. 
Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.
 2010-03-22 07:12:25 +00:00
Dean Camera
72527867f6 Remove redundant check in the software PDI programming code of the AVRISP project. 2010-03-17 13:07:22 +00:00
Dean Camera
9a5ae36a4f Software PDI mode breaks unless the software USART has 100 cycles between bits. 2010-03-17 11:48:39 +00:00
Dean Camera
2b74b517ea Don't enable the pullup on the target /RESET line in the AVRISP project for PDI mode - clearing the XMEGA's reset control register twice is enough to release it from reset. Possible silicon bug, since the official Atmel programmers have the same issue. 2010-03-16 12:09:22 +00:00
Dean Camera
39d56aeffe Fixed PDI programming mode in the AVRISP programmer project not exiting programming mode correctly (clear target Reset key twice, set /RESET pin to pullup). 
Add newlines to the MIDI event printf() statements in the MIDI host demos.
 2010-03-16 11:47:11 +00:00
Dean Camera
071fd8ce53 Revert changes made for the partial port to the AVR32 architecture. 2010-02-24 06:58:23 +00:00
Dean Camera
e11fddfe66 Update Temperature board driver to be AVR32 compatible when the ADC peripheral driver is eventually ported. Make architecture includes explicit for both the AVR32 and the AVR8, to make way for future architecture ports. 
Add SPI driver aliases for the old function names in the AVR8 driver, so that existing code will still compile against the new version.
 2010-02-23 03:51:17 +00:00
Dean Camera
c24027f3b5 Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin. 
Fix broken AVR8 Serial peripheral driver.
 2010-02-23 01:03:27 +00:00
Dean Camera
d2851b3351 Oops - need to revert changes made to ease testing of the software PDI programming mode. 2010-02-21 22:15:52 +00:00