add pin mapping and sweet16 test

quantum/config_common.h

@@ -125,6 +125,39 @@
     #endif
 
 #elif defined(PROTOCOL_CHIBIOS)
+  #ifdef PROTON_CONVERSION
+    // Left side (front)
+    #define D3 PAL_LINE(GPIOA, 9)
+    #define D2 PAL_LINE(GPIOA, 10)
+    //      GND
+    //      GND
+    #define D1 PAL_LINE(GPIOB, 7)
+    #define D0 PAL_LINE(GPIOB, 6)
+    #define D4 PAL_LINE(GPIOB, 5)
+    #define C6 PAL_LINE(GPIOB, 4)
+    #define C7 PAL_LINE(GPIOB, 3)
+    #define E6 PAL_LINE(GPIOB, 2)
+    #define B4 PAL_LINE(GPIOB, 1)
+    #define B5 PAL_LINE(GPIOB, 0)
+
+    // Right side (front)
+    //      RAW
+    //      GND
+    //      RESET
+    //      VCC
+    #define F4 PAL_LINE(GPIOA, 2)
+    #define F5 PAL_LINE(GPIOA, 1)
+    #define F6 PAL_LINE(GPIOA, 0)
+    #define F7 PAL_LINE(GPIOB, 8)
+    #define B1 PAL_LINE(GPIOB, 13)
+    #define B3 PAL_LINE(GPIOB, 14)
+    #define B2 PAL_LINE(GPIOB, 15)
+    #define B6 PAL_LINE(GPIOB, 9)
+
+    // LEDs
+    #define D5 PAL_LINE(GPIOC, 13)
+    #define B0 PAL_LINE(GPIOC, 14)
+  #else
     #define A0  PAL_LINE(GPIOA, 0)
     #define A1  PAL_LINE(GPIOA, 1)
     #define A2  PAL_LINE(GPIOA, 2)
@@ -221,6 +254,7 @@
     #define F13 PAL_LINE(GPIOF, 13)
     #define F14 PAL_LINE(GPIOF, 14)
     #define F15 PAL_LINE(GPIOF, 15)
+  #endif
 #endif
 
 /* USART configuration */

quantum/mcu_selection.mk

@@ -1,5 +1,5 @@
 
-ifneq ($(findstring STM32, $(MCU)),)
+ifneq ($(findstring STM32F303, $(MCU)),)
   ## chip/board settings
   # - the next two should match the directories in
   #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)

quantum/stm32/proton_c.mk

@@ -33,3 +33,6 @@ OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = yes