add kinT kinesis keyboard controller (kint41 variant) (#13333)

fixes https://github.com/kinx-project/kint/issues/5
2021-06-30 00:54:45 +02:00 · 2021-06-30 00:54:45 +02:00 · f533d9e033
commit f533d9e033
parent 76ed98c51d
8 changed files with 322 additions and 0 deletions
--- a/keyboards/kinesis/kint41/config.h
+++ b/keyboards/kinesis/kint41/config.h
@ -0,0 +1,105 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#undef VENDOR_ID
+#define VENDOR_ID 0x1209
+#undef PRODUCT_ID
+#define PRODUCT_ID 0x345C
+#undef DEVICE_VER
+#define DEVICE_VER 0x0001
+#undef MANUFACTURER
+#define MANUFACTURER "https://github.com/stapelberg"
+#undef PRODUCT
+#define PRODUCT "kinT (kint41)"
+
+/* key matrix size */
+#define MATRIX_ROWS 15
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS               \
+    {                                 \
+        LINE_PIN8,      /* ROW_EQL */ \
+            LINE_PIN9,  /* ROW_1 */   \
+            LINE_PIN10, /* ROW_2 */   \
+            LINE_PIN11, /* ROW_3 */   \
+            LINE_PIN7,  /* ROW_4 */   \
+            LINE_PIN16, /* ROW_5 */   \
+            LINE_PIN5,  /* ROW_6 */   \
+            LINE_PIN3,  /* ROW_7 */   \
+            LINE_PIN4,  /* ROW_8 */   \
+            LINE_PIN1,  /* ROW_9 */   \
+            LINE_PIN0,  /* ROW_0 */   \
+            LINE_PIN2,  /* ROW_MIN */ \
+            LINE_PIN17, /* ROW_ESC */ \
+            LINE_PIN23, /* ROW_F1 */  \
+            LINE_PIN21, /* ROW_F2 */  \
+    }
+
+#define MATRIX_COL_PINS             \
+    {                               \
+        LINE_PIN18,     /* COL_0 */ \
+            LINE_PIN14, /* COL_1 */ \
+            LINE_PIN15, /* COL_2 */ \
+            LINE_PIN20, /* COL_3 */ \
+            LINE_PIN22, /* COL_4 */ \
+            LINE_PIN19, /* COL_5 */ \
+            LINE_PIN6   /* COL_6 */ \
+    }
+
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Well-worn Cherry MX key switches can bounce for up to 20ms, despite the
+ * Cherry data sheet specifying 5ms. Because we use the sym_eager_pk debounce
+ * algorithm, this debounce latency only affects key releases (not key
+ * presses). */
+#undef DEBOUNCE
+#define DEBOUNCE 20
+
+#define IGNORE_MOD_TAP_INTERRUPT
+
+// Reduce input latency by lowering the USB polling interval
+// from its 10ms default to the 125μs minimum that USB 2.x (High Speed) allows:
+#define USB_POLLING_INTERVAL_MS 1
+
+/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
+ * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
+ * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
+ * No additional delay is necessary. */
+
+// in clock cycles
+#define GPIO_INPUT_PIN_DELAY 0
+
+#define LED_PIN_ON_STATE 0
+#define LED_NUM_LOCK_PIN LINE_PIN26
+#define LED_CAPS_LOCK_PIN LINE_PIN12
+#define LED_SCROLL_LOCK_PIN LINE_PIN25
+#define LED_COMPOSE_PIN LINE_PIN24