ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.

Browse source
This commit is contained in:
Dean Camera 2011-12-23 01:51:39 +00:00
parent 77f354609f
commit f201f6697b
278 changed files with 1000 additions and 910 deletions
Download patch file Download diff file Expand all files Collapse all files

2
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
View file

@ -151,7 +151,7 @@ void TINYNVM_DisableTPI(void)
/* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_STATUS_REG);
XPROGTarget_SendByte(0x00);
/* Read back the STATUS register, check to see if it took effect */
XPROGTarget_SendByte(TPI_CMD_SLDCS | PDI_RESET_REG);
} while (XPROGTarget_ReceiveByte() != 0x00);

4
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
View file

@ -149,7 +149,7 @@ void XMEGANVM_DisablePDI(void)
{
XMEGANVM_WaitWhileNVMBusBusy();
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run - must perform this until the
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run - must perform this until the
* change takes effect, as in some cases it takes multiple writes (silicon bug?).
*/
do
@ -157,7 +157,7 @@ void XMEGANVM_DisablePDI(void)
/* Clear reset register */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
/* Read back the reset register, check to see if it took effect */
XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_RESET_REG);
} while (XPROGTarget_ReceiveByte() != 0x00);

4
Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
View file

@ -143,7 +143,7 @@ static void XPROGProtocol_LeaveXPROGMode(void)
TINYNVM_DisableTPI();
#if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL)
/* If the XCK rescue clock option is enabled, we need to restart it once the
/* If the XCK rescue clock option is enabled, we need to restart it once the
* XPROG mode has been exited, since the XPROG protocol stops it after use. */
ISPTarget_ConfigureRescueClock();
#endif
@ -258,7 +258,7 @@ static void XPROGProtocol_WriteMemory(void)
Endpoint_ClearOUT();
Endpoint_WaitUntilReady();
}
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

4
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
View file

@ -120,7 +120,7 @@ void XPROGTarget_DisableTargetTPI(void)
/* Set all USART lines as inputs, tristate */
DDRD &= ~((1 << 5) | (1 << 3));
PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
/* Tristate target /RESET line */
AUX_LINE_DDR &= ~AUX_LINE_MASK;
AUX_LINE_PORT &= ~AUX_LINE_MASK;
@ -164,7 +164,7 @@ void XPROGTarget_SendIdle(void)
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
XPROGTarget_SetTxMode();
/* Need to do nothing for a full frame to send an IDLE */
for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
{