ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Spell check library source code files.

Browse source
This commit is contained in:
Dean Camera 2011-06-01 14:33:40 +00:00
parent 6d2a08f1b7
commit f01a05415c
46 changed files with 72 additions and 72 deletions
Download patch file Download diff file Expand all files Collapse all files

2
Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
View file

@ -230,7 +230,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
if (ProgrammingStatus != STATUS_CMD_OK)
break;
/* Must reset the polling address afterwards, so it is not erronously used for the next byte */
/* Must reset the polling address afterwards, so it is not erroneously used for the next byte */
PollAddress = 0;
}

4
Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
View file

@ -140,7 +140,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
PINB |= (1 << 1);
}
/** Initialises the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
/** Initializes the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
* communication with the attached target.
*/
void ISPTarget_EnableTargetISP(void)
@ -186,7 +186,7 @@ void ISPTarget_DisableTargetISP(void)
}
/** Configures the AVR to produce a .5MHz rescue clock out of the OCR1A pin of the AVR, so
* that it can be fed into the XTAL1 pin of an AVR whose fuses have been misconfigured for
* that it can be fed into the XTAL1 pin of an AVR whose fuses have been mis-configured for
* an external clock rather than a crystal. When used, the ISP speed must be 125KHz for this
* functionality to work correctly.
*/

2
Projects/AVRISP-MKII/Lib/V2Protocol.c
View file

@ -50,7 +50,7 @@ ISR(WDT_vect, ISR_BLOCK)
wdt_disable();
}
/** Initialises the hardware and software associated with the V2 protocol command handling. */
/** Initializes the hardware and software associated with the V2 protocol command handling. */
void V2Protocol_Init(void)
{
#if defined(ADC)

2
Projects/MediaController/MediaController.c
View file

@ -147,7 +147,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
uint8_t JoyStatus_LCL = Joystick_GetStatus();
uint8_t ButtonStatus_LCL = Buttons_GetStatus();
/* Update the Media Control report with the user button pressess */
/* Update the Media Control report with the user button presses */
MediaReport->Mute = ((ButtonStatus_LCL & BUTTONS_BUTTON1) ? true : false);
MediaReport->PlayPause = ((JoyStatus_LCL & JOY_PRESS) ? true : false);
MediaReport->VolumeUp = ((JoyStatus_LCL & JOY_UP) ? true : false);

2
Projects/Webserver/Lib/uIPManagement.c
View file

@ -164,7 +164,7 @@ void uIPManagement_UDPCallback(void)
/** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */
static void uIPManagement_ProcessIncomingPacket(void)
{
/* Determine which USB mode the system is currently initialised in */
/* Determine which USB mode the system is currently initialized in */
if (USB_CurrentMode == USB_MODE_Device)
{
/* If no packet received, exit processing routine */

2
Projects/XPLAINBridge/Lib/SoftUART.c
View file

@ -52,7 +52,7 @@ static uint8_t RX_BitsRemaining;
static uint8_t RX_Data;
/** Initialises the software UART, ready for data transmission and reception into the global ring buffers. */
/** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
void SoftUART_Init(void)
{
/* Set TX pin to output high, enable RX pull-up */