ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Seperated out OTG, Device and Host mode demos into seperate folders for clarity. Adjusted makefiles so that the path to the LUFA library can be set in one place.

Browse source
This commit is contained in:
Dean Camera 2009-03-20 06:34:41 +00:00
parent ecf7538430
commit ed031c1df2
209 changed files with 522 additions and 372 deletions
Download patch file Download diff file Expand all files Collapse all files

191
Demos/Host/StillImageHost/ConfigDescriptor.c Normal file
View file

@ -0,0 +1,191 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
* needed to communication with an attached USB device. Descriptors are special computer-readable structures
* which the host requests upon device enumeration, to determine the device's capabilities and functions.
*/
#include "ConfigDescriptor.h"
/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
* routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
* with compatible devices.
*
* This routine searches for a SI interface descriptor containing bulk IN and OUT data endpoints.
*
* \return An error code from the StillImageHost_GetConfigDescriptorDataCodes_t enum.
*/
uint8_t ProcessConfigurationDescriptor(void)
{
uint8_t* ConfigDescriptorData;
uint16_t ConfigDescriptorSize;
uint8_t FoundEndpoints = 0;
/* Get Configuration Descriptor size from the device */
if (USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful)
return ControlError;
/* Ensure that the Configuration Descriptor isn't too large */
if (ConfigDescriptorSize > MAX_CONFIG_DESCRIPTOR_SIZE)
return DescriptorTooLarge;
/* Allocate enough memory for the entire config descriptor */
ConfigDescriptorData = alloca(ConfigDescriptorSize);
/* Retrieve the entire configuration descriptor into the allocated buffer */
USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, ConfigDescriptorData);
/* Validate returned data - ensure first entry is a configuration header descriptor */
if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
return InvalidConfigDataReturned;
/* Get the Still Image interface from the configuration descriptor */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, NextStillImageInterface))
{
/* Descriptor not found, error out */
return NoInterfaceFound;
}
/* Get the IN and OUT data and event endpoints for the Still Image interface */
while (FoundEndpoints != ((1 << SIMAGE_EVENTS_PIPE) | (1 << SIMAGE_DATA_IN_PIPE) | (1 << SIMAGE_DATA_OUT_PIPE)))
{
/* Fetch the next endpoint from the current Still Image interface */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
NextSImageInterfaceDataEndpoint))
{
/* Descriptor not found, error out */
return NoEndpointFound;
}
USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
/* Check if the found endpoint is a interrupt or bulk type descriptor */
if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
{
/* If the endpoint is a IN type interrupt endpoint */
if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
{
/* Configure the events pipe */
Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize,
PIPE_BANK_DOUBLE);
Pipe_SetInfiniteINRequests();
Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS);
/* Set the flag indicating that the events pipe has been found */
FoundEndpoints |= (1 << SIMAGE_EVENTS_PIPE);
}
}
else
{
/* Check if the endpoint is a bulk IN or bulk OUT endpoint */
if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
{
/* Configure the data IN pipe */
Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize,
PIPE_BANK_DOUBLE);
Pipe_SetInfiniteINRequests();
/* Set the flag indicating that the data IN pipe has been found */
FoundEndpoints |= (1 << SIMAGE_DATA_IN_PIPE);
}
else
{
/* Configure the data OUT pipe */
Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
EndpointData->EndpointAddress, EndpointData->EndpointSize,
PIPE_BANK_DOUBLE);
/* Set the flag indicating that the data OUT pipe has been found */
FoundEndpoints |= (1 << SIMAGE_DATA_OUT_PIPE);
}
}
}
/* Valid data found, return success */
return SuccessfulConfigRead;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interface descriptor of the correct Still Image Class, Subclass and Protocol values.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
DESCRIPTOR_COMPARATOR(NextStillImageInterface)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
/* Check the descriptor class and protocol, break out if correct class/protocol interface found */
if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == SIMAGE_CLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == SIMAGE_SUBCLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == SIMAGE_PROTOCOL))
{
return Descriptor_Search_Found;
}
}
return Descriptor_Search_NotFound;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interrupt or Bulk Endpoint descriptor of the current SI interface, aborting the
* search if another interface descriptor is found before the next endpoint.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
DESCRIPTOR_COMPARATOR(NextSImageInterfaceDataEndpoint)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)
{
uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,
USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);
if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT))
return Descriptor_Search_Found;
}
else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
return Descriptor_Search_Fail;
}
return Descriptor_Search_NotFound;
}

77
Demos/Host/StillImageHost/ConfigDescriptor.h Normal file
View file

@ -0,0 +1,77 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for ConfigDescriptor.c.
*/
#ifndef _CONFIGDESCRIPTOR_H_
#define _CONFIGDESCRIPTOR_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include <LUFA/Drivers/USB/Class/ConfigDescriptor.h> // Configuration Descriptor Parser
#include "StillImageHost.h"
/* Macros: */
/** Interface Class value for the Still Image Device class */
#define SIMAGE_CLASS 0x06
/** Interface Class value for the Still Image Device subclass */
#define SIMAGE_SUBCLASS 0x01
/** Interface Class value for the Still Image Device protocol */
#define SIMAGE_PROTOCOL 0x01
/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
#define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
enum MassStorageHost_GetConfigDescriptorDataCodes_t
{
SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */
ControlError = 1, /**< A control request to the device failed to complete successfully */
DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
NoInterfaceFound = 4, /**< A compatible SI interface was not found in the device's Configuration Descriptor */
NoEndpointFound = 5, /**< The correct SI endpoint descriptors were not found in the device's SI interface */
};
/* Configuration Descriptor Comparison Functions: */
DESCRIPTOR_COMPARATOR(NextStillImageInterface);
DESCRIPTOR_COMPARATOR(NextSImageInterfaceDataEndpoint);
/* Function Prototypes: */
uint8_t ProcessConfigurationDescriptor(void);
#endif

1485
Demos/Host/StillImageHost/Doxygen.conf Normal file
View file

File diff suppressed because it is too large Load diff

51
Demos/Host/StillImageHost/PIMACodes.h Normal file
View file

@ -0,0 +1,51 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header containing macros for possible PIMA commands. Refer to the PIMA standard
* documentation for more information on each PIMA command.
*/
#ifndef _PIMA_CODES_H_
/* Macros: */
#define PIMA_OPERATION_GETDEVICEINFO 0x1001
#define PIMA_OPERATION_OPENSESSION 0x1002
#define PIMA_OPERATION_CLOSESESSION 0x1003
#define PIMA_RESPONSE_OK 0x2001
#define PIMA_RESPONSE_GENERALERROR 0x2002
#define PIMA_RESPONSE_SESSIONNOTOPEN 0x2003
#define PIMA_RESPONSE_INVALIDTRANSACTIONID 0x2004
#define PIMA_RESPONSE_OPERATIONNOTSUPPORTED 0x2005
#define PIMA_RESPONSE_PARAMETERNOTSUPPORTED 0x2006
#endif

273
Demos/Host/StillImageHost/StillImageCommands.c Normal file
View file

@ -0,0 +1,273 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Still Image Device commands, to issue PIMA commands to the device for
* reading device status, capacity, and other characteristics as well as
* reading and writing of stored image data.
*/
#include "StillImageCommands.h"
/* Globals: */
/** PIMA block container for the block to send to the device */
PIMA_Container_t PIMA_SendBlock;
/** PIMA block container for the last received block from the device */
PIMA_Container_t PIMA_ReceivedBlock;
/** PIMA block container for the last event block received from the device */
PIMA_Container_t PIMA_EventBlock;
/** Function to send the PIMA command container to the attached still image device. */
void SImage_SendBlockHeader(void)
{
/* Unfreeze the data OUT pipe ready for data transmission */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the PIMA block to the data OUT pipe */
Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0));
/* If the block type is a command, send its parameters (if any) */
if (PIMA_SendBlock.Type == CType_CommandBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_SendBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if any parameters in the command block */
if (ParamBytes)
{
/* Write the PIMA parameters to the data OUT pipe */
Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes);
}
/* Send the PIMA command block to the attached device */
Pipe_ClearCurrentBank();
}
/* Freeze pipe after use */
Pipe_Freeze();
}
/** Function to receive a PIMA event container from the attached still image device. */
void SImage_RecieveEventHeader(void)
{
/* Unfreeze the events pipe */
Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
Pipe_Unfreeze();
/* Read in the event data into the global structure */
Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock));
/* Clear the pipe after read complete to prepare for next event */
Pipe_ClearCurrentBank();
/* Freeze the event pipe again after use */
Pipe_Freeze();
}
/** Function to receive a PIMA response container from the attached still image device. */
uint8_t SImage_RecieveBlockHeader(void)
{
uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Wait until data received on the IN pipe */
while (!(Pipe_ReadWriteAllowed()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
{
/* Return error code */
return PIPE_RWSTREAM_ERROR_Timeout;
}
}
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the OUT pipe */
SImage_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);
/* Return error code and break out of the loop */
return PIPE_RWSTREAM_ERROR_PipeStalled;
}
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
/* Check if pipe stalled (command failed by device) */
if (Pipe_IsStalled())
{
/* Clear the stall condition on the IN pipe */
SImage_ClearPipeStall(SIMAGE_DATA_IN_PIPE);
/* Return error code */
return PIPE_RWSTREAM_ERROR_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
{
/* Return error code */
return PIPE_RWSTREAM_ERROR_DeviceDisconnected;
}
};
/* Freeze OUT pipe after use */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Freeze();
/* Select the IN data pipe for data reception */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
/* Load in the response from the attached device */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0));
/* Check if the returned block type is a response block */
if (PIMA_ReceivedBlock.Type == CType_ResponseBlock)
{
/* Determine the size of the parameters in the block via the data length attribute */
uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Check if the device has returned any parameters */
if (ParamBytes)
{
/* Read the PIMA parameters from the data IN pipe */
Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes);
}
/* Clear pipe bank after use */
Pipe_ClearCurrentBank();
}
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_ERROR_NoError;
}
/** Function to send the given data to the device, after a command block has been issued.
*
* \param Buffer Source data buffer to send to the device
* \param Bytes Number of bytes to send
*/
void SImage_SendData(void* Buffer, uint16_t Bytes)
{
/* Unfreeze the data OUT pipe */
Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
Pipe_Unfreeze();
/* Write the data contents to the pipe */
Pipe_Write_Stream_LE(Buffer, Bytes);
/* Freeze the pipe again after use */
Pipe_Freeze();
}
/** Function to receive the given data to the device, after a response block has been received.
*
* \param Buffer Destination data buffer to put read bytes from the device
* \param Bytes Number of bytes to receive
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes)
{
uint8_t ErrorCode;
/* Unfreeze the data IN pipe */
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Read in the data into the buffer */
ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes);
/* Freeze the pipe again after use */
Pipe_Freeze();
return ErrorCode;
}
/** Function to test if a PIMA event block is waiting to be read in from the attached device.
*
* \return True if an event is waiting to be read in from the device, false otherwise
*/
bool SImage_IsEventReceived(void)
{
bool IsEventReceived = false;
/* Unfreeze the Event pipe */
Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
Pipe_Unfreeze();
/* If the pipe contains data, an event has been received */
if (Pipe_BytesInPipe())
IsEventReceived = true;
/* Freeze the pipe after use */
Pipe_Freeze();
return IsEventReceived;
}
/** Clears the stall condition in the attached device on the nominated endpoint number.
*
* \param EndpointNum Endpoint number in the attached device whose stall condition is to be cleared
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum
*/
uint8_t SImage_ClearPipeStall(const uint8_t PipeEndpointNum)
{
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
bRequest: REQ_ClearFeature,
wValue: FEATURE_ENDPOINT_HALT,
wIndex: PipeEndpointNum,
wLength: 0,
};
return USB_Host_SendControlRequest(NULL);
}

102
Demos/Host/StillImageHost/StillImageCommands.h Normal file
View file

@ -0,0 +1,102 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for StillImageCommands.c.
*/
#ifndef _STILL_IMAGE_COMMANDS_H_
#define _STILL_IMAGE_COMMANDS_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include "PIMACodes.h"
/* Macros: */
/** Pipe number of the Still Image data IN pipe */
#define SIMAGE_DATA_IN_PIPE 0x01
/** Pipe number of the Still Image data OUT pipe */
#define SIMAGE_DATA_OUT_PIPE 0x02
/** Pipe number of the Still Image events pipe */
#define SIMAGE_EVENTS_PIPE 0x03
/** Timeout period between the issuing of a command to a device, and the reception of the first packet */
#define COMMAND_DATA_TIMEOUT_MS 5000
/** Used in the DataLength field of a PIMA container, to give the total container size in bytes.
*
* \param params Number of parameters which are to be sent in the Param field of the container
*/
#define PIMA_COMMAND_SIZE(params) ((sizeof(PIMA_SendBlock) - sizeof(PIMA_SendBlock.Params)) + \
(params * sizeof(PIMA_SendBlock.Params[0])))
/* Type Defines: */
/** Type define for a PIMA container, use to send commands and receieve responses to and from an
* attached Still Image device.
*/
typedef struct
{
uint32_t DataLength; /**< Length of the container and data, in bytes */
uint16_t Type; /**< Container type, a value from the PIMA_Container_Types_t enum */
uint16_t Code; /**< Command, event or response code of the container */
uint32_t TransactionID; /**< Unique container ID to link blocks together */
uint32_t Params[4]; /**< Block parameters to be issued along with the block code */
} PIMA_Container_t;
/* Enums: */
/** Enum for the possible PIMA contains types. */
enum PIMA_Container_Types_t
{
CType_Undefined = 0, /**< Undefined container type */
CType_CommandBlock = 1, /**< Command Block container type */
CType_DataBlock = 2, /**< Data Block container type */
CType_ResponseBlock = 3, /**< Response container type */
CType_EventBlock = 4, /**< Event Block container type */
};
/* External Variables: */
extern PIMA_Container_t PIMA_SendBlock;
extern PIMA_Container_t PIMA_ReceivedBlock;
extern PIMA_Container_t PIMA_EventBlock;
/* Function Prototypes: */
void SImage_SendBlockHeader(void);
uint8_t SImage_RecieveBlockHeader(void);
void SImage_RecieveEventHeader(void);
void SImage_SendData(void* Buffer, uint16_t Bytes);
uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes);
bool SImage_IsEventReceived(void);
uint8_t SImage_ClearPipeStall(const uint8_t PipeEndpointNum);
#endif

1
Demos/Host/StillImageHost/StillImageHost.aps Normal file
View file

@ -0,0 +1 @@
<AVRStudio><MANAGEMENT><ProjectName>StillImageHost</ProjectName><Created>30-Sep-2008 14:17:41</Created><LastEdit>30-Sep-2008 14:17:55</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>30-Sep-2008 14:17:41</Created><Version>4</Version><Build>4, 14, 0, 589</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile></ObjectFile><EntryFile></EntryFile><SaveFolder>C:\Users\Dean\Documents\Electronics\Projects\WORK\MyUSBWORK\Demos\StillImageHost\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET></CURRENT_TARGET><CURRENT_PART></CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM>Auto</COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>ConfigDescriptor.c</SOURCEFILE><SOURCEFILE>StillImageCommands.c</SOURCEFILE><SOURCEFILE>StillImageHost.c</SOURCEFILE><HEADERFILE>ConfigDescriptor.h</HEADERFILE><HEADERFILE>PIMACodes.h</HEADERFILE><HEADERFILE>StillImageCommands.h</HEADERFILE><HEADERFILE>StillImageHost.h</HEADERFILE><OTHERFILE>makefile</OTHERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>atmega128</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>StillImageHost.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20080512\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20080512\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>

436
Demos/Host/StillImageHost/StillImageHost.c Normal file
View file

@ -0,0 +1,436 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the StillImageHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "StillImageHost.h"
/* Project Tags, for reading out using the ButtLoad project */
BUTTLOADTAG(ProjName, "LUFA SIMG Host App");
BUTTLOADTAG(BuildTime, __TIME__);
BUTTLOADTAG(BuildDate, __DATE__);
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_SImage_Host , TaskStatus: TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable Clock Division */
CLKPR = (1 << CLKPCE);
CLKPR = 0;
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
/* Initialize Scheduler so that it can be used */
Scheduler_Init();
/* Initialize USB Subsystem */
USB_Init();
/* Startup message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Still Image Host Demo running.\r\n" ESC_INVERSE_OFF));
/* Scheduling - routine never returns, so put this last in the main function */
Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
EVENT_HANDLER(USB_DeviceAttached)
{
puts_P(PSTR("Device Attached.\r\n"));
UpdateStatus(Status_USBEnumerating);
/* Start USB management task to enumerate the device */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
EVENT_HANDLER(USB_DeviceUnattached)
{
/* Stop USB management and Still Image tasks */
Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
Scheduler_SetTaskMode(USB_SImage_Host, TASK_STOP);
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
UpdateStatus(Status_USBNotReady);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
EVENT_HANDLER(USB_DeviceEnumerationComplete)
{
/* Once device is fully enumerated, start the Still Image Host task */
Scheduler_SetTaskMode(USB_SImage_Host, TASK_RUN);
/* Indicate device enumeration complete */
UpdateStatus(Status_USBReady);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
EVENT_HANDLER(USB_HostError)
{
USB_ShutDown();
puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
UpdateStatus(Status_HardwareError);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
{
puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
UpdateStatus(Status_EnumerationError);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to print device information
* through the serial port.
*/
TASK(USB_SImage_Host)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
};
/* Send the request, display error and wait for device detatch if request fails */
if (USB_Host_SendControlRequest(NULL) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control error.\r\n"));
/* Indicate error via status LEDs */
UpdateStatus(Status_EnumerationError);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR("Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR("Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
UpdateStatus(Status_EnumerationError);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
puts_P(PSTR("Still Image Device Enumerated.\r\n"));
USB_HostState = HOST_STATE_Ready;
break;
case HOST_STATE_Ready:
/* Indicate device busy via the status LEDs */
UpdateStatus(Status_Busy);
puts_P(PSTR("Retrieving Device Info...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
{
DataLength: PIMA_COMMAND_SIZE(0),
Type: CType_CommandBlock,
Code: PIMA_OPERATION_GETDEVICEINFO,
TransactionID: 0x00000000,
Params: {},
};
/* Send the GETDEVICEINFO block */
SImage_SendBlockHeader();
/* Recieve the response data block */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Calculate the size of the returned device info data structure */
uint16_t DeviceInfoSize = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
/* Create a buffer large enough to hold the entire device info */
uint8_t DeviceInfo[DeviceInfoSize];
/* Read in the data block data (containing device info) */
SImage_ReadData(DeviceInfo, DeviceInfoSize);
/* Once all the data has been read, the pipe must be cleared before the response can be sent */
Pipe_ClearCurrentBank();
/* Create a pointer for walking through the info dataset */
uint8_t* DeviceInfoPos = DeviceInfo;
/* Skip over the data before the unicode device information strings */
DeviceInfoPos += 8; // Skip to VendorExtensionDesc String
DeviceInfoPos += ((*DeviceInfoPos << 1) + 1); // Skip over VendorExtensionDesc String
DeviceInfoPos += 2; // Skip over FunctionalMode
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over OperationCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over EventCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over DevicePropCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over ObjectFormatCode Array
DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over ObjectFormatCode Array
/* Extract and convert the Manufacturer Unicode string to ASCII and print it through the USART */
char Manufacturer[*DeviceInfoPos];
UnicodeToASCII(DeviceInfoPos, Manufacturer);
printf_P(PSTR(" Manufacturer: %s\r\n"), Manufacturer);
DeviceInfoPos += ((*DeviceInfoPos << 1) + 1); // Skip over Manufacturer String
/* Extract and convert the Model Unicode string to ASCII and print it through the USART */
char Model[*DeviceInfoPos];
UnicodeToASCII(DeviceInfoPos, Model);
printf_P(PSTR(" Model: %s\r\n"), Model);
DeviceInfoPos += ((*DeviceInfoPos << 1) + 1); // Skip over Model String
/* Extract and convert the Device Version Unicode string to ASCII and print it through the USART */
char DeviceVersion[*DeviceInfoPos];
UnicodeToASCII(DeviceInfoPos, DeviceVersion);
printf_P(PSTR(" Device Version: %s\r\n"), DeviceVersion);
/* Recieve the final response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Verify that the command completed successfully */
if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
{
ShowCommandError(PIMA_ReceivedBlock.Code, true);
break;
}
puts_P(PSTR("Opening Session...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
{
DataLength: PIMA_COMMAND_SIZE(1),
Type: CType_CommandBlock,
Code: PIMA_OPERATION_OPENSESSION,
TransactionID: 0x00000000,
Params: {0x00000001},
};
/* Send the OPENSESSION block, open a session with an ID of 0x0001 */
SImage_SendBlockHeader();
/* Recieve the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Verify that the command completed successfully */
if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
{
ShowCommandError(PIMA_ReceivedBlock.Code, true);
break;
}
puts_P(PSTR("Closing Session...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
{
DataLength: PIMA_COMMAND_SIZE(1),
Type: CType_CommandBlock,
Code: PIMA_OPERATION_CLOSESESSION,
TransactionID: 0x00000001,
Params: {0x00000001},
};
/* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
SImage_SendBlockHeader();
/* Recieve the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
break;
}
/* Verify that the command completed successfully */
if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
{
ShowCommandError(PIMA_ReceivedBlock.Code, true);
break;
}
puts_P(PSTR("Done.\r\n"));
/* Indicate device no longer busy */
UpdateStatus(Status_USBReady);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
}
/** Function to convert a given Unicode encoded string to ASCII. This function will only work correctly on Unicode
* strings which contain ASCII printable characters only.
*
* \param UnicodeString Pointer to a Unicode encoded input string
* \param Buffer Pointer to a buffer where the converted ASCII string should be stored
*/
void UnicodeToASCII(uint8_t* UnicodeString, char* Buffer)
{
/* Get the number of characters in the string, skip to the start of the string data */
uint8_t CharactersRemaining = *(UnicodeString++);
/* Loop through the entire unicode string */
while (CharactersRemaining--)
{
/* Load in the next unicode character (only the lower byte, only Unicode coded ASCII supported) */
*(Buffer++) = *UnicodeString;
/* Jump to the next unicode character */
UnicodeString += 2;
}
/* Null terminate the string */
*Buffer = 0;
}
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
* log to a serial port, or anything else that is suitable for status updates.
*
* \param CurrentStatus Current status of the system, from the StillImageHost_StatusCodes_t enum
*/
void UpdateStatus(uint8_t CurrentStatus)
{
uint8_t LEDMask = LEDS_NO_LEDS;
/* Set the LED mask to the appropriate LED mask based on the given status code */
switch (CurrentStatus)
{
case Status_USBNotReady:
LEDMask = (LEDS_LED1);
break;
case Status_USBEnumerating:
LEDMask = (LEDS_LED1 | LEDS_LED2);
break;
case Status_USBReady:
LEDMask = (LEDS_LED2);
break;
case Status_EnumerationError:
case Status_HardwareError:
case Status_PIMACommandError:
LEDMask = (LEDS_LED1 | LEDS_LED3);
break;
case Status_Busy:
LEDMask = (LEDS_LED1 | LEDS_LED3 | LEDS_LED4);
break;
}
/* Set the board LEDs to the new LED mask */
LEDs_SetAllLEDs(LEDMask);
}
/** Displays a PIMA command error via the device's serial port.
*
* \param ErrorCode Error code of the function which failed to complete successfully
* \param ResponseErrorCode Indicates if the error is due to a command failed indication from the device, or a communication failure
*/
void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError)
{
char* FailureType = ((ResponseCodeError) ? PSTR("Response Code != OK") : PSTR("Transaction Fail"));
printf_P(PSTR(ESC_BG_RED "Command Error (%S).\r\n"), FailureType);
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
UpdateStatus(Status_PIMACommandError);
/* Wait until USB device disconnected */
while (USB_IsConnected);
}

84
Demos/Host/StillImageHost/StillImageHost.h Normal file
View file

@ -0,0 +1,84 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for StillImageHost.c.
*/
#ifndef _STILL_IMAGE_HOST_H_
#define _STILL_IMAGE_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <stdio.h>
#include "ConfigDescriptor.h"
#include "PIMACodes.h"
#include "StillImageCommands.h"
#include <LUFA/Common/ButtLoadTag.h> // PROGMEM tags readable by the ButtLoad project
#include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include <LUFA/Drivers/AT90USBXXX/Serial_Stream.h> // Serial stream driver
#include <LUFA/Drivers/Board/LEDs.h> // LED driver
#include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
/* Enums: */
/** Enum for the possible status codes for passing to the UpdateStatus() function. */
enum StillImageHost_StatusCodes_t
{
Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
Status_USBEnumerating = 1, /**< USB interface is enumerating */
Status_USBReady = 2, /**< USB interface is connected and ready */
Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
Status_Busy = 5, /**< Busy reading or writing to the attached Still Image device */
Status_PIMACommandError = 6, /**< Error while sending or receiving a PIM command to the attached device */
};
/* Task Definitions: */
TASK(USB_SImage_Host);
/* Event Handlers: */
HANDLES_EVENT(USB_DeviceAttached);
HANDLES_EVENT(USB_DeviceUnattached);
HANDLES_EVENT(USB_DeviceEnumerationComplete);
HANDLES_EVENT(USB_HostError);
HANDLES_EVENT(USB_DeviceEnumerationFailed);
/* Function Prototypes: */
void UnicodeToASCII(uint8_t* restrict UnicodeString, char* restrict Buffer);
void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError);
void UpdateStatus(uint8_t CurrentStatus);
#endif

58
Demos/Host/StillImageHost/StillImageHost.txt Normal file
View file

@ -0,0 +1,58 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Still Image Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Still Image Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Still Image Class Specification</td>
* <td>PIMA 15740 Specification</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Still Image host demonstration application. This gives a simple reference
* application for implementing a Still Image host, for USB devices such as
* digital cameras.
*
* This demo will enumerate an attached USB Still Image device, print out its
* information structure, open a session with the device and finally close the
* session.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/

732
Demos/Host/StillImageHost/makefile Normal file
View file

@ -0,0 +1,732 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = 8000000
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = StillImageHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
StillImageCommands.c \
$(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/AT90USBXXX/Serial_Stream.c \
$(LUFA_PATH)/LUFA/Drivers/AT90USBXXX/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/ConfigDescriptor.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS -DUSB_HOST_ONLY
CDEFS += -DUSE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -finline-limit=20
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
@$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
checklibmode:
@echo
@echo ----------- Library Mode -----------
@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
| grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
checkboard:
@echo
@echo ---------- Selected Board ----------
@echo Selected board model is $(BOARD).
@echo ------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkhooks checklibmode checkboard \
begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff clean \
clean_list clean_binary program debug gdb-config \
doxygen dfu flip flip-ee dfu-ee