[Keyboard] move standaside into edi/ (#15798)

This commit is contained in:
peepeetee 2022-01-11 08:35:23 +08:00 committed by GitHub
parent f10285d800
commit ceea8ab5fe
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
7 changed files with 2 additions and 2 deletions

View file

@ -0,0 +1,104 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xF7E0
#define PRODUCT_ID 0x0412
#define DEVICE_VER 0x0003
#define MANUFACTURER Fate Everywhere
#define PRODUCT Stand Aside
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 }
#define UNUSED_PINS {}
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN C7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Enable RGB Underlighting
*/
#define RGB_DI_PIN C7
#define RGBLED_NUM 12
#define RGBLIGHT_ANIMATIONS
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

View file

@ -0,0 +1,78 @@
{
"keyboard_name": "Stand Aside",
"url": "",
"maintainer": "fateeverywhere",
"layouts": {
"LAYOUT_ortho_4x16": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0},
{"x":12, "y":0},
{"x":13, "y":0},
{"x":14, "y":0},
{"x":15, "y":0},
{"x":0, "y":1},
{"x":1, "y":1},
{"x":2, "y":1},
{"x":3, "y":1},
{"x":4, "y":1},
{"x":5, "y":1},
{"x":6, "y":1},
{"x":7, "y":1},
{"x":8, "y":1},
{"x":9, "y":1},
{"x":10, "y":1},
{"x":11, "y":1},
{"x":12, "y":1},
{"x":13, "y":1},
{"x":14, "y":1},
{"x":15, "y":1},
{"x":0, "y":2},
{"x":1, "y":2},
{"x":2, "y":2},
{"x":3, "y":2},
{"x":4, "y":2},
{"x":5, "y":2},
{"x":6, "y":2},
{"x":7, "y":2},
{"x":8, "y":2},
{"x":9, "y":2},
{"x":10, "y":2},
{"x":11, "y":2},
{"x":12, "y":2},
{"x":13, "y":2},
{"x":14, "y":2},
{"x":15, "y":2},
{"x":0, "y":3},
{"x":1, "y":3},
{"x":2, "y":3},
{"x":3, "y":3},
{"x":4, "y":3},
{"x":5, "y":3},
{"x":6, "y":3},
{"x":7, "y":3},
{"x":8, "y":3},
{"x":9, "y":3},
{"x":10, "y":3},
{"x":11, "y":3},
{"x":12, "y":3},
{"x":13, "y":3},
{"x":14, "y":3},
{"x":15, "y":3}
]
}
}
}

View file

@ -0,0 +1,77 @@
#include QMK_KEYBOARD_H
#define _MAIN 0
#define _RAISE 1
#define _LOWER 2
// Readability keycodes
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* MAIN
* .-----------------------------------------------------------------------------------------------------------------------------------------------.
* | TAB | Q | W | E | R | T | Y | U | I | O | P | Backsp | Delete | 7 | 8 | 9 |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | ESC | A | S | D | F | G | H | J | K | L | ; | ' | PgUp | 4 | 5 | 6 |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | SHIFT | Z | X | C | V | B | N | M | , | . | / | ENTER | PgDn | 1 | 2 | 3 |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | LCTRL | PAUS | GUI | ALT | Lower | Space | Space | Raise | Left | Down | Up | Right | Shift | 0 | . | ENTER |
* '-----------------------------------------------------------------------------------------------------------------------------------------------'
*/
[_MAIN] = LAYOUT_ortho_4x16(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_DEL, KC_KP_7, KC_KP_8, KC_KP_9,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_PGUP, KC_KP_4, KC_KP_5, KC_KP_6,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_PGDN, KC_KP_1, KC_KP_2, KC_KP_3,
KC_LCTL, KC_PAUS, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RSFT, KC_KP_0, KC_KP_DOT, KC_PENT
),
/* RAISE
* .-----------------------------------------------------------------------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | Insert | | | |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | | | | | | | | - | = | [ | ] | \ | Home | | | |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | | | | | | | | | | | | PScr | End | | | |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | | | | | | | | Next | Vol- | Vol+ | Play | NumLok | | | |
* '-----------------------------------------------------------------------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT_ortho_4x16(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_INS, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_END, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_NLCK, _______, _______, _______
),
/* LOWER
* .-----------------------------------------------------------------------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | RGBPWR | Mode | Reset |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | HUE+ | SAT+ | VAL+ |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | | HUE- | SAT- | VAL- |
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
* | | | | | | | | | | | Mute | | Plain | Rainbo | Larsen |
* '-----------------------------------------------------------------------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT_ortho_4x16(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, RGB_TOG, RGB_MOD, RESET,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, RGB_HUI, RGB_SAI, RGB_VAI,
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, RGB_M_P, RGB_M_R, RGB_M_K
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}

View file

@ -0,0 +1,15 @@
# Stand Aside
![Stand Aside](https://i.imgur.com/X6Katar.png)
A compact 60% keyboard designed by Fate Everywhere. Born out of the desire for a Planck with a numpad for technical work. Available for sale (kit and completed) once the store comes up.
Keyboard Maintainer: [Fate Everywhere](https://github.com/fateeverywhere)
Hardware Supported: Mark 3 Stand Aside.
Hardware Availability: Seven Store (https://store.7storm.org).
Make example for this keyboard (after setting up your build environment):
make edi/standaside:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1,18 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no # Audio output
RGBLIGHT_ENABLE = yes # Enable RGB underlighting support

View file

@ -0,0 +1 @@
#include "standaside.h"

View file

@ -0,0 +1,23 @@
#pragma once
#include "quantum.h"
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define LAYOUT_ortho_4x16( \
k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \
k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, \
k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, \
k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77 \
) { \
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
{ k10, k11, k12, k13, k14, k15, k16, k17 }, \
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
{ k30, k31, k32, k33, k34, k35, k36, k37 }, \
{ k40, k41, k42, k43, k44, k45, k46, k47 }, \
{ k50, k51, k52, k53, k54, k55, k56, k57 }, \
{ k60, k61, k62, k63, k64, k65, k66, k67 }, \
{ k70, k71, k72, k73, k74, k75, k76, k77 } \
}