Adding notes about ARM processors
This commit is contained in:
		
							parent
							
								
									1054d5554a
								
							
						
					
					
						commit
						c876bb8748
					
				
					 1 changed files with 14 additions and 2 deletions
				
			
		| 
						 | 
				
			
			@ -1,4 +1,7 @@
 | 
			
		|||
This runs on:
 | 
			
		||||
# Atmel AVR
 | 
			
		||||
 | 
			
		||||
QMK should run on any Atmel AVR processor with enough Flash. It has been tested on the following:
 | 
			
		||||
 | 
			
		||||
* ATmega32U4 ([PJRC Teensy 2.0](http://www.pjrc.com/teensy/))
 | 
			
		||||
* AT90USB1286 ([PJRC Teensy++ 2.0](http://www.pjrc.com/teensy/))
 | 
			
		||||
* AT90USB1287 ([Atmel USBKEY](http://www.atmel.com/tools/AT90USBKEY.aspx))
 | 
			
		||||
| 
						 | 
				
			
			@ -10,4 +13,13 @@ This runs on:
 | 
			
		|||
 | 
			
		||||
NOTE: To enable full features of firmware you'll need 32KB flash size.
 | 
			
		||||
 | 
			
		||||
Please add any tested microcontrollers to this list.
 | 
			
		||||
Please add any tested microcontrollers to this list.
 | 
			
		||||
 | 
			
		||||
* ARM
 | 
			
		||||
 | 
			
		||||
You can also use any ARM processor that ChibiOS supports. The following processors have been tested:
 | 
			
		||||
 | 
			
		||||
* [Kinetis MKL26Z64](http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/l-series-ultra-low-power-m0-plus/kinetis-kl2x-48-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x)
 | 
			
		||||
* [Kinetis MK20DX128](http://www.nxp.com/assets/documents/data/en/data-sheets/K20P64M50SF0.pdf)
 | 
			
		||||
* [Kinetis MK20DX128](http://www.nxp.com/assets/documents/data/en/data-sheets/K20P64M50SF0.pdf)
 | 
			
		||||
* [Kinetis MK20DX256](http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/k-series-performance-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72)
 | 
			
		||||
		Loading…
	
	Add table
		Add a link
		
	
		Reference in a new issue