[Keyboard] Added support for ErgoDox with STM32 Microcontroller (#5398)
* Began Work On STM32 Ergodox Changes to be committed: new file: keyboards/ergodox_stm32/config.h new file: keyboards/ergodox_stm32/rules.mk * test * Now it compile. Not linking thou * Screw this Linker. It links now! * Blinkly Keyboard * bootloader test code * Working on matrix / i2c stuff * Progress (LED Blink) * Progress on MCP_23017 Status Flag * [WIP] * update * Works! Remeber to change back the bootloader address when the new bootloadrer is ready. * Time to go debug the i2c * Finally, it now works with PCB Rev 1.0.2 * updated for rev.2 pcb * minor compilation fix * Why when debugger is enabled then everything works. * Remeber to call init functions. * Update arm i2c driver to support STM32F103 series device. * fix include once header. Replaced with #pragma once. * complication test
This commit is contained in:
Yaotian Feng
Drashna Jaelre
parent
eac4ce972d
commit
c61d7d7cb0
15 changed files with 1983 additions and 3 deletions
51
keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c
Normal file
51
keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c
Normal file
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
const PALConfig pal_default_config =
|
||||
{
|
||||
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
|
||||
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
|
||||
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
|
||||
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
|
||||
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Early initialization code.
|
||||
* This initialization must be performed just after stack setup and before
|
||||
* any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
/*
|
||||
* Board-specific initialization code.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
|
||||
|
||||
}
|
||||
142
keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h
Normal file
142
keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h
Normal file
|
|
@ -0,0 +1,142 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_JM60
|
||||
#define BOARD_NAME "ErgoDox STM32 Keyboard"
|
||||
|
||||
/*
|
||||
* Board frequencies.
|
||||
*/
|
||||
#define STM32_LSECLK 0
|
||||
#define STM32_HSECLK 8000000
|
||||
|
||||
/*
|
||||
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
||||
*
|
||||
* Only xB (128KB Flash) is defined, but it's identical to the
|
||||
* x8 version (64KB Flash) except for the Flash region size in the
|
||||
* linker script. For x8 parts use xB here and change to the x8 linker
|
||||
* script in the project Makefile.
|
||||
*/
|
||||
#define STM32F103xB
|
||||
|
||||
/*
|
||||
* IO pins assignments
|
||||
*
|
||||
* numbering is sorted by onboard/connectors, as from the schematics in
|
||||
* http://www.vcc-gnd.com/read.php?tid=369
|
||||
*/
|
||||
|
||||
/* on-board */
|
||||
#define GPIOA_USBDM 11 // pin 8
|
||||
#define GPIOA_USBDP 12 // pin 9
|
||||
|
||||
#define GPIOC_OSC32_IN 14
|
||||
#define GPIOC_OSC32_OUT 15
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
*
|
||||
* The digits have the following meaning:
|
||||
* 0 - Analog input.
|
||||
* 1 - Push Pull output 10MHz.
|
||||
* 2 - Push Pull output 2MHz.
|
||||
* 3 - Push Pull output 50MHz.
|
||||
* 4 - Digital input.
|
||||
* 5 - Open Drain output 10MHz.
|
||||
* 6 - Open Drain output 2MHz.
|
||||
* 7 - Open Drain output 50MHz.
|
||||
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
||||
* 9 - Alternate Push Pull output 10MHz.
|
||||
* A - Alternate Push Pull output 2MHz.
|
||||
* B - Alternate Push Pull output 50MHz.
|
||||
* C - Reserved.
|
||||
* D - Alternate Open Drain output 10MHz.
|
||||
* E - Alternate Open Drain output 2MHz.
|
||||
* F - Alternate Open Drain output 50MHz.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Port A setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */
|
||||
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
|
||||
#define VAL_GPIOAODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port B setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
||||
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
|
||||
#define VAL_GPIOBODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port C setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
|
||||
#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
|
||||
#define VAL_GPIOCODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port D setup.
|
||||
* Everything input with pull-up except:
|
||||
* PD0 - Normal input (XTAL).
|
||||
* PD1 - Normal input (XTAL).
|
||||
*/
|
||||
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
|
||||
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
|
||||
#define VAL_GPIODODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port E setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
|
||||
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
|
||||
#define VAL_GPIOEODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* USB bus activation macro, required by the USB driver.
|
||||
*/
|
||||
#define usb_lld_connect_bus(usbp) /* always connected */
|
||||
|
||||
/*
|
||||
* USB bus de-activation macro, required by the USB driver.
|
||||
*/
|
||||
#define usb_lld_disconnect_bus(usbp) /* always connected */
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* _BOARD_H_ */
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/ERGODOX_STM32_BOARD/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/ERGODOX_STM32_BOARD
|
||||
Loading…
Add table
Add a link
Reference in a new issue