ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included.

Browse source 
All LowLevel demos changed to use the constants and types defined in the USB class drivers.
This commit is contained in:
Dean Camera 2010-10-24 22:53:57 +00:00
parent 8f3bee7d86
commit b37d77eab3
208 changed files with 589 additions and 2910 deletions
Download patch file Download diff file Expand all files Collapse all files

41
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
View file

@ -44,10 +44,10 @@
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
.CharFormat = CDC_LINEENCODING_OneStopBit,
.ParityType = CDC_PARITY_None,
.DataBits = 8 };
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
@ -131,29 +131,29 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
/* Process CDC specific control requests */
switch (USB_ControlRequest.bRequest)
{
case REQ_GetLineEncoding:
case CDC_REQ_GetLineEncoding:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
Endpoint_ClearOUT();
}
break;
case REQ_SetLineEncoding:
case CDC_REQ_SetLineEncoding:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
Endpoint_ClearIN();
}
break;
case REQ_SetControlLineState:
case CDC_REQ_SetControlLineState:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
@ -180,29 +180,6 @@ void CDC_Task(void)
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
#if 0
/* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232
* handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:
*/
USB_Notification_Header_t Notification = (USB_Notification_Header_t)
{
.NotificationType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.Notification = NOTIF_SerialState,
.wValue = 0,
.wIndex = 0,
.wLength = sizeof(uint16_t),
};
uint16_t LineStateMask;
// Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host
Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM);
Endpoint_Write_Stream_LE(&Notification, sizeof(Notification));
Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask));
Endpoint_ClearIN();
#endif
/* Determine if a joystick action has occurred */
if (JoyStatus_LCL & JOY_UP)
ReportString = "Joystick Up\r\n";