ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add drivers for the EVK1101 - begin full port to the AVR32 UC3B line of AVRs.

Browse source
This commit is contained in:
Dean Camera 2010-02-22 11:44:34 +00:00
parent d2851b3351
commit aae20139b9
16 changed files with 509 additions and 18 deletions
Download patch file Download diff file Expand all files Collapse all files

184
LUFA/Drivers/Peripheral/AVRU4U6U7/SPI.h Normal file
View file

@ -0,0 +1,184 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Hardware SPI subsystem driver for the supported USB AVRs models.
*/
/** \ingroup Group_PeripheralDrivers
* @defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
* - None
*
* \section Module Description
* Driver for the hardware SPI port available on most AVR models. This module provides
* an easy to use driver for the setup of and transfer of data over the AVR's SPI port.
*
* @{
*/
#ifndef __SPI_H__
#define __SPI_H__
/* Includes: */
#include <stdbool.h>
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
#define SPI_USE_DOUBLESPEED (1 << SPE)
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 2. */
#define SPI_SPEED_FCPU_DIV_2 SPI_USE_DOUBLESPEED
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 4. */
#define SPI_SPEED_FCPU_DIV_4 0
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 8. */
#define SPI_SPEED_FCPU_DIV_8 (SPI_USE_DOUBLESPEED | (1 << SPR0))
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 16. */
#define SPI_SPEED_FCPU_DIV_16 (1 << SPR0)
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 32. */
#define SPI_SPEED_FCPU_DIV_32 (SPI_USE_DOUBLESPEED | (1 << SPR1))
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 64. */
#define SPI_SPEED_FCPU_DIV_64 (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0))
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */
#define SPI_SPEED_FCPU_DIV_128 ((1 << SPR1) | (1 << SPR0))
/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */
#define SPI_SCK_LEAD_RISING (0 << CPOL)
/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */
#define SPI_SCK_LEAD_FALLING (1 << CPOL)
/** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */
#define SPI_SAMPLE_LEADING (0 << CPHA)
/** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
#define SPI_SAMPLE_TRAILING (1 << CPHA)
/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
#define SPI_MODE_SLAVE (0 << MSTR)
/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
#define SPI_MODE_MASTER (1 << MSTR)
/* Inline Functions: */
/** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other
* SPI routines.
*
* \param[in] SPIOptions SPI Options, a mask consisting of one of each of the SPI_SPEED_*,
* SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks
*/
static inline void SPI_Init(const uint8_t SPIOptions)
{
DDRB |= ((1 << 1) | (1 << 2));
PORTB |= ((1 << 0) | (1 << 3));
SPCR = ((1 << SPE) | SPIOptions);
if (SPIOptions & SPI_USE_DOUBLESPEED)
SPSR |= (1 << SPI2X);
else
SPSR &= ~(1 << SPI2X);
}
/** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */
static inline void SPI_ShutDown(void)
{
DDRB &= ~((1 << 1) | (1 << 2));
PORTB &= ~((1 << 0) | (1 << 3));
SPCR = 0;
SPSR = 0;
}
/** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
*
* \param[in] Byte Byte to send through the SPI interface
*
* \return Response byte from the attached SPI device
*/
static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline uint8_t SPI_TransferByte(const uint8_t Byte)
{
SPDR = Byte;
while (!(SPSR & (1 << SPIF)));
return SPDR;
}
/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
* byte sent to from the attached SPI device is ignored.
*
* \param[in] Byte Byte to send through the SPI interface
*/
static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void SPI_SendByte(const uint8_t Byte)
{
SPDR = Byte;
while (!(SPSR & (1 << SPIF)));
}
/** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response
* byte from the attached SPI device is returned.
*
* \return The response byte from the attached SPI device
*/
static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
static inline uint8_t SPI_ReceiveByte(void)
{
SPDR = 0x00;
while (!(SPSR & (1 << SPIF)));
return SPDR;
}
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */

161
LUFA/Drivers/Peripheral/AVRU4U6U7/Serial.h Normal file
View file

@ -0,0 +1,161 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Driver for the USART subsystem on supported USB AVRs.
*/
/** \ingroup Group_PeripheralDrivers
* @defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
* - LUFA/Drivers/Peripheral/Serial.c
*
* \section Module Description
* Hardware serial USART driver. This module provides an easy to use driver for
* the setup of and transfer of data over the AVR's USART port.
*
* @{
*/
#ifndef __SERIAL_H__
#define __SERIAL_H__
/* Includes: */
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <stdbool.h>
#include "../../Common/Common.h"
#include "../Misc/TerminalCodes.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is
* not set.
*/
#define SERIAL_UBBRVAL(baud) ((((F_CPU / 16) + (baud / 2)) / (baud)) - 1)
/** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is
* set.
*/
#define SERIAL_2X_UBBRVAL(baud) ((((F_CPU / 8) + (baud / 2)) / (baud)) - 1)
/* Pseudo-Function Macros: */
#if defined(__DOXYGEN__)
/** Indicates whether a character has been received through the USART.
*
* \return Boolean true if a character has been received, false otherwise
*/
static inline bool Serial_IsCharReceived(void);
#else
#define Serial_IsCharReceived() ((UCSR1A & (1 << RXC1)) ? true : false)
#endif
/* Function Prototypes: */
/** Transmits a given string located in program space (FLASH) through the USART.
*
* \param[in] FlashStringPtr Pointer to a string located in program space
*/
void Serial_TxString_P(const char *FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1);
/** Transmits a given string located in SRAM memory through the USART.
*
* \param[in] StringPtr Pointer to a string located in SRAM space
*/
void Serial_TxString(const char *StringPtr) ATTR_NON_NULL_PTR_ARG(1);
/* Inline Functions: */
/** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to
* standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
*
* \param[in] BaudRate Serial baud rate, in bits per second
* \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate
*/
static inline void Serial_Init(const uint32_t BaudRate, const bool DoubleSpeed)
{
UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0);
UCSR1B = ((1 << TXEN1) | (1 << RXEN1));
UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10));
DDRD |= (1 << 3);
PORTD |= (1 << 2);
UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
}
/** Turns off the USART driver, disabling and returning used hardware to their default configuration. */
static inline void Serial_ShutDown(void)
{
UCSR1A = 0;
UCSR1B = 0;
UCSR1C = 0;
DDRD &= ~(1 << 3);
PORTD &= ~(1 << 2);
UBRR1 = 0;
}
/** Transmits a given byte through the USART.
*
* \param[in] DataByte Byte to transmit through the USART
*/
static inline void Serial_TxByte(const char DataByte)
{
while (!(UCSR1A & (1 << UDRE1)));
UDR1 = DataByte;
}
/** Receives a byte from the USART.
*
* \return Byte received from the USART
*/
static inline char Serial_RxByte(void)
{
while (!(UCSR1A & (1 << RXC1)));
return UDR1;
}
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */