ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.

Browse source
This commit is contained in:
Dean Camera 2010-12-26 14:55:26 +00:00
parent 2073b96d82
commit a8b66f318d
109 changed files with 357 additions and 318 deletions
Download patch file Download diff file Expand all files Collapse all files

18
Projects/AVRISP-MKII/AVRISP-MKII.txt
View file

@ -6,7 +6,7 @@
/** \mainpage AVRISP MKII Programmer Project
*
* \section SSec_Compat Project Compatibility:
* \section Sec_Compat Project Compatibility:
*
* The following list indicates what microcontrollers are compatible with this project.
*
@ -15,7 +15,7 @@
* - Series 4 USB AVRs (ATMEGAxxU4)
* - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - <i>8KB versions with reduced features only</i>
*
* \section SSec_Info USB Information:
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this project.
*
@ -42,7 +42,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section Sec_Description Project Description:
*
* Firmware for an AVRStudio compatible AVRISP-MKII clone programmer. This project will enable the USB AVR series of
* microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within AVRStudio. In its
@ -109,8 +109,8 @@
* fuses have been mis-set. To use the recovery clock, connect the OCR1A pin of the USB AVR to the target AVR's
* XTAL1 pin, and set the ISP programming speed to 125KHz (note: other ISP speeds will not work correctly).
*
* <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
* <b><sup>1</sup></b> <i>Optional, see \ref Sec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref Sec_Options section</i>
*
* \section Sec_PDI PDI Connections
* Connections to the device for PDI programming (when enabled):
@ -153,7 +153,7 @@
* </tr>
* </table>
*
* <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>1</sup></b> <i>Optional, see \ref Sec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>2</sup></b> <i>The AVR's Tx and Rx become the DATA line when connected together via a pair of 220 ohm resistors</i> \n
*
* \section Sec_TPI TPI Connections
@ -197,11 +197,11 @@
* </tr>
* </table>
*
* <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>1</sup></b> <i>Optional, see \ref Sec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>2</sup></b> <i>The AVR's Tx and Rx become the DATA line when connected together via a pair of 220 ohm resistors</i> \n
* <b><sup>3</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
* <b><sup>3</sup></b> <i>See AUX line related tokens in the \ref Sec_Options section</i>
*
* \section SSec_Options Project Options
* \section Sec_Options Project Options
*
* The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
*