ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Seperated out parts of the PrinterHost incomplete demo into a seperate Lib subdirectory.

Browse source 
Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.
This commit is contained in:
Dean Camera 2009-07-13 04:46:52 +00:00
parent 23f3c3deee
commit a54ed0085b
14 changed files with 213 additions and 95 deletions
Download patch file Download diff file Expand all files Collapse all files

25
LUFA/ManPages/ConfiguringApps.txt
View file

@ -24,7 +24,9 @@
* - <b>BOARD</b>, the target board hardware
* - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed
* - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling
* - <b>CDEFS</b>, the C preprocessor defines which configure the source code
* - <b>CDEFS</b>, the C preprocessor defines which configure options the source code
* - <b>LUFA_PATH</b>, the path to the LUFA library source code
* - <b>LUFA_OPTS</b>, the compile time LUFA options which configure the library features
*
* These values should be changed to reflect the build hardware.
*
@ -63,12 +65,23 @@
* library components will occur.
*
* \section Sec_CDEFS The CDEFS Parameter
* Many applications have features which can be controlled by the defining of specially named preprocessor tokens at the point of compilation - for example,
* an application might use a compile time token to turn on or off optional or mutually exclusive portions of code. Preprocessor tokens can be
* defined here by listing each one with the -D command line switch, and each token can optionally be defined to a specific value. When defined in the
* project makefile, these behave as if they were defined in every source file via a normal preprocessor define statement.
*
* Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large
* numbers of configuration options remain readable by splitting up groups of options into separate lines.
*
* Normally, these options do not need to be altered to allow an application to compile and run correctly on a different board or AVR to the
* current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR model and cannot be
* made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both), the USB
* interface speed (Low or Full speed) and other LUFA configuration options can be set here - refer to the library documentation for details on the
* configuration parameters.
* \section Sec_LUFA_PATH The LUFA_PATH Parameter
* As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This
* value specifies the path to the LUFA library base relative to the path of the project makefile.
*
* \section Sec_LUFA_OPTS The LUFA_OPTS Parameter
* This value is similar to the CDEFS parameter listed elsewhere -- indeed, it is simply a convenient place to group LUFA related tokens away from the
* application's compile time tokens. Normally, these options do not need to be altered to allow an application to compile and run correctly on a
* different board or AVR to the current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR
* model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both),
* the USB interface speed (Low or Full speed) and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details
* on the available LUFA compile time configuration options.
*/