Move matrix config to info.json, part 4 (#20001)

keyboards/donutcables/budget96/config.h

@@ -20,11 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLED_NUM 18
 
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

keyboards/donutcables/budget96/info.json

@@ -8,6 +8,11 @@
         "pid": "0xB960",
         "device_version": "2.0.0"
     },
+    "matrix_pins": {
+        "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],
+        "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "D4"
     },

keyboards/donutcables/scrabblepad/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D5, F1, C7, F2, C6, F3, C5, F4, C4, F5, C3, F6, C2, F7, C1 }
-#define MATRIX_COL_PINS { D6, D7, E0, E1, B7, D2, D3, D4, C0, B4, B5, B6, F0, E6, E7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/donutcables/scrabblepad/info.json

@@ -8,6 +8,11 @@
     "pid": "0x21D7",
     "device_version": "1.0.0"
   },
+  "matrix_pins": {
+    "cols": ["D6", "D7", "E0", "E1", "B7", "D2", "D3", "D4", "C0", "B4", "B5", "B6", "F0", "E6", "E7"],
+    "rows": ["D5", "F1", "C7", "F2", "C6", "F3", "C5", "F4", "C4", "F5", "C3", "F6", "C2", "F7", "C1"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "at90usb1286",
   "bootloader": "halfkay",
   "layouts": {