ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Added new NO_DEVICE_SELF_POWER and NO_DEVICE_REMOTE_WAKEUP compile time options.

Browse source
This commit is contained in:
Dean Camera 2009-12-20 13:00:49 +00:00
parent 77cd3a42a7
commit 8b75659563
14 changed files with 146 additions and 86 deletions
Download patch file Download diff file Expand all files Collapse all files

1
LUFA/Drivers/USB/HighLevel/StdDescriptors.h
View file

@ -119,6 +119,7 @@
*/
#define USB_CONFIG_ATTR_BUSPOWERED 0x80
/** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t
* descriptor's ConfigAttributes value to indicate that the specified configuration can draw its power
* from the device's own power source.

18
LUFA/Drivers/USB/LowLevel/DevChapter9.c
View file

@ -36,8 +36,14 @@
#include "DevChapter9.h"
uint8_t USB_ConfigurationNumber;
bool USB_RemoteWakeupEnabled;
#if !defined(NO_DEVICE_SELF_POWER)
bool USB_CurrentlySelfPowered;
#endif
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
bool USB_RemoteWakeupEnabled;
#endif
void USB_Device_ProcessControlRequest(void)
{
@ -302,12 +308,16 @@ static void USB_Device_GetStatus(void)
switch (USB_ControlRequest.bmRequestType)
{
case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE):
#if !defined(NO_DEVICE_SELF_POWER)
if (USB_CurrentlySelfPowered)
CurrentStatus |= FEATURE_SELFPOWERED_ENABLED;
#endif
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
if (USB_RemoteWakeupEnabled)
CurrentStatus |= FEATURE_REMOTE_WAKEUP_ENABLED;
#endif
break;
#if !defined(CONTROL_ONLY_DEVICE)
case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT):
@ -336,10 +346,12 @@ static void USB_Device_ClearSetFeature(void)
switch (USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT)
{
case REQREC_DEVICE:
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
if ((uint8_t)USB_ControlRequest.wValue == FEATURE_REMOTE_WAKEUP)
USB_RemoteWakeupEnabled = (USB_ControlRequest.bRequest == REQ_SetFeature);
else
return;
#endif
break;
#if !defined(CONTROL_ONLY_DEVICE)

41
LUFA/Drivers/USB/LowLevel/DevChapter9.h
View file

@ -82,23 +82,32 @@
*/
extern uint8_t USB_ConfigurationNumber;
/** Indicates if the host is currently allowing the device to issue remote wakeup events. If this
* flag is cleared, the device should not issue remote wakeup events to the host.
*
* \note This variable should be treated as read-only in the user application, and never manually
* changed in value.
*
* \ingroup Group_Device
*/
extern bool USB_RemoteWakeupEnabled;
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
/** Indicates if the host is currently allowing the device to issue remote wakeup events. If this
* flag is cleared, the device should not issue remote wakeup events to the host.
*
* \note This variable should be treated as read-only in the user application, and never manually
* changed in value.
*
* \note To reduce FLASH usage of the compiled applications where Remote Wakeup is not supported,
* this global and the underlying management code can be disabled by defining the
* NO_DEVICE_REMOTE_WAKEUP token in the project makefile and passing it to the compiler via
* the -D switch.
*
* \ingroup Group_Device
*/
extern bool USB_RemoteWakeupEnabled;
#endif
/** Indicates if the device is currently being powered by its own power supply, rather than being
* powered by the host's USB supply. This flag should remain cleared if the device does not
* support self powered mode, as indicated in the device descriptors.
*
* \ingroup Group_Device
*/
extern bool USB_CurrentlySelfPowered;
#if !defined(NO_DEVICE_SELF_POWER)
/** Indicates if the device is currently being powered by its own power supply, rather than being
* powered by the host's USB supply. This flag should remain cleared if the device does not
* support self powered mode, as indicated in the device descriptors.
*
* \ingroup Group_Device
*/
extern bool USB_CurrentlySelfPowered;
#endif
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)

14
LUFA/Drivers/USB/LowLevel/Device.h
View file

@ -83,7 +83,8 @@
* \note This macro should only be used if the device has indicated to the host that it
* supports the Remote Wakeup feature in the device descriptors, and should only be
* issued if the host is currently allowing remote wakeup events from the device (i.e.,
* the \ref USB_RemoteWakeupEnabled flag is set).
* the \ref USB_RemoteWakeupEnabled flag is set). When the NO_DEVICE_REMOTE_WAKEUP compile
* time option is used, this macro is unavailable.
*
* \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors.
*/
@ -96,7 +97,8 @@
* a sent RMWAKEUP request was accepted or rejected by the host.
*
* \note This macro should only be used if the device has indicated to the host that it
* supports the Remote Wakeup feature in the device descriptors.
* supports the Remote Wakeup feature in the device descriptors. When the NO_DEVICE_REMOTE_WAKEUP
* compile time option is used, this macro is unavailable.
*
* \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors.
*
@ -123,10 +125,12 @@
*/
static inline bool USB_Device_DisableSOFEvents(void);
#else
#define USB_Device_SendRemoteWakeup() MACROS{ UDCON |= (1 << RMWKUP); }MACROE
#define USB_Device_IsRemoteWakeupSent() ((UDCON & (1 << RMWKUP)) ? false : true)
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
#define USB_Device_SendRemoteWakeup() MACROS{ UDCON |= (1 << RMWKUP); }MACROE
#define USB_Device_IsRemoteWakeupSent() ((UDCON & (1 << RMWKUP)) ? false : true)
#endif
#define USB_Device_IsUSBSuspended() ((UDINT & (1 << SUSPI)) ? true : false)
#define USB_Device_EnableSOFEvents() MACROS{ USB_INT_Enable(USB_INT_SOFI); }MACROE

10
LUFA/Drivers/USB/LowLevel/LowLevel.c
View file

@ -142,8 +142,14 @@ void USB_ResetInterface(void)
#if defined(USB_CAN_BE_DEVICE)
USB_DeviceState = DEVICE_STATE_Unattached;
USB_ConfigurationNumber = 0;
USB_RemoteWakeupEnabled = false;
USB_CurrentlySelfPowered = false;
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
USB_RemoteWakeupEnabled = false;
#endif
#if !defined(NO_DEVICE_SELF_POWER)
USB_CurrentlySelfPowered = false;
#endif
#endif
if (!(USB_Options & USB_OPT_MANUAL_PLL))

7
LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_W.c
View file

@ -21,13 +21,16 @@ uint8_t TEMPLATE_FUNC_NAME (const void* Buffer, uint16_t Length)
if (Endpoint_IsINReady())
{
while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint();
while (Length && (BytesInEndpoint < USB_ControlEndpointSize))
{
TEMPLATE_TRANSFER_BYTE(DataStream);
Length--;
BytesInEndpoint++;
}
LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
LastPacketFull = (BytesInEndpoint == USB_ControlEndpointSize);
Endpoint_ClearIN();
}
}

1
LUFA/ManPages/ChangeLog.txt
View file

@ -25,6 +25,7 @@
* - Added new EVK527 board target
* - Added new USB_Host_GetDeviceStringDescriptor() convenience function
* - Added new LEDNotification project to the library, to give a visual LED notification on new events from the host
* - Added new NO_DEVICE_REMOTE_WAKEUP and NO_DEVICE_SELF_POWER compile time options
*
* <b>Changed:</b>
* - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of keycodes

128
LUFA/ManPages/CompileTimeTokens.txt
View file

@ -68,9 +68,57 @@
* the HID.h file documentation.
*
*
* \section Sec_SummaryUSBTokens USB Driver Related Tokens
* \section Sec_SummaryUSBTokens General USB Driver Related Tokens
* This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.
*
* <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n
* Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the
* host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/
* pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,
* allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed
* by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as
* a parameter.
*
* <b>FAST_STREAM_TRANSFERS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n
* By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full
* or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However,
* this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is
* used, bytes are sent or recevied in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption
* due to the extra code required to deal with byte alignment.
*
* <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
* By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
* voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options
* mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing
* the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an
* Options parameter.
*
* <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n
* For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the
* mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to
* save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which
* do not support host mode.
*
* <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n
* Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.
*
* <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
* When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host
* must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout
* period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.
*
* <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n
* On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of
* VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be
* slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is
* required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global
* can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.
* When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.
*
*
* \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens
* This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode.
*
* <b>USE_RAM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n
* Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one
* of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime.
@ -101,13 +149,6 @@
* reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
* implicitly via the library APIs.
*
* <b>HOST_STATE_AS_GPIOR</b> - ( \ref Group_Host ) \n
* One of the most frequenty used global variables in the stack is the USB_HostState global, which indicates the current state of
* the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token
* may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR
* reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
* implicitly via the library APIs.
*
* <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - ( \ref Group_Device ) \n
* By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces
* the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in
@ -119,20 +160,31 @@
* is through control endpoint requests. Defining this token will remove several features related to the selection and control of device
* endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided.
*
* <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n
* Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the
* host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/
* pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,
* allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed
* by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as
* a parameter.
* <b>INTERRUPT_CONTROL_ENDPOINT</b> - ( \ref Group_USBManagement ) \n
* Some applications prefer to not call the USB_USBTask() management task reguarly while in device mode, as it can complicate code significantly.
* Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control
* endpoint entirely via USB controller interrupts asynchronously to the user application.
*
* <b>FAST_STREAM_TRANSFERS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n
* By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full
* or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However,
* this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is
* used, bytes are sent or recevied in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption
* due to the extra code required to deal with byte alignment.
* <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device ) \n
* Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices,
* the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch.
*
* <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device ) \n
* USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may
* query the device to determine the current power source, via \ref USB_CurrentlySelfPowered. For solely bus powered devices, this global and the
* code required to manage it may be disabled by passing this token to the library via the -D switch.
*
*
* \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens
*
* This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode.
*
* <b>HOST_STATE_AS_GPIOR</b> - ( \ref Group_Host ) \n
* One of the most frequenty used global variables in the stack is the USB_HostState global, which indicates the current state of
* the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token
* may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR
* reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
* implicitly via the library APIs.
*
* <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_Host ) \n
* When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached
@ -144,38 +196,4 @@
* they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled
* back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device
* settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.
*
* <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
* By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
* voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options
* mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing
* the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an
* Options parameter.
*
* <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n
* For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the
* mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to
* save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which
* do not support host mode.
*
* <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n
* Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.
*
* <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
* When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host
* must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout
* period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.
*
* <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n
* On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of
* VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be
* slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is
* required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global
* can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.
* When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.
*
* <b>INTERRUPT_CONTROL_ENDPOINT</b> - ( \ref Group_USBManagement ) \n
* Some applications prefer to not call the USB_USBTask() management task reguarly while in device mode, as it can complicate code significantly.
* Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control
* endpoint entirely via USB controller interrupts asynchronously to the user application.
*/