Keyboards/RGBKB/Mün (#13239)

keyboards/rgbkb/mun/config.h

@@ -0,0 +1,106 @@
+/*
+ * ----------------------------------------------------------------------------
+ * "THE BEER-WARE LICENSE" (Revision 42):
+ * <https://github.com/Legonut> wrote this file.  As long as you retain this
+ * notice you can do whatever you want with this stuff. If we meet some day, and
+ * you think this stuff is worth it, you can buy me a beer in return. David Rauseo
+ * ----------------------------------------------------------------------------
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x3535
+#define PRODUCT_ID      0x3505
+#define MANUFACTURER    RGBKB
+#define PRODUCT         Mün
+
+#define USB_POLLING_INTERVAL_MS 1
+
+/* Matrix Configuration - Rows are doubled up */
+#define MATRIX_ROWS 14
+// B1, A2 reserved for encoder / touch encoder support
+#define MATRIX_ROW_PINS { A1, A3, B3, A13, B15, B1, A2 }
+#define MATRIX_COLS 7
+#define MATRIX_COL_PINS { A0, B11, B0, B10, B12, B2, A8 }
+#define MATRIX_IO_DELAY 5
+
+#define BUSY_WAIT
+#define BUSY_WAIT_INSTRUCTIONS 35 // Increase if two rows are pressed at the same time.
+#define GPIO_INPUT_PIN_DELAY 10
+
+/* Touchbar adjustments */
+#define TOUCH_DEADZONE 50 // width of a "button", wider inputs will be interpreted as a swipe
+#define TOUCH_TERM 350 // time of a "button" touch, longer inputs will be a swipe
+#define TOUCH_RESOLUTION 25 // sensitivity of swipes, lower=faster
+
+/* Encoder Configuration */
+#define ENCODERS_PAD_A { B8, B9 }
+#define ENCODERS_PAD_B { A14, A15 }
+#define TOUCH_SEGMENTS 3
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* CRC Configuration */
+#define CRC8_OPTIMIZE_SPEED
+#define CRC8_USE_TABLE
+
+/* Split Keyboard Configuration */
+#define EE_HANDS
+#define SPLIT_USB_DETECT
+// also handles the SERIAL_USART_TX_PIN define
+#define SOFT_SERIAL_PIN A9
+#define SERIAL_USART_TX_PAL_MODE 7
+#define SERIAL_USART_TIMEOUT 5
+#define SERIAL_USART_DRIVER SD1
+//#define SERIAL_USART_FULL_DUPLEX - Waiting on reunification pr
+#if SERIAL_USART_FULL_DUPLEX
+    #define SERIAL_USART_RX_PIN A10
+    #define SERIAL_USART_RX_PAL_MODE 7
+    // Mun connects TX to TX and RX to RX as we were planning on i2c split, so we need pin swap for full duplex
+    #define SERIAL_USART_PIN_SWAP
+    #define SERIAL_USART_SPEED (2 * 1024 * 1024)
+#else
+    #define SERIAL_USART_SPEED (1 * 1024 * 1024)
+#endif
+
+/* Split Transport Features */
+#define SPLIT_TRANSPORT_MIRROR
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_LED_STATE_ENABLE
+#define SPLIT_TRANSACTION_IDS_KB TOUCH_ENCODER_SYNC, RGB_MENU_SYNC
+
+/* RGB LED Configuration */
+#define RGB_DI_PIN B5
+#define RGBLED_NUM 98
+#define RGBLED_SPLIT { 49, 49 }
+#define RGBLIGHT_ANIMATIONS
+
+#define DRIVER_LED_TOTAL RGBLED_NUM
+#define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#define RGB_MATRIX_CENTER { 128, 34 }
+#define RGB_MATRIX_LED_FLUSH_LIMIT 33
+#define RGB_MATRIX_LED_PROCESS_LIMIT 10
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+#if RGB_UNLIMITED_POWER
+  #define RGBLIGHT_LIMIT_VAL 255
+#else
+  #define RGBLIGHT_LIMIT_VAL 127
+#endif
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL
+
+#define WS2812_PWM_DRIVER PWMD3
+#define WS2812_PWM_CHANNEL 2
+#define WS2812_PWM_PAL_MODE 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM3
+#define WS2812_DMA_CHANNEL 3
+
+#define TOUCH_UPDATE_INTERVAL 33
+#define OLED_UPDATE_INTERVAL 33
+#define TAP_CODE_DELAY 5