ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Fix AVRISP-MKII clone project's TPI Chip Erase command processing - ensure erase location is the high byte in the given address space, check NVMBUSY for completion rather than the NVM Bus Enable bit.

Browse source 
Change If-Else chains over to switch statements in XPROGProtocol.c for clarity.
This commit is contained in:
Dean Camera 2010-02-08 03:16:09 +00:00
parent 6a48efd3bd
commit 7ae91099e9
9 changed files with 93 additions and 70 deletions
Download patch file Download diff file Expand all files Collapse all files

13
LUFA/Drivers/USB/Class/Host/CDC.h
View file

@ -92,12 +92,13 @@
struct
{
uint8_t HostToDevice; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_*
* masks.
* masks - to notify the device of changes to these values, call the
* \ref CDC_Host_SendControlLineStateChange() function.
*/
uint8_t DeviceToHost; /**< Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_*
* masks.
* masks. This value is updated each time \ref CDC_Host_USBTask() is called.
*/
} ControlLineStates;
} ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */
struct
{
@ -109,7 +110,11 @@
* CDCDevice_LineCodingParity_t enum
*/
uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} LineEncoding;
} LineEncoding; /** Line encoding used in the virtual serial port, for the device's information. This is generally
* only used if the virtual serial port data is to be reconstructed on a physical UART. When set
* by the host application, the \ref CDC_Host_SetLineEncoding() function must be called to push
* the changes to the device.
*/
} State; /**< State data for the USB class interface within the device. All elements in this section
* <b>may</b> be set to initial values, but may also be ignored to default to sane values when
* the interface is enumerated.