ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.

Browse source
This commit is contained in:
Dean Camera 2010-06-16 11:01:01 +00:00
parent 13ea700b35
commit 711542ee89
40 changed files with 140 additions and 687 deletions
Download patch file Download diff file Expand all files Collapse all files

4
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
View file

@ -199,7 +199,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16
XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
XPROGTarget_SendByte(ReadSize - 1);
/* Send a LD command with indirect access and postincrement to read out the bytes */
/* Send a LD command with indirect access and post-increment to read out the bytes */
XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
while (ReadSize-- && TimeoutMSRemaining)
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
@ -286,7 +286,7 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Eras
XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
XPROGTarget_SendByte(WriteSize - 1);
/* Send a ST command with indirect access and postincrement to write the bytes */
/* Send a ST command with indirect access and post-increment to write the bytes */
XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
while (WriteSize--)
XPROGTarget_SendByte(*(WriteBuffer++));

4
Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
View file

@ -256,7 +256,7 @@ static void XPROGProtocol_Erase(void)
break;
}
/* Erase the target memory, indicate timeout if ocurred */
/* Erase the target memory, indicate timeout if occurred */
if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
ReturnStatus = XPRG_ERR_TIMEOUT;
}
@ -267,7 +267,7 @@ static void XPROGProtocol_Erase(void)
else
EraseCommand = TINY_NVM_CMD_SECTIONERASE;
/* Erase the target memory, indicate timeout if ocurred */
/* Erase the target memory, indicate timeout if occurred */
if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
ReturnStatus = XPRG_ERR_TIMEOUT;
}

4
Projects/XPLAINBridge/Lib/SoftUART.c
View file

@ -54,12 +54,12 @@ static uint8_t RX_Data;
/** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
void SoftUART_Init(void)
{
/* Set TX pin to output high, enable RX pullup */
/* Set TX pin to output high, enable RX pull-up */
STXPORT |= (1 << STX);
STXDDR |= (1 << STX);
SRXPORT |= (1 << SRX);
/* Enable INT0 for the detection of incomming start bits that signal the start of a byte */
/* Enable INT0 for the detection of incoming start bits that signal the start of a byte */
EICRA = (1 << ISC01);
EIMSK = (1 << INT0);

2
Projects/XPLAINBridge/USARTDescriptors.c
View file

@ -218,7 +218,7 @@ USB_Descriptor_String_t PROGMEM USART_ProductString =
.UnicodeString = L"LUFA XPLAIN Bridge"
};
/** Descriptior retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
/** Descriptor retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
* callback function in the main source file, to retrieve the device's descriptors when in USART bridge mode.
*/
uint16_t USART_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)

2
Projects/XPLAINBridge/XPLAINBridge.c
View file

@ -156,7 +156,7 @@ void SetupHardware(void)
MCUCR |= (1 << JTD);
MCUCR |= (1 << JTD);
/* Enable pullup on the JTAG TDI pin so we can use it to select the mode */
/* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
PORTF |= (1 << 7);
_delay_ms(10);