ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.

Browse source
This commit is contained in:
Dean Camera 2010-06-16 11:01:01 +00:00
parent 13ea700b35
commit 711542ee89
40 changed files with 140 additions and 687 deletions
Download patch file Download diff file Expand all files Collapse all files

8
LUFA/Drivers/USB/HighLevel/Events.h
View file

@ -188,7 +188,7 @@
* \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
* this means that the current connection state is derived from the bus suspension and wake up events by default,
* which is not always accurate (host may suspend the bus while still connected). If the actual connection state
* needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
* needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
* passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
* and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
* \n\n
@ -206,7 +206,7 @@
* \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
* this means that the current connection state is derived from the bus suspension and wake up events by default,
* which is not always accurate (host may suspend the bus while still connected). If the actual connection state
* needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
* needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
* passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
* and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
* \n\n
@ -226,7 +226,7 @@
* This event is time-critical; each packet within the request transaction must be acknowledged or
* sent within 50ms or the host will abort the transfer.
*
* The library interally handles all standard control requests with the exceptions of SYNC FRAME,
* The library internally handles all standard control requests with the exceptions of SYNC FRAME,
* SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left
* for the user to process via this event if desired. If not handled in the user application, requests
* are automatically STALLed.
@ -307,7 +307,7 @@
* millisecond timer source when the USB bus is enumerated in device mode to a USB host.
*
* This event is time-critical; it is run once per millisecond and thus long handlers will significantly
* degrade device performance. This event should only be enabled when needed to reduce device wakeups.
* degrade device performance. This event should only be enabled when needed to reduce device wake-ups.
*
* \note This event is not normally active - it must be manually enabled and disabled via the
* \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration.