ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Fix PDI code - must send NVM enable key least significant byte first, need to make sure Tx and Rx is switched correctly including disabling the output on the Tx line when receiving.

Browse source
This commit is contained in:
Dean Camera 2009-12-11 04:04:34 +00:00
parent 7e5966c1a8
commit 66201a05e9
3 changed files with 50 additions and 18 deletions
Download patch file Download diff file Expand all files Collapse all files

12
Projects/AVRISP/Lib/PDIProtocol.c
View file

@ -111,18 +111,20 @@ static void PDIProtocol_EnterXPROGMode(void)
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
PDITarget_SendByte(PDI_CMD_KEY);
for (uint8_t i = 0; i < sizeof(PDI_NVMENABLE_KEY); i++)
PDITarget_SendByte(PDI_NVMENABLE_KEY[i]);
for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
/* Poll the STATUS register to check to see if NVM access has been enabled */
uint8_t NVMAttemptsRemaining = 200;
while (NVMAttemptsRemaining--)
uint8_t NVMAttemptsRemaining = 150;
while (NVMAttemptsRemaining)
{
_delay_ms(1);
PDITarget_SendByte(PDI_CMD_LDCS | PD_STATUS_REG);
PDITarget_SendByte(PDI_CMD_LDCS | PD_STATUS_REG);
if (PDITarget_ReceiveByte() & PDI_STATUS_NVM)
break;
NVMAttemptsRemaining--;
}
Endpoint_Write_Byte(CMD_XPROG);