Add the start of a new Mass Storage class bootloader.

Bootloaders/Incomplete/MassStorage/makefile

@@ -0,0 +1,48 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2013.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = MassStorage
+SRC          = $(TARGET).c Descriptors.c Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB        := 128
+BOOT_SECTION_SIZE_KB := 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - $(strip $(1)) )
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk