Add basic hardware mapping information for all supported boards.

LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel USBKEY.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h

@@ -42,6 +42,12 @@
  *
  *  Board specific Dataflash driver header for the Atmel USBKEY board.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTE.0</td><td>SPI0</td></tr>
+ *    <tr><td>DATAFLASH_CHIP2</td><td>AT45DB642D (8MB)</td><td>PORTE.1</td><td>SPI0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h

@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel USBKEY.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTB.6</td><td>PORTB.7</td><td>PORTE.4</td><td>PORTE.5</td><td>PORTB.5</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h

@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel USBKEY.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>Bicolor Indicator 1</td><td>Low</td><td>PORTD.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>Bicolor Indicator 1</td><td>Low</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Red</td><td>Bicolor Indicator 2</td><td>Low</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>Bicolor Indicator 2</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */