ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

Browse source
This commit is contained in:
Dean Camera 2010-10-13 14:05:35 +00:00
parent a8871c7fba
commit 5a4def7478
760 changed files with 12883 additions and 12164 deletions
Download patch file Download diff file Expand all files Collapse all files

24
Projects/AVRISP-MKII/AVRISP-MKII.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -43,7 +43,7 @@ int main(void)
{
SetupHardware();
V2Protocol_Init();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
sei();
@ -54,7 +54,7 @@ int main(void)
mode - either VBUS, or sourced from the VTARGET pin of the programming connectors */
LEDs_ChangeLEDs(LEDMASK_VBUSPOWER, (PIND & (1 << 0)) ? 0 : LEDMASK_VBUSPOWER);
#endif
AVRISP_Task();
USB_USBTask();
}
@ -72,7 +72,7 @@ void SetupHardware(void)
/* Hardware Initialization */
LEDs_Init();
USB_Init();
USB_Init();
}
/** Event handler for the library USB Connection event. */
@ -100,9 +100,9 @@ void EVENT_USB_Device_ConfigurationChanged(void)
ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
/* Indicate endpoint configuration success or failure */
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Processes incoming V2 Protocol commands from the host, returning a response when required. */
@ -115,7 +115,7 @@ void AVRISP_Task(void)
V2Params_UpdateParamValues();
Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
/* Check to see if a V2 Protocol command has been received */
if (Endpoint_IsOUTReceived())
{

23
Projects/AVRISP-MKII/AVRISP-MKII.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -45,11 +45,11 @@
#include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#if defined(ADC)
#include <LUFA/Drivers/Peripheral/ADC.h>
#endif
#include "Descriptors.h"
#include "Lib/V2Protocol.h"
@ -68,16 +68,17 @@
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2)
/** LED mask for the library LED driver, to indicate that the target is being powered by VBUS. */
#define LEDMASK_VBUSPOWER LEDS_LED3
/* Function Prototypes: */
void SetupHardware(void);
void AVRISP_Task(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
#endif

21
Projects/AVRISP-MKII/AVRISP-MKII.txt
View file

@ -3,7 +3,7 @@
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage AVRISP MKII Programmer Project
*
* \section SSec_Compat Project Compatibility:
@ -28,7 +28,7 @@
* <td><b>USB Class:</b></td>
* <td>Vendor Specific Class</td>
* </tr>
* <tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
@ -42,7 +42,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section SSec_Description Project Description:
*
* Firmware for an AVRStudio compatible AVRISP-MKII clone programmer. This project will enable the USB AVR series of
* microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within AVRStudio. In its
@ -240,31 +240,31 @@
* <td>VTARGET_ADC_CHANNEL</td>
* <td>Makefile LUFA_OPTS</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
* <i>Ignored when compiled for targets lacking an ADC.</i></td>
* <i>Ignored when compiled for targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>ENABLE_ISP_PROTOCOL</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to enable SPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>
* <td>Define to enable SPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>ENABLE_XPROG_PROTOCOL</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to enable PDI and TPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>
* <td>Define to enable PDI and TPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>NO_VTARGET_DETECT</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
* to report a fixed 5V target voltage to the host regardless of the real target voltage. <i>Ignored when compiled for
* targets lacking an ADC.</i></td>
* targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>VTARGET_REF_VOLTS</td>
* <td>Makefile LUFA_OPTS</td>
* <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply
* voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage
* to the ADC. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
* to the ADC. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
* </tr>
* <tr>
* <td>VTARGET_SCALE_FACTOR</td>
@ -272,8 +272,8 @@
* <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the
* ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be
* measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set
* to 2. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
* </tr>
* to 2. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
* </tr>
* <tr>
* <td>LIBUSB_DRIVER_COMPAT</td>
* <td>Makefile LUFA_OPTS</td>
@ -282,3 +282,4 @@
* </tr>
* </table>
*/

77
Projects/AVRISP-MKII/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -30,9 +30,9 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
@ -45,22 +45,22 @@
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0xFF,
.SubClass = 0x00,
.Protocol = 0x00,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2104,
.ReleaseNumber = VERSION_BCD(02.00),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = 0x03,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
@ -71,41 +71,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.AVRISP_Interface =
.AVRISP_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0xFF,
.SubClass = 0x00,
.Protocol = 0x00,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.AVRISP_DataInEndpoint =
.AVRISP_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | AVRISP_DATA_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AVRISP_DATA_EPSIZE,
@ -115,7 +115,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.AVRISP_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | AVRISP_DATA_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AVRISP_DATA_EPSIZE,
@ -130,7 +130,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
@ -141,7 +141,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
@ -152,7 +152,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String},
.UnicodeString = L"LUFA AVRISP MkII Clone"
};
@ -162,7 +162,7 @@ USB_Descriptor_String_t PROGMEM ProductString =
USB_Descriptor_String_t PROGMEM SerialString =
{
.Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
.UnicodeString = L"0000A00128255"
};
@ -181,41 +181,42 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
case 0x03:
Address = &SerialString;
Size = pgm_read_byte(&SerialString.Header.Size);
break;
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

15
Projects/AVRISP-MKII/Descriptors.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,7 +32,7 @@
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
@ -79,3 +79,4 @@
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

132
Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -53,7 +53,7 @@ void ISPProtocol_EnterISPMode(void)
uint8_t PollIndex;
uint8_t EnterProgBytes[4];
} Enter_ISP_Params;
Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
@ -61,9 +61,9 @@ void ISPProtocol_EnterISPMode(void)
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ResponseStatus = STATUS_CMD_FAILED;
CurrentAddress = 0;
/* Set up the synchronous USART to generate the .5MHz recovery clock on XCK pin */
UBRR1 = (F_CPU / 500000UL);
UCSR1B = (1 << TXEN1);
@ -71,7 +71,7 @@ void ISPProtocol_EnterISPMode(void)
DDRD |= (1 << 5);
/* Perform execution delay, initialize SPI bus */
ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
ISPTarget_Init();
/* Continuously attempt to synchronize with the target until either the number of attempts specified
@ -88,7 +88,7 @@ void ISPProtocol_EnterISPMode(void)
ISPProtocol_DelayMS(Enter_ISP_Params.ByteDelay);
ResponseBytes[RByte] = ISPTarget_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
}
/* Check if polling disabled, or if the polled value matches the expected value */
if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue))
{
@ -116,7 +116,7 @@ void ISPProtocol_LeaveISPMode(void)
} Leave_ISP_Params;
Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
@ -155,13 +155,13 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
uint8_t PollValue2;
uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
} Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting
Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) -
sizeof(Write_Memory_Params.ProgData)), NO_STREAM_CALLBACK);
Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
{
Endpoint_ClearOUT();
@ -173,14 +173,14 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
Endpoint_ClearIN();
return;
}
Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite, NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ProgrammingStatus = STATUS_CMD_OK;
uint8_t ProgrammingStatus = STATUS_CMD_OK;
uint16_t PollAddress = 0;
uint8_t PollValue = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 :
Write_Memory_Params.PollValue2;
@ -190,7 +190,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)
{
uint16_t StartAddress = (CurrentAddress & 0xFFFF);
/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
if (MustLoadExtendedAddress)
{
@ -203,12 +203,12 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
{
bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++);
ISPTarget_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
ISPTarget_SendByte(CurrentAddress >> 8);
ISPTarget_SendByte(CurrentAddress & 0xFF);
ISPTarget_SendByte(ByteToWrite);
/* AVR FLASH addressing requires us to modify the write command based on if we are writing a high
* or low byte at the current word address */
if (V2Command == CMD_PROGRAM_FLASH_ISP)
@ -220,14 +220,14 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP))
Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK;
PollAddress = (CurrentAddress & 0xFFFF);
}
PollAddress = (CurrentAddress & 0xFFFF);
}
/* EEPROM increments the address on each byte, flash needs to increment on each word */
if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP))
CurrentAddress++;
}
/* If the current page must be committed, send the PROGRAM PAGE command to the target */
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
{
@ -235,12 +235,12 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
ISPTarget_SendByte(StartAddress >> 8);
ISPTarget_SendByte(StartAddress & 0xFF);
ISPTarget_SendByte(0x00);
/* Check if polling is possible and enabled, if not switch to timed delay mode */
if (!(PollAddress) && (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_VALUE_MASK))
{
Write_Memory_Params.ProgrammingMode &= ~PROG_MODE_PAGED_VALUE_MASK;
Write_Memory_Params.ProgrammingMode |= PROG_MODE_PAGED_TIMEDELAY_MASK;
Write_Memory_Params.ProgrammingMode |= PROG_MODE_PAGED_TIMEDELAY_MASK;
}
ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue,
@ -248,7 +248,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
/* Check to see if the FLASH address has crossed the extended address boundary */
if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
MustLoadExtendedAddress = true;
MustLoadExtendedAddress = true;
}
}
else
@ -258,7 +258,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
{
bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++);
/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
if (MustLoadExtendedAddress)
{
@ -270,12 +270,12 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
ISPTarget_SendByte(CurrentAddress >> 8);
ISPTarget_SendByte(CurrentAddress & 0xFF);
ISPTarget_SendByte(ByteToWrite);
/* AVR FLASH addressing requires us to modify the write command based on if we are writing a high
* or low byte at the current word address */
if (V2Command == CMD_PROGRAM_FLASH_ISP)
Write_Memory_Params.ProgrammingCommands[0] ^= READ_WRITE_HIGH_BYTE_MASK;
/* Save previous programming mode in case we modify it for the current word */
uint8_t PreviousProgrammingMode = Write_Memory_Params.ProgrammingMode;
@ -283,18 +283,18 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
{
if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP))
Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK;
PollAddress = (CurrentAddress & 0xFFFF);
}
else if (!(Write_Memory_Params.ProgrammingMode & PROG_MODE_WORD_READYBUSY_MASK))
{
Write_Memory_Params.ProgrammingMode &= ~PROG_MODE_WORD_VALUE_MASK;
Write_Memory_Params.ProgrammingMode |= PROG_MODE_WORD_TIMEDELAY_MASK;
Write_Memory_Params.ProgrammingMode |= PROG_MODE_WORD_TIMEDELAY_MASK;
}
ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue,
Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]);
/* Restore previous programming mode mask in case the current word needed to change it */
Write_Memory_Params.ProgrammingMode = PreviousProgrammingMode;
@ -308,9 +308,9 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
if ((CurrentByte & 0x01) || (V2Command == CMD_PROGRAM_EEPROM_ISP))
{
CurrentAddress++;
if ((V2Command != CMD_PROGRAM_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
MustLoadExtendedAddress = true;
MustLoadExtendedAddress = true;
}
}
}
@ -332,14 +332,14 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
uint16_t BytesToRead;
uint8_t ReadMemoryCommand;
} Read_Memory_Params;
Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params), NO_STREAM_CALLBACK);
Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
@ -358,28 +358,28 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
ISPTarget_SendByte(CurrentAddress >> 8);
ISPTarget_SendByte(CurrentAddress & 0xFF);
Endpoint_Write_Byte(ISPTarget_ReceiveByte());
/* Check if the endpoint bank is currently full, if so send the packet */
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
Endpoint_WaitUntilReady();
}
/* AVR FLASH addressing requires us to modify the read command based on if we are reading a high
* or low byte at the current word address */
if (V2Command == CMD_READ_FLASH_ISP)
Read_Memory_Params.ReadMemoryCommand ^= READ_WRITE_HIGH_BYTE_MASK;
/* EEPROM just increments the address each byte, flash needs to increment on each word and
* also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
* address boundary has been crossed */
if ((CurrentByte & 0x01) || (V2Command == CMD_READ_EEPROM_ISP))
{
CurrentAddress++;
if ((V2Command != CMD_READ_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
MustLoadExtendedAddress = true;
MustLoadExtendedAddress = true;
}
}
@ -387,13 +387,13 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
Endpoint_ClearIN();
/* Ensure last packet is a short packet to terminate the transfer */
if (IsEndpointFull)
{
Endpoint_WaitUntilReady();
Endpoint_WaitUntilReady();
Endpoint_ClearIN();
Endpoint_WaitUntilReady();
Endpoint_WaitUntilReady();
}
}
@ -406,15 +406,15 @@ void ISPProtocol_ChipErase(void)
uint8_t PollMethod;
uint8_t EraseCommandBytes[4];
} Erase_Chip_Params;
Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ResponseStatus = STATUS_CMD_OK;
/* Send the chip erase commands as given by the host to the device */
for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++)
ISPTarget_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]);
@ -424,7 +424,7 @@ void ISPProtocol_ChipErase(void)
ISPProtocol_DelayMS(Erase_Chip_Params.EraseDelayMS);
else
ResponseStatus = ISPTarget_WaitWhileTargetBusy();
Endpoint_Write_Byte(CMD_CHIP_ERASE_ISP);
Endpoint_Write_Byte(ResponseStatus);
Endpoint_ClearIN();
@ -442,7 +442,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command)
uint8_t RetByte;
uint8_t ReadCommandBytes[4];
} Read_FuseLockSigOSCCAL_Params;
Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
@ -454,7 +454,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command)
/* Send the Fuse or Lock byte read commands as given by the host to the device, store response */
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
ResponseBytes[RByte] = ISPTarget_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]);
@ -473,7 +473,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command)
{
uint8_t WriteCommandBytes[4];
} Write_FuseLockSig_Params;
Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
@ -483,7 +483,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command)
/* Send the Fuse or Lock byte program commands as given by the host to the device */
for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
ISPTarget_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(STATUS_CMD_OK);
@ -500,14 +500,14 @@ void ISPProtocol_SPIMulti(void)
uint8_t RxStartAddr;
uint8_t TxData[255];
} SPI_Multi_Params;
Endpoint_Read_Stream_LE(&SPI_Multi_Params, (sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)), NO_STREAM_CALLBACK);
Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes, NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(CMD_SPI_MULTI);
Endpoint_Write_Byte(STATUS_CMD_OK);
@ -521,7 +521,7 @@ void ISPProtocol_SPIMulti(void)
ISPTarget_SendByte(SPI_Multi_Params.TxData[CurrTxPos]);
else
ISPTarget_SendByte(0);
CurrTxPos++;
}
@ -532,28 +532,28 @@ void ISPProtocol_SPIMulti(void)
Endpoint_Write_Byte(ISPTarget_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++]));
else
Endpoint_Write_Byte(ISPTarget_ReceiveByte());
/* Check to see if we have filled the endpoint bank and need to send the packet */
if (!(Endpoint_IsReadWriteAllowed()))
{
Endpoint_ClearIN();
Endpoint_WaitUntilReady();
}
CurrRxPos++;
}
}
Endpoint_Write_Byte(STATUS_CMD_OK);
bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
Endpoint_ClearIN();
/* Ensure last packet is a short packet to terminate the transfer */
if (IsEndpointFull)
{
Endpoint_WaitUntilReady();
Endpoint_WaitUntilReady();
Endpoint_ClearIN();
Endpoint_WaitUntilReady();
Endpoint_WaitUntilReady();
}
}
@ -567,4 +567,4 @@ void ISPProtocol_DelayMS(uint8_t DelayMS)
_delay_ms(1);
}
#endif
#endif

19
Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -39,15 +39,15 @@
/* Includes: */
#include <avr/io.h>
#include <util/delay.h>
#include <LUFA/Drivers/USB/USB.h>
#include "../V2Protocol.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
@ -77,3 +77,4 @@
void ISPProtocol_SPIMulti(void);
void ISPProtocol_DelayMS(uint8_t DelayMS);
#endif

31
Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -132,10 +132,10 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
TCCR1B = 0;
if (PINB & (1 << 3))
SoftSPI_Data |= 0x01;
SoftSPI_Data |= 0x01;
}
PORTB ^= (1 << 1);
PORTB ^= (1 << 1);
}
/** Initialises the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
@ -155,7 +155,7 @@ void ISPTarget_Init(void)
else
{
HardwareSPIMode = false;
DDRB |= ((1 << 1) | (1 << 2));
PORTB |= ((1 << 0) | (1 << 3));
@ -176,7 +176,7 @@ void ISPTarget_ShutDown(void)
else
{
DDRB &= ~((1 << 1) | (1 << 2));
PORTB &= ~((1 << 0) | (1 << 3));
PORTB &= ~((1 << 0) | (1 << 3));
}
}
@ -200,7 +200,7 @@ uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte)
TCCR1B = ((1 << WGM12) | (1 << CS11));
while (SoftSPI_BitsRemaining && TimeoutTicksRemaining);
TCCR1B = 0;
return SoftSPI_Data;
}
@ -214,7 +214,7 @@ void ISPTarget_ChangeTargetResetLine(const bool ResetTarget)
if (ResetTarget)
{
AUX_LINE_DDR |= AUX_LINE_MASK;
if (!(V2Params_GetParameterValue(PARAM_RESET_POLARITY)))
AUX_LINE_PORT |= AUX_LINE_MASK;
else
@ -254,7 +254,7 @@ void ISPTarget_LoadExtendedAddress(void)
ISPTarget_SendByte(LOAD_EXTENDED_ADDRESS_CMD);
ISPTarget_SendByte(0x00);
ISPTarget_SendByte((CurrentAddress & 0x00FF0000) >> 16);
ISPTarget_SendByte(0x00);
ISPTarget_SendByte(0x00);
}
/** Waits until the last issued target memory programming command has completed, via the check mode given and using
@ -296,8 +296,8 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
if (!(TimeoutTicksRemaining))
ProgrammingStatus = STATUS_CMD_TOUT;
break;
break;
case PROG_MODE_WORD_READYBUSY_MASK:
case PROG_MODE_PAGED_READYBUSY_MASK:
ProgrammingStatus = ISPTarget_WaitWhileTargetBusy();
@ -308,3 +308,4 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
}
#endif

19
Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -43,13 +43,13 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SPI.h>
#include "../V2ProtocolParams.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
@ -58,7 +58,7 @@
/* Macros: */
/** Low level device command to issue an extended FLASH address, for devices with other 128KB of FLASH. */
#define LOAD_EXTENDED_ADDRESS_CMD 0x4D
/** Macro to convert an ISP frequency to a number of timer clock cycles for the software SPI driver */
#define TIMER_COMP(freq) ((((F_CPU / 8) / freq) / 2) - 1)
@ -121,3 +121,4 @@
}
#endif

41
Projects/AVRISP-MKII/Lib/V2Protocol.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -59,12 +59,12 @@ void V2Protocol_Init(void)
ADC_SetupChannel(VTARGET_ADC_CHANNEL);
ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | VTARGET_ADC_CHANNEL_MASK);
#endif
/* Timeout timer initialization (10ms period) */
OCR0A = ((F_CPU / 1024) / 100);
TCCR0A = (1 << WGM01);
TIMSK0 = (1 << OCIE0A);
V2Params_LoadNonVolatileParamValues();
}
@ -75,11 +75,11 @@ void V2Protocol_Init(void)
void V2Protocol_ProcessCommand(void)
{
uint8_t V2Command = Endpoint_Read_Byte();
/* Start the timeout management timer */
TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
TCCR0B = ((1 << CS02) | (1 << CS00));
switch (V2Command)
{
case CMD_SIGN_ON:
@ -104,7 +104,7 @@ void V2Protocol_ProcessCommand(void)
break;
case CMD_PROGRAM_FLASH_ISP:
case CMD_PROGRAM_EEPROM_ISP:
ISPProtocol_ProgramMemory(V2Command);
ISPProtocol_ProgramMemory(V2Command);
break;
case CMD_READ_FLASH_ISP:
case CMD_READ_EEPROM_ISP:
@ -139,7 +139,7 @@ void V2Protocol_ProcessCommand(void)
V2Protocol_UnknownCommand(V2Command);
break;
}
/* Disable the timeout management timer */
TCCR0B = 0;
@ -193,10 +193,10 @@ static void V2Protocol_ResetProtection(void)
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(CMD_RESET_PROTECTION);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
Endpoint_ClearIN();
}
@ -209,18 +209,18 @@ static void V2Protocol_GetSetParam(const uint8_t V2Command)
{
uint8_t ParamID = Endpoint_Read_Byte();
uint8_t ParamValue;
if (V2Command == CMD_SET_PARAMETER)
ParamValue = Endpoint_Read_Byte();
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(V2Command);
uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);
if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
{
Endpoint_Write_Byte(STATUS_CMD_OK);
@ -232,7 +232,7 @@ static void V2Protocol_GetSetParam(const uint8_t V2Command)
Endpoint_Write_Byte(V2Params_GetParameterValue(ParamID));
}
else
{
{
Endpoint_Write_Byte(STATUS_CMD_FAILED);
}
@ -250,7 +250,7 @@ static void V2Protocol_LoadAddress(void)
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
if (CurrentAddress & (1UL << 31))
MustLoadExtendedAddress = true;
@ -258,3 +258,4 @@ static void V2Protocol_LoadAddress(void)
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}

24
Projects/AVRISP-MKII/Lib/V2Protocol.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -38,7 +38,7 @@
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include "../Descriptors.h"
#include "V2ProtocolConstants.h"
#include "V2ProtocolParams.h"
@ -48,12 +48,12 @@
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
#endif
#if defined(USB_SERIES_4_AVR) && ((VTARGET_ADC_CHANNEL == 2) || (VTARGET_ADC_CHANNEL == 3))
#error The U4 AVR chips do not contain ADC channels 2 or 3. Please change VTARGET_ADC_CHANNEL or define NO_VTARGET_DETECT in the makefile.
#endif
@ -66,10 +66,10 @@
/** Programmer ID string, returned to the host during the CMD_SIGN_ON command processing. */
#define PROGRAMMER_ID "AVRISP_MK2"
/** Timeout period for each issued command from the host before it is aborted (in 10ms ticks). */
#define COMMAND_TIMEOUT_TICKS 100
/** Command timeout counter register, GPIOR for speed. */
#define TimeoutTicksRemaining GPIOR1
@ -83,7 +83,7 @@
/* Function Prototypes: */
void V2Protocol_Init(void);
void V2Protocol_ProcessCommand(void);
#if defined(INCLUDE_FROM_V2PROTOCOL_C)
static void V2Protocol_UnknownCommand(const uint8_t V2Command);
static void V2Protocol_SignOn(void);

13
Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -86,3 +86,4 @@
#define PARAM_DISCHARGEDELAY 0xA4
#endif

29
Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -40,7 +40,7 @@
uint8_t EEMEM EEPROM_Rest_Polarity = 0x00;
/* Volatile Parameter Values for RAM storage */
static ParameterItem_t ParameterTable[] =
static ParameterItem_t ParameterTable[] =
{
{ .ParamID = PARAM_BUILD_NUMBER_LOW,
.ParamPrivileges = PARAM_PRIV_READ,
@ -109,11 +109,11 @@ void V2Params_UpdateParamValues(void)
* \param[in] ParamID Parameter ID whose privileges are to be retrieved from the table
*
* \return Privileges for the requested parameter, as a mask of PARAM_PRIV_* masks
*/
*/
uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID)
{
ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
if (ParamInfo == NULL)
return 0;
@ -129,14 +129,14 @@ uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID)
* \param[in] ParamID Parameter ID whose value is to be retrieved from the table
*
* \return Current value of the parameter in the table, or 0 if not found
*/
*/
uint8_t V2Params_GetParameterValue(const uint8_t ParamID)
{
ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
if (ParamInfo == NULL)
return 0;
return ParamInfo->ParamValue;
}
@ -163,7 +163,7 @@ void V2Params_SetParameterValue(const uint8_t ParamID,
/* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
if (ParamID == PARAM_RESET_POLARITY)
eeprom_update_byte(&EEPROM_Rest_Polarity, Value);
eeprom_update_byte(&EEPROM_Rest_Polarity, Value);
}
/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
@ -182,9 +182,10 @@ static ParameterItem_t* V2Params_GetParamFromTable(const uint8_t ParamID)
{
if (ParamID == CurrTableItem->ParamID)
return CurrTableItem;
CurrTableItem++;
}
return NULL;
}

20
Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -45,7 +45,7 @@
#if defined(ADC)
#include <LUFA/Drivers/Peripheral/ADC.h>
#endif
#include "V2Protocol.h"
#include "V2ProtocolConstants.h"
#include "ISP/ISPTarget.h"
@ -56,7 +56,7 @@
/** Parameter privilege mask to allow the host PC to change the parameter's value. */
#define PARAM_PRIV_WRITE (1 << 1)
/** Total number of parameters in the parameter table */
#define TABLE_PARAM_COUNT (sizeof(ParameterTable) / sizeof(ParameterTable[0]))
@ -72,12 +72,12 @@
/* Function Prototypes: */
void V2Params_LoadNonVolatileParamValues(void);
void V2Params_UpdateParamValues(void);
uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID);
uint8_t V2Params_GetParameterValue(const uint8_t ParamID);
void V2Params_SetParameterValue(const uint8_t ParamID,
const uint8_t Value);
#if defined(INCLUDE_FROM_V2PROTOCOL_PARAMS_C)
static ParameterItem_t* V2Params_GetParamFromTable(const uint8_t ParamID);
#endif

31
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -138,17 +138,17 @@ bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
/* Set the NVM control register to the NO OP command for memory reading */
TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
XPROGTarget_SendByte(TINY_NVM_CMD_NOOP);
/* Send the address of the location to read from */
TINYNVM_SendPointerAddress(ReadAddress);
while (ReadSize-- && TimeoutTicksRemaining)
{
/* Read the byte of data from the target */
XPROGTarget_SendByte(TPI_CMD_SLD | TPI_POINTER_INDIRECT_PI);
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
}
return (TimeoutTicksRemaining != 0);
}
@ -167,7 +167,7 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
/* Wait until the NVM controller is no longer busy */
if (!(TINYNVM_WaitWhileNVMControllerBusy()))
return false;
/* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */
if (WriteLength & 0x01)
WriteBuffer[WriteLength++] = 0xFF;
@ -175,10 +175,10 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
/* Set the NVM control register to the WORD WRITE command for memory reading */
TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE);
/* Send the address of the location to write to */
TINYNVM_SendPointerAddress(WriteAddress);
while (WriteLength)
{
/* Wait until the NVM controller is no longer busy */
@ -188,7 +188,7 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
/* Write the low byte of data to the target */
XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
XPROGTarget_SendByte(*(WriteBuffer++));
/* Write the high byte of data to the target */
XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
XPROGTarget_SendByte(*(WriteBuffer++));
@ -196,7 +196,7 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
/* Need to decrement the write length twice, since we read out a whole word */
WriteLength -= 2;
}
return true;
}
@ -226,8 +226,9 @@ bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
/* Wait until the NVM controller is no longer busy */
if (!(TINYNVM_WaitWhileNVMControllerBusy()))
return false;
return true;
}
#endif

23
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -40,16 +40,16 @@
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <LUFA/Common/Common.h>
#include "XPROGProtocol.h"
#include "XPROGTarget.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
@ -61,7 +61,7 @@
#define TINY_NVM_CMD_SECTIONERASE 0x14
#define TINY_NVM_CMD_WORDWRITE 0x1D
/* Function Prototypes: */
/* Function Prototypes: */
bool TINYNVM_WaitWhileNVMBusBusy(void);
bool TINYNVM_WaitWhileNVMControllerBusy(void);
bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
@ -80,3 +80,4 @@
#endif
#endif

63
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -76,13 +76,13 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
{
/* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (!(TimeoutTicksRemaining))
return false;
/* Check the status register read response to see if the NVM bus is enabled */
if (StatusRegister & PDI_STATUS_NVM)
return true;
@ -102,7 +102,7 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
/* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
@ -127,7 +127,7 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
/* Wait until the NVM controller is no longer busy */
if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false;
/* Set the NVM command to the correct CRC read command */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
@ -145,7 +145,7 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
/* Wait until the NVM controller is no longer busy */
if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false;
/* Load the PDI pointer register with the DAT0 register start address */
XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);
@ -153,12 +153,12 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
/* Send the REPEAT command to grab the CRC bytes */
XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
XPROGTarget_SendByte(XMEGA_CRC_LENGTH - 1);
/* Read in the CRC bytes from the target */
XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
for (uint8_t i = 0; i < XMEGA_CRC_LENGTH; i++)
((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte();
return (TimeoutTicksRemaining != 0);
}
@ -175,7 +175,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16
/* Wait until the NVM controller is no longer busy */
if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false;
/* Send the READNVM command to the NVM controller for reading of an arbitrary location */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
@ -188,12 +188,12 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16
/* Send the REPEAT command with the specified number of bytes to read */
XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
XPROGTarget_SendByte(ReadSize - 1);
/* Send a LD command with indirect access and post-increment to read out the bytes */
XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
while (ReadSize-- && TimeoutTicksRemaining)
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
return (TimeoutTicksRemaining != 0);
}
@ -215,12 +215,12 @@ bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAd
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(WriteCommand);
/* Send new memory byte to the memory of the target */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendAddress(WriteAddress);
XPROGTarget_SendByte(Byte);
return true;
}
@ -275,13 +275,13 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Eras
/* Send the REPEAT command with the specified number of bytes to write */
XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
XPROGTarget_SendByte(WriteSize - 1);
/* Send a ST command with indirect access and post-increment to write the bytes */
XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
while (WriteSize--)
XPROGTarget_SendByte(*(WriteBuffer++));
}
if (PageMode & XPRG_PAGEMODE_WRITE)
{
/* Wait until the NVM controller is no longer busy */
@ -292,7 +292,7 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Eras
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(WritePageCommand);
/* Send the address of the first page location to write the memory page */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendAddress(WriteAddress);
@ -322,11 +322,11 @@ bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseCommand);
/* Set CMDEX bit in NVM CTRLA register to start the erase sequence */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(1 << 0);
XPROGTarget_SendByte(1 << 0);
}
else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM)
{
@ -356,21 +356,21 @@ bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
/* Send the REPEAT command with the specified number of bytes to write */
XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1);
/* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */
XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++)
XPROGTarget_SendByte(0x00);
/* Send the memory erase command to the target */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseCommand);
/* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(1 << 0);
XPROGTarget_SendByte(1 << 0);
}
else
{
@ -378,18 +378,19 @@ bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseCommand);
/* Other erase modes just need us to address a byte within the target memory space */
XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendAddress(Address);
XPROGTarget_SendByte(0x00);
}
/* Wait until the NVM bus is ready again */
if (!(XMEGANVM_WaitWhileNVMBusBusy()))
return false;
return true;
}
#endif

27
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -40,16 +40,16 @@
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <LUFA/Common/Common.h>
#include "XPROGProtocol.h"
#include "XPROGTarget.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
@ -57,7 +57,7 @@
/* Defines: */
#define XMEGA_CRC_LENGTH 3
#define XMEGA_NVM_REG_ADDR0 0x00
#define XMEGA_NVM_REG_ADDR1 0x01
#define XMEGA_NVM_REG_ADDR2 0x02
@ -70,7 +70,7 @@
#define XMEGA_NVM_REG_INTCTRL 0x0D
#define XMEGA_NVM_REG_STATUS 0x0F
#define XMEGA_NVM_REG_LOCKBITS 0x10
#define XMEGA_NVM_CMD_NOOP 0x00
#define XMEGA_NVM_CMD_CHIPERASE 0x40
#define XMEGA_NVM_CMD_READNVM 0x43
@ -118,7 +118,8 @@
#if defined(INCLUDE_FROM_XMEGANVM_C)
static void XMEGANVM_SendNVMRegAddress(const uint8_t Register);
static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);
static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);
#endif
#endif

105
Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -61,18 +61,18 @@ void XPROGProtocol_SetMode(void)
{
uint8_t Protocol;
} SetMode_XPROG_Params;
Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
Endpoint_Write_Byte(CMD_XPROG_SETMODE);
Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol != XPRG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
Endpoint_ClearIN();
Endpoint_ClearIN();
}
/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
@ -81,7 +81,7 @@ void XPROGProtocol_SetMode(void)
void XPROGProtocol_Command(void)
{
uint8_t XPROGCommand = Endpoint_Read_Byte();
switch (XPROGCommand)
{
case XPRG_CMD_ENTER_PROGMODE:
@ -114,7 +114,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
bool NVMBusEnabled = false;
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
@ -123,11 +123,11 @@ static void XPROGProtocol_EnterXPROGMode(void)
XPROGTarget_EnableTargetPDI();
/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(PDI_RESET_KEY);
/* Lower direction change guard time to 0 USART bits */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);
XPROGTarget_SendByte(0x07);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
@ -142,20 +142,20 @@ static void XPROGProtocol_EnterXPROGMode(void)
{
/* Enable TPI programming mode with the attached target */
XPROGTarget_EnableTargetTPI();
/* Lower direction change guard time to 0 USART bits */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
XPROGTarget_SendByte(0x07);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
XPROGTarget_SendByte(TPI_CMD_SKEY);
XPROGTarget_SendByte(TPI_CMD_SKEY);
for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
/* Wait until the NVM bus becomes active */
NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();
}
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
Endpoint_Write_Byte(NVMBusEnabled ? XPRG_ERR_OK : XPRG_ERR_FAILED);
@ -170,17 +170,17 @@ static void XPROGProtocol_LeaveXPROGMode(void)
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
{
XMEGANVM_WaitWhileNVMBusBusy();
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
/* Do it twice to make sure it takes affect (silicon bug?) */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
XPROGTarget_DisableTargetPDI();
@ -190,12 +190,12 @@ static void XPROGProtocol_LeaveXPROGMode(void)
TINYNVM_WaitWhileNVMBusBusy();
/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
XPROGTarget_SendByte(0x00);
XPROGTarget_DisableTargetTPI();
}
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
Endpoint_Write_Byte(XPRG_ERR_OK);
@ -219,11 +219,11 @@ static void XPROGProtocol_Erase(void)
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t EraseCommand;
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
{
{
/* Determine which NVM command to send to the device depending on the memory to erase */
switch (Erase_XPROG_Params.MemoryType)
{
@ -255,7 +255,7 @@ static void XPROGProtocol_Erase(void)
EraseCommand = XMEGA_NVM_CMD_NOOP;
break;
}
/* Erase the target memory, indicate timeout if occurred */
if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
ReturnStatus = XPRG_ERR_TIMEOUT;
@ -266,16 +266,16 @@ static void XPROGProtocol_Erase(void)
EraseCommand = TINY_NVM_CMD_CHIPERASE;
else
EraseCommand = TINY_NVM_CMD_SECTIONERASE;
/* Erase the target memory, indicate timeout if occurred */
if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
ReturnStatus = XPRG_ERR_TIMEOUT;
}
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_ERASE);
Endpoint_Write_Byte(ReturnStatus);
Endpoint_ClearIN();
Endpoint_ClearIN();
}
/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
@ -291,7 +291,7 @@ static void XPROGProtocol_WriteMemory(void)
uint16_t Length;
uint8_t ProgData[256];
} WriteMemory_XPROG_Params;
Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
sizeof(WriteMemory_XPROG_Params).ProgData), NO_STREAM_CALLBACK);
WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
@ -309,7 +309,7 @@ static void XPROGProtocol_WriteMemory(void)
uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
bool PagedMemory = true;
switch (WriteMemory_XPROG_Params.MemoryType)
{
case XPRG_MEM_TYPE_APPL:
@ -321,7 +321,7 @@ static void XPROGProtocol_WriteMemory(void)
case XPRG_MEM_TYPE_EEPROM:
WriteCommand = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE;
WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
break;
case XPRG_MEM_TYPE_USERSIG:
WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG;
@ -335,9 +335,9 @@ static void XPROGProtocol_WriteMemory(void)
PagedMemory = false;
break;
}
/* Send the appropriate memory write commands to the device, indicate timeout if occurred */
if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) ||
(!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
@ -355,10 +355,10 @@ static void XPROGProtocol_WriteMemory(void)
ReturnStatus = XPRG_ERR_TIMEOUT;
}
}
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
Endpoint_Write_Byte(ReturnStatus);
Endpoint_Write_Byte(ReturnStatus);
Endpoint_ClearIN();
}
@ -375,7 +375,7 @@ static void XPROGProtocol_ReadMemory(void)
uint32_t Address;
uint16_t Length;
} ReadMemory_XPROG_Params;
Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NO_STREAM_CALLBACK);
ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length);
@ -385,7 +385,7 @@ static void XPROGProtocol_ReadMemory(void)
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ReadBuffer[256];
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
{
/* Read the PDI target's memory, indicate timeout if occurred */
@ -402,10 +402,10 @@ static void XPROGProtocol_ReadMemory(void)
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
Endpoint_Write_Byte(ReturnStatus);
if (ReturnStatus == XPRG_ERR_OK)
Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NO_STREAM_CALLBACK);
Endpoint_ClearIN();
}
@ -415,18 +415,18 @@ static void XPROGProtocol_ReadMemory(void)
static void XPROGProtocol_ReadCRC(void)
{
uint8_t ReturnStatus = XPRG_ERR_OK;
struct
{
uint8_t CRCType;
} ReadCRC_XPROG_Params;
Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NO_STREAM_CALLBACK);
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint32_t MemoryCRC;
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
@ -446,7 +446,7 @@ static void XPROGProtocol_ReadCRC(void)
CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
break;
}
/* Perform and retrieve the memory CRC, indicate timeout if occurred */
if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
ReturnStatus = XPRG_ERR_TIMEOUT;
@ -456,18 +456,18 @@ static void XPROGProtocol_ReadCRC(void)
/* TPI does not support memory CRC */
ReturnStatus = XPRG_ERR_FAILED;
}
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_CRC);
Endpoint_Write_Byte(ReturnStatus);
if (ReturnStatus == XPRG_ERR_OK)
{
Endpoint_Write_Byte(MemoryCRC >> 16);
Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
}
Endpoint_ClearIN();
Endpoint_ClearIN();
}
/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
@ -478,7 +478,7 @@ static void XPROGProtocol_SetParam(void)
uint8_t ReturnStatus = XPRG_ERR_OK;
uint8_t XPROGParam = Endpoint_Read_Byte();
/* Determine which parameter is being set, store the new parameter value */
switch (XPROGParam)
{
@ -502,7 +502,7 @@ static void XPROGProtocol_SetParam(void)
Endpoint_ClearOUT();
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);
Endpoint_Write_Byte(ReturnStatus);
@ -510,3 +510,4 @@ static void XPROGProtocol_SetParam(void)
}
#endif

33
Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -40,10 +40,10 @@
#include <avr/io.h>
#include <util/delay.h>
#include <stdio.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include "../V2Protocol.h"
#include "XPROGTarget.h"
#include "XMEGANVM.h"
@ -52,12 +52,12 @@
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
#endif
/* Macros: */
#define XPRG_CMD_ENTER_PROGMODE 0x01
#define XPRG_CMD_LEAVE_PROGMODE 0x02
@ -100,25 +100,25 @@
#define XPRG_PARAM_EEPPAGESIZE 0x02
#define XPRG_PARAM_NVMCMD_REG 0x03
#define XPRG_PARAM_NVMCSR_REG 0x04
#define XPRG_PROTOCOL_PDI 0x00
#define XPRG_PROTOCOL_JTAG 0x01
#define XPRG_PROTOCOL_TPI 0x02
#define XPRG_PAGEMODE_WRITE (1 << 1)
#define XPRG_PAGEMODE_ERASE (1 << 0)
/* External Variables: */
extern uint32_t XPROG_Param_NVMBase;
extern uint16_t XPROG_Param_EEPageSize;
extern uint8_t XPROG_Param_NVMCSRRegAddr;
extern uint8_t XPROG_Param_NVMCMDRegAddr;
extern uint8_t XPROG_SelectedProtocol;
/* Function Prototypes: */
void XPROGProtocol_SetMode(void);
void XPROGProtocol_Command(void);
#if (defined(INCLUDE_FROM_XPROGPROTOCOL_C) && defined(ENABLE_XPROG_PROTOCOL))
static void XPROGProtocol_EnterXPROGMode(void);
static void XPROGProtocol_LeaveXPROGMode(void);
@ -128,5 +128,6 @@
static void XPROGProtocol_ReadMemory(void);
static void XPROGProtocol_ReadCRC(void);
#endif
#endif

21
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -49,11 +49,11 @@ void XPROGTarget_EnableTargetPDI(void)
/* Set Tx and XCK as outputs, Rx as input */
DDRD |= (1 << 5) | (1 << 3);
DDRD &= ~(1 << 2);
/* Set DATA line high for at least 90ns to disable /RESET functionality */
PORTD |= (1 << 3);
_delay_us(1);
/* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
UBRR1 = (F_CPU / XPROG_HARDWARE_SPEED);
UCSR1B = (1 << TXEN1);
@ -77,7 +77,7 @@ void XPROGTarget_EnableTargetTPI(void)
/* Set Tx and XCK as outputs, Rx as input */
DDRD |= (1 << 5) | (1 << 3);
DDRD &= ~(1 << 2);
/* Set up the synchronous USART for TINY communications - 8 data bits, even parity, 2 stop bits */
UBRR1 = (F_CPU / XPROG_HARDWARE_SPEED);
UCSR1B = (1 << TXEN1);
@ -133,7 +133,7 @@ void XPROGTarget_SendByte(const uint8_t Byte)
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
XPROGTarget_SetTxMode();
/* Wait until there is space in the hardware Tx buffer before writing */
while (!(UCSR1A & (1 << UDRE1)));
UCSR1A |= (1 << TXC1);
@ -202,3 +202,4 @@ static void XPROGTarget_SetRxMode(void)
}
#endif

37
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -40,27 +40,27 @@
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <LUFA/Common/Common.h>
#include "../V2Protocol.h"
#include "XPROGProtocol.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
#endif
/** Serial carrier TPI/PDI speed when hardware TPI/PDI mode is used. */
#define XPROG_HARDWARE_SPEED 500000
/** Total number of bits in a single USART frame. */
#define BITS_IN_USART_FRAME 12
#define PDI_CMD_LDS 0x00
#define PDI_CMD_LD 0x20
#define PDI_CMD_STS 0x40
@ -69,11 +69,11 @@
#define PDI_CMD_REPEAT 0xA0
#define PDI_CMD_STCS 0xC0
#define PDI_CMD_KEY 0xE0
#define PDI_STATUS_REG 0
#define PDI_RESET_REG 1
#define PDI_CTRL_REG 2
#define PDI_STATUS_NVM (1 << 1)
#define PDI_RESET_KEY 0x59
@ -83,7 +83,7 @@
#define PDI_DATSIZE_2BYTES 1
#define PDI_DATSIZE_3BYTES 2
#define PDI_DATSIZE_4BYTES 3
#define PDI_POINTER_INDIRECT 0
#define PDI_POINTER_INDIRECT_PI 1
#define PDI_POINTER_DIRECT 2
@ -100,14 +100,14 @@
#define TPI_STATUS_REG 0x00
#define TPI_CTRL_REG 0x02
#define TPI_ID_REG 0x0F
#define TPI_STATUS_NVM (1 << 1)
#define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
#define TPI_POINTER_INDIRECT 0
#define TPI_POINTER_INDIRECT_PI 4
/* Function Prototypes: */
void XPROGTarget_EnableTargetPDI(void);
void XPROGTarget_EnableTargetTPI(void);
@ -117,10 +117,11 @@
uint8_t XPROGTarget_ReceiveByte(void);
void XPROGTarget_SendBreak(void);
bool XPROGTarget_WaitWhileNVMBusBusy(void);
#if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL))
static void XPROGTarget_SetTxMode(void);
static void XPROGTarget_SetRxMode(void);
#endif
#endif

49
Projects/AVRISP-MKII/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -158,7 +158,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -171,7 +171,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -285,7 +285,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -298,7 +298,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -310,7 +310,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -322,7 +322,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -345,7 +345,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -379,7 +379,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -413,7 +413,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -442,7 +442,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -461,10 +461,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -529,11 +529,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -560,9 +560,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -660,14 +660,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -689,7 +689,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -733,3 +733,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

49
Projects/Benito/Benito.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -60,7 +60,7 @@ uint8_t FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
*/
USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
{
.Config =
.Config =
{
.ControlInterfaceNumber = 0,
@ -84,9 +84,9 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
int main(void)
{
SetupHardware();
RingBuffer_InitBuffer(&Tx_Buffer);
sei();
for (;;)
@ -98,9 +98,9 @@ int main(void)
UDR1 = ReceivedByte;
LEDs_TurnOnLEDs(LEDMASK_TX);
PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;
PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;
}
/* Check if the millisecond timer has elapsed */
if (TIFR0 & (1 << OCF0A))
{
@ -110,14 +110,14 @@ int main(void)
LEDs_TurnOffLEDs(LEDMASK_BUSY);
AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
}
/* Check if the LEDs should be ping-ponging (during enumeration) */
if (PulseMSRemaining.PingPongLEDPulse && !(--PulseMSRemaining.PingPongLEDPulse))
{
LEDs_ToggleLEDs(LEDMASK_TX | LEDMASK_RX);
PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS;
}
/* Turn off TX LED(s) once the TX pulse period has elapsed */
if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse))
LEDs_TurnOffLEDs(LEDMASK_TX);
@ -139,14 +139,14 @@ int main(void)
LEDs_TurnOnLEDs(LEDMASK_RX);
PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;
}
FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
}
/* Clear the millisecond timer CTC flag (cleared by writing logic one to the register) */
TIFR0 |= (1 << OCF0A);
TIFR0 |= (1 << OCF0A);
}
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
USB_USBTask();
}
@ -167,7 +167,7 @@ void SetupHardware(void)
OCR0A = (F_CPU / 64 / 1000);
TCCR0A = (1 << WGM01);
TCCR0B = ((1 << CS01) | (1 << CS00));
/* Tristate target /RESET Line */
AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
@ -216,10 +216,10 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
{
case CDC_PARITY_Odd:
ConfigMask = ((1 << UPM11) | (1 << UPM10));
ConfigMask = ((1 << UPM11) | (1 << UPM10));
break;
case CDC_PARITY_Even:
ConfigMask = (1 << UPM11);
ConfigMask = (1 << UPM11);
break;
}
@ -238,7 +238,7 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
break;
}
/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
UCSR1B = 0;
UCSR1A = 0;
@ -246,10 +246,10 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
/* Set the new baud rate before configuring the USART */
UBRR1 = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
UCSR1C = ConfigMask;
UCSR1A = (1 << U2X1);
UCSR1A = (1 << U2X1);
UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
}
@ -276,10 +276,11 @@ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const C
if (!(PreviousDTRState) && CurrentDTRState)
{
LEDs_SetAllLEDs(LEDMASK_BUSY);
AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK;
PulseMSRemaining.ResetPulse = AVR_RESET_PULSE_MS;
}
PreviousDTRState = CurrentDTRState;
}

21
Projects/Benito/Benito.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -56,10 +56,10 @@
/** LED mask for the library LED driver, to indicate RX activity. */
#define LEDMASK_RX LEDS_LED2
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_ERROR (LEDS_LED1 | LEDS_LED2)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2)
@ -70,8 +70,9 @@
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_UnhandledControlRequest(void);
void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
#endif

7
Projects/Benito/Benito.txt
View file

@ -3,7 +3,7 @@
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Benito Arduino Programmer Project
*
* \section SSec_Compat Project Compatibility:
@ -28,7 +28,7 @@
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Abstract Control Model (ACM)</td>
* </tr>
@ -43,7 +43,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section SSec_Description Project Description:
*
* Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This
* project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse
@ -103,3 +103,4 @@
* </tr>
* </table>
*/

103
Projects/Benito/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -30,9 +30,9 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
@ -45,22 +45,22 @@
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x02,
.SubClass = 0x00,
.Protocol = 0x00,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2060,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
@ -71,102 +71,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.CDC_CCI_Interface =
.CDC_CCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_Functional_Header =
.CDC_Functional_Header =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_Header,
.CDCSpecification = VERSION_BCD(01.10),
},
.CDC_Functional_ACM =
.CDC_Functional_ACM =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_ACM,
.Capabilities = 0x06,
},
.CDC_Functional_Union =
.CDC_Functional_Union =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_Union,
.MasterInterfaceNumber = 0,
.SlaveInterfaceNumber = 1,
},
.CDC_NotificationEndpoint =
.CDC_NotificationEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
.CDC_DCI_Interface =
.CDC_DCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 1,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_DataOutEndpoint =
.CDC_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
.CDC_DataInEndpoint =
.CDC_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
@ -181,7 +181,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
@ -192,7 +192,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
@ -203,7 +203,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(25), .Type = DTYPE_String},
.UnicodeString = L"Benito Arduino Programmer"
};
@ -225,34 +225,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
switch (DescriptorType)
{
case DTYPE_Device:
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

19
Projects/Benito/Descriptors.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,7 +32,7 @@
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
@ -47,10 +47,10 @@
#define CDC_NOTIFICATION_EPNUM 2
/** Endpoint number of the CDC device-to-host data IN endpoint. */
#define CDC_TX_EPNUM 3
#define CDC_TX_EPNUM 3
/** Endpoint number of the CDC host-to-device data OUT endpoint. */
#define CDC_RX_EPNUM 4
#define CDC_RX_EPNUM 4
/** Size in bytes of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPSIZE 8
@ -83,3 +83,4 @@
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

39
Projects/Benito/Lib/LightweightRingBuff.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -39,20 +39,20 @@
* or deletions) must not overlap. If there is possibility of two or more of the same kind of
* operating occuring at the same point in time, atomic (mutex) locking should be used.
*/
#ifndef _ULW_RING_BUFF_H_
#define _ULW_RING_BUFF_H_
/* Includes: */
#include <util/atomic.h>
#include <stdint.h>
#include <stdbool.h>
/* Defines: */
/** Size of each ring buffer, in data elements - must be between 1 and 255. */
#define BUFFER_SIZE 255
/** Type of data to store into the buffer. */
#define RingBuff_Data_t uint8_t
@ -76,7 +76,7 @@
RingBuff_Data_t* Out; /**< Current retrieval location in the circular buffer */
RingBuff_Count_t Count;
} RingBuff_t;
/* Inline Functions: */
/** Initializes a ring buffer ready for use. Buffers must be initialized via this function
* before any operations are called upon them. Already initialized buffers may be reset
@ -92,7 +92,7 @@
Buffer->Out = Buffer->Buffer;
}
}
/** Retrieves the minimum number of bytes stored in a particular buffer. This value is computed
* by entering an atomic lock on the buffer while the IN and OUT locations are fetched, so that
* the buffer cannot be modified while the computation takes place. This value should be cached
@ -109,15 +109,15 @@
static inline RingBuff_Count_t RingBuffer_GetCount(RingBuff_t* const Buffer)
{
RingBuff_Count_t Count;
ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
{
Count = Buffer->Count;
}
return Count;
}
/** Atomically determines if the specified ring buffer contains any free space. This should
* be tested before storing data to the buffer, to ensure that no data is lost due to a
* buffer overrun.
@ -125,7 +125,7 @@
* \param[in,out] Buffer Pointer to a ring buffer structure to insert into
*
* \return Boolean true if the buffer contains no free space, false otherwise
*/
*/
static inline bool RingBuffer_IsFull(RingBuff_t* const Buffer)
{
return (RingBuffer_GetCount(Buffer) == BUFFER_SIZE);
@ -142,7 +142,7 @@
* \param[in,out] Buffer Pointer to a ring buffer structure to insert into
*
* \return Boolean true if the buffer contains no free space, false otherwise
*/
*/
static inline bool RingBuffer_IsEmpty(RingBuff_t* const Buffer)
{
return (RingBuffer_GetCount(Buffer) == 0);
@ -161,7 +161,7 @@
const RingBuff_Data_t Data)
{
*Buffer->In = Data;
if (++Buffer->In == &Buffer->Buffer[BUFFER_SIZE])
Buffer->In = Buffer->Buffer;
@ -184,7 +184,7 @@
static inline RingBuff_Data_t RingBuffer_Remove(RingBuff_t* const Buffer)
{
RingBuff_Data_t Data = *Buffer->Out;
if (++Buffer->Out == &Buffer->Buffer[BUFFER_SIZE])
Buffer->Out = Buffer->Buffer;
@ -192,8 +192,9 @@
{
Buffer->Count--;
}
return Data;
}
#endif

49
Projects/Benito/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = atmega32u2
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = BENITO
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -144,7 +144,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -157,7 +157,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -271,7 +271,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -284,7 +284,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -296,7 +296,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -308,7 +308,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -331,7 +331,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -365,7 +365,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -399,7 +399,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -428,7 +428,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -447,10 +447,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -515,11 +515,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -546,9 +546,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -646,14 +646,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -675,7 +675,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -719,3 +719,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

69
Projects/Incomplete/StandaloneProgrammer/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -30,9 +30,9 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
@ -59,22 +59,22 @@
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0xEF,
.SubClass = 0x02,
.Protocol = 0x01,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2063,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
@ -85,38 +85,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.MS_Interface =
.MS_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x08,
.SubClass = 0x06,
.Protocol = 0x50,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.MS_DataInEndpoint =
.MS_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
@ -126,7 +126,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.PollingIntervalMS = 0x00
},
.MS_DataOutEndpoint =
.MS_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
@ -144,7 +144,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
@ -155,7 +155,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
@ -166,7 +166,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(26), .Type = DTYPE_String},
.UnicodeString = L"LUFA Standalone Programmer"
};
@ -188,36 +188,37 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
switch (DescriptorType)
{
case DTYPE_Device:
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}
#endif

25
Projects/Incomplete/StandaloneProgrammer/Descriptors.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,7 +32,7 @@
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
@ -60,15 +60,15 @@
#define CDC_TXRX_EPSIZE 16
/** Endpoint number of the Mass Storage device-to-host data IN endpoint. */
#define MASS_STORAGE_IN_EPNUM 3
#define MASS_STORAGE_IN_EPNUM 3
/** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */
#define MASS_STORAGE_OUT_EPNUM 4
#define MASS_STORAGE_OUT_EPNUM 4
/** Size in bytes of the Mass Storage data endpoints. */
#define MASS_STORAGE_IO_EPSIZE 64
/* Type Defines: */
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
@ -80,7 +80,7 @@
USB_Descriptor_Endpoint_t MS_DataInEndpoint;
USB_Descriptor_Endpoint_t MS_DataOutEndpoint;
} USB_Descriptor_Configuration_t;
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
@ -88,3 +88,4 @@
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

17
Projects/Incomplete/StandaloneProgrammer/DiskDevice.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -93,11 +93,12 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
{
bool CommandSuccess;
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
LEDs_SetAllLEDs(LEDMASK_USB_READY);
return CommandSuccess;
}
#endif

15
Projects/Incomplete/StandaloneProgrammer/DiskDevice.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -38,7 +38,7 @@
/* Includes: */
#include <avr/io.h>
#include "Descriptors.h"
#include "StandaloneProgrammer.h"
@ -59,3 +59,4 @@
#endif
#endif

35
Projects/Incomplete/StandaloneProgrammer/DiskHost.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -41,7 +41,7 @@ USB_ClassInfo_MS_Host_t DiskHost_MS_Interface =
{
.DataINPipeNumber = 1,
.DataINPipeDoubleBank = false,
.DataOUTPipeNumber = 2,
.DataOUTPipeDoubleBank = false,
},
@ -52,7 +52,7 @@ void DiskHost_USBTask(void)
if (USB_HostState == HOST_STATE_Addressed)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
@ -71,14 +71,14 @@ void DiskHost_USBTask(void)
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
return;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
return;
}
uint8_t MaxLUNIndex;
if (MS_Host_GetMaxLUN(&DiskHost_MS_Interface, &MaxLUNIndex))
{
@ -86,17 +86,17 @@ void DiskHost_USBTask(void)
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
return;
}
if (MS_Host_ResetMSInterface(&DiskHost_MS_Interface))
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
return;
}
USB_HostState = HOST_STATE_Configured;
/* Note: For the RequestSense call to work, the host state machine must be in the
/* Note: For the RequestSense call to work, the host state machine must be in the
* Configured state, or the call will be aborted */
SCSI_Request_Sense_Response_t SenseData;
if (MS_Host_RequestSense(&DiskHost_MS_Interface, 0, &SenseData) != 0)
@ -105,13 +105,13 @@ void DiskHost_USBTask(void)
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
return;
}
pf_mount(&DiskFATState);
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
MS_Host_USBTask(&DiskHost_MS_Interface);
MS_Host_USBTask(&DiskHost_MS_Interface);
}
void EVENT_USB_Host_DeviceAttached(void)
@ -125,3 +125,4 @@ void EVENT_USB_Host_DeviceUnattached(void)
}
#endif

17
Projects/Incomplete/StandaloneProgrammer/DiskHost.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -38,7 +38,7 @@
/* Includes: */
#include <avr/io.h>
#include "Descriptors.h"
#include "StandaloneProgrammer.h"
@ -54,9 +54,10 @@
/* Function Prototypes: */
#if defined(USB_CAN_BE_HOST)
void DiskHost_USBTask(void);
void EVENT_USB_Host_DeviceAttached(void);
void EVENT_USB_Host_DeviceUnattached(void);
#endif
#endif

81
Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -78,7 +78,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -87,7 +87,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
{
/* Clear the current endpoint bank */
Endpoint_ClearOUT();
/* Wait until the host has sent another packet */
if (Endpoint_WaitUntilReady())
return;
@ -126,7 +126,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
/* Send the Dataflash buffer write command */
Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, 0);
Dataflash_SendAddressBytes(0, 0);
}
/* Write one 16-byte chunk of data to the Dataflash */
@ -146,7 +146,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
@ -155,9 +155,9 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
/* Check if the current command is being aborted by the host */
if (MSInterfaceInfo->State.IsMassStoreReset)
return;
return;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
TotalBlocks--;
}
@ -202,15 +202,15 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
/* Wait until endpoint is ready before continuing */
if (Endpoint_WaitUntilReady())
return;
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -219,12 +219,12 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
{
/* Clear the endpoint bank to send its contents to the host */
Endpoint_ClearIN();
/* Wait until the endpoint is ready for more data */
if (Endpoint_WaitUntilReady())
return;
}
/* Check if end of Dataflash page reached */
if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
{
@ -234,7 +234,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
/* Select the next Dataflash chip based on the new Dataflash page index */
Dataflash_SelectChipFromPage(CurrDFPage);
/* Send the Dataflash main memory page read command */
Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
Dataflash_SendAddressBytes(CurrDFPage, 0);
@ -242,7 +242,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
}
}
/* Read one 16-byte chunk of data from the Dataflash */
Endpoint_Write_Byte(Dataflash_ReceiveByte());
@ -261,10 +261,10 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
/* Increment the block 16 byte block counter */
BytesInBlockDiv16++;
@ -272,11 +272,11 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
if (MSInterfaceInfo->State.IsMassStoreReset)
return;
}
/* Decrement the blocks remaining counter */
TotalBlocks--;
}
/* If the endpoint is full, send its contents to the host */
if (!(Endpoint_IsReadWriteAllowed()))
Endpoint_ClearIN();
@ -316,11 +316,11 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
/* Send the Dataflash buffer write command */
Dataflash_SendByte(DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, CurrDFPageByte);
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -360,18 +360,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
Dataflash_SendByte(DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, 0);
}
/* Write one 16-byte chunk of data to the Dataflash */
for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
Dataflash_SendByte(*(BufferPtr++));
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
/* Increment the block 16 byte block counter */
BytesInBlockDiv16++;
BytesInBlockDiv16++;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
TotalBlocks--;
}
@ -417,7 +417,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -430,7 +430,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
/* Select the next Dataflash chip based on the new Dataflash page index */
Dataflash_SelectChipFromPage(CurrDFPage);
/* Send the Dataflash main memory page read command */
Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
Dataflash_SendAddressBytes(CurrDFPage, 0);
@ -438,19 +438,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
}
}
/* Read one 16-byte chunk of data from the Dataflash */
for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
*(BufferPtr++) = Dataflash_ReceiveByte();
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
/* Increment the block 16 byte block counter */
BytesInBlockDiv16++;
}
/* Decrement the blocks remaining counter */
TotalBlocks--;
}
@ -465,7 +465,7 @@ void DataflashManager_ResetDataflashProtections(void)
/* Select first Dataflash chip, send the read status register command */
Dataflash_SelectChip(DATAFLASH_CHIP1);
Dataflash_SendByte(DF_CMD_GETSTATUS);
/* Check if sector protection is enabled */
if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
{
@ -477,12 +477,12 @@ void DataflashManager_ResetDataflashProtections(void)
Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
}
/* Select second Dataflash chip (if present on selected board), send read status register command */
#if (DATAFLASH_TOTALCHIPS == 2)
Dataflash_SelectChip(DATAFLASH_CHIP2);
Dataflash_SendByte(DF_CMD_GETSTATUS);
/* Check if sector protection is enabled */
if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
{
@ -495,7 +495,7 @@ void DataflashManager_ResetDataflashProtections(void)
Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
}
#endif
/* Deselect current Dataflash chip */
Dataflash_DeselectChip();
}
@ -529,7 +529,8 @@ bool DataflashManager_CheckDataflashOperation(void)
if (ReturnByte != DF_MANUFACTURER_ATMEL)
return false;
#endif
return true;
}
#endif

21
Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,13 +32,13 @@
*
* Header file for DataflashManager.c.
*/
#ifndef _DATAFLASH_MANAGER_H_
#define _DATAFLASH_MANAGER_H_
/* Includes: */
#include <avr/io.h>
#include "StandaloneProgrammer.h"
#include "Descriptors.h"
@ -59,12 +59,12 @@
* storage media (Dataflash) using a different native block size. Do not change this value.
*/
#define VIRTUAL_MEMORY_BLOCK_SIZE 512
/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
* change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
*/
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
/* Function Prototypes: */
#if defined(USB_CAN_BE_DEVICE)
void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
@ -84,3 +84,4 @@
#endif
#endif

1
Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt
View file

@ -34,3 +34,4 @@ AGREEMENTS
REVISION HISTORY
Jun 15, 2010 R0.01a First release (Branched from FatFs R0.07b)

1
Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h
View file

@ -34,3 +34,4 @@ BOOL assign_drives (int argc, char *argv[]);
#define _DISKIO
#endif

1
Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h
View file

@ -35,3 +35,4 @@ typedef enum { FALSE = 0, TRUE } BOOL;
#define _INTEGER
#endif

2
Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c
View file

@ -400,7 +400,7 @@ FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */
}
dj->sclust =
#if _FS_FAT32
((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) |
((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) |
#endif
LD_WORD(dir+DIR_FstClusLO);
}

1
Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h
View file

@ -235,3 +235,4 @@ FRESULT pf_readdir (DIR*, FILINFO*); /* Read a directory item */
#endif /* _FATFS */

25
Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -34,7 +34,7 @@ struct
{
uint16_t SigBytes[4];
bool EnforceSigBytes;
uint32_t ProgrammingSpeed;
} ProgrammerConfig;
@ -47,14 +47,14 @@ bool ProgrammerConfig_ProcessConfiguration(void)
puts(" >> ERROR: CONF.txt File Not Found.\r\n");
return false;
}
char LineBuff[100];
char* CurrentLine;
do
{
CurrentLine = fgets(LineBuff, sizeof(LineBuff), &DiskStream);
if (CurrentLine)
{
sscanf(CurrentLine, "SIGNATURE = %02x %02x %02x %02x", &ProgrammerConfig.SigBytes[0],
@ -65,13 +65,14 @@ bool ProgrammerConfig_ProcessConfiguration(void)
sscanf(CurrentLine, "SPEED = %lu", &ProgrammerConfig.ProgrammingSpeed);
}
} while (CurrentLine);
printf(" >> *** Configuration: ***\r\n");
printf(" >> Device Signature: 0x%02x 0x%02x 0x%02x 0x%02x\r\n", ProgrammerConfig.SigBytes[0],
ProgrammerConfig.SigBytes[1],
ProgrammerConfig.SigBytes[2],
ProgrammerConfig.SigBytes[3]);
printf(" >> Programming Speed: %lu Hz\r\n", ProgrammerConfig.ProgrammingSpeed);
return true;
}

15
Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -35,10 +35,11 @@
#include <stdio.h>
#include <string.h>
#include <stdbool.h>
#include "../StandaloneProgrammer.h"
/* Function Prototypes: */
bool ProgrammerConfig_ProcessConfiguration(void);
#endif

63
Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -34,7 +34,7 @@
* devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
* which wrap around standard SCSI device commands for controlling the actual storage medium.
*/
#define INCLUDE_FROM_SCSI_C
#include "SCSI.h"
@ -42,22 +42,22 @@
/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
* features and capabilities.
*/
SCSI_Inquiry_Response_t InquiryData =
SCSI_Inquiry_Response_t InquiryData =
{
.DeviceType = DEVICE_TYPE_BLOCK,
.PeripheralQualifier = 0,
.Removable = true,
.Version = 0,
.ResponseDataFormat = 2,
.NormACA = false,
.TrmTsk = false,
.AERC = false,
.AdditionalLength = 0x1F,
.SoftReset = false,
.CmdQue = false,
.Linked = false,
@ -65,7 +65,7 @@ SCSI_Inquiry_Response_t InquiryData =
.WideBus16Bit = false,
.WideBus32Bit = false,
.RelAddr = false,
.VendorID = "LUFA",
.ProductID = "Dataflash Disk",
.RevisionID = {'0','.','0','0'},
@ -97,13 +97,13 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
{
case SCSI_CMD_INQUIRY:
CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
break;
case SCSI_CMD_REQUEST_SENSE:
CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
break;
case SCSI_CMD_READ_CAPACITY_10:
CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
break;
case SCSI_CMD_SEND_DIAGNOSTIC:
CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
@ -135,7 +135,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
SCSI_ASENSEQ_NO_QUALIFIER);
return true;
}
@ -166,11 +166,11 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
return false;
}
Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK);
uint8_t PadBytes[AllocationLength - BytesTransferred];
/* Pad out remaining bytes with 0x00 */
Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK);
@ -179,7 +179,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
/* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
return true;
}
@ -194,7 +194,7 @@ static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterf
{
uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);
uint8_t PadBytes[AllocationLength - BytesTransferred];
Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK);
@ -222,10 +222,10 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt
Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK);
Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK);
Endpoint_ClearIN();
/* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
return true;
}
@ -249,21 +249,21 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte
return false;
}
/* Check to see if all attached Dataflash ICs are functional */
if (!(DataflashManager_CheckDataflashOperation()))
{
/* Update SENSE key with a hardware error condition and return command fail */
SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
SCSI_ASENSEQ_NO_QUALIFIER);
SCSI_ASENSEQ_NO_QUALIFIER);
return false;
}
/* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
return true;
}
@ -281,13 +281,13 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
{
uint32_t BlockAddress;
uint16_t TotalBlocks;
/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
/* Check if the block address is outside the maximum allowable value for the LUN */
if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS)
{
@ -298,7 +298,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
return false;
}
/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
if (IsDataRead == DATA_READ)
DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
@ -307,7 +307,8 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
/* Update the bytes transferred counter and succeed the command */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
return true;
}
#endif

25
Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,7 +32,7 @@
*
* Header file for SCSI.c.
*/
#ifndef _SCSI_H_
#define _SCSI_H_
@ -46,7 +46,7 @@
#include "StandaloneProgrammer.h"
#include "Descriptors.h"
#include "DataflashManager.h"
/* Macros: */
/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
* is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
@ -68,14 +68,14 @@
/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
#define DEVICE_TYPE_BLOCK 0x00
/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
#define DEVICE_TYPE_CDROM 0x05
/* Function Prototypes: */
#if defined(USB_CAN_BE_DEVICE)
bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
#if defined(INCLUDE_FROM_SCSI_C)
static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
@ -85,5 +85,6 @@
const bool IsDataRead);
#endif
#endif
#endif

21
Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -67,7 +67,7 @@ void EVENT_USB_UIDChange(void)
}
#endif
/** Task to determine if the user is wishes to start the programming sequence, and if so executes the
/** Task to determine if the user is wishes to start the programming sequence, and if so executes the
* required functions to program the attached target (if any) with the files loaded to the Dataflash.
*/
void Programmer_Task(void)
@ -80,7 +80,7 @@ void Programmer_Task(void)
HasAttempted = true;
else
return;
puts("==== PROGRAMMING CYCLE STARTED ====\r\n");
#if defined(USB_CAN_BE_BOTH)
@ -113,7 +113,7 @@ int main(void)
for (;;)
{
Programmer_Task();
if (USB_CurrentMode == USB_MODE_HOST)
{
#if defined(USB_CAN_BE_HOST)
@ -126,7 +126,7 @@ int main(void)
DiskDevice_USBTask();
#endif
}
USB_USBTask();
}
}
@ -159,3 +159,4 @@ void SetupHardware(void)
DataflashManager_ResetDataflashProtections();
#endif
}

23
Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -70,19 +70,20 @@
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
/* External Variables: */
extern FILE DiskStream;
extern FATFS DiskFATState;
/* Function Prototypes: */
#if defined(INCLUDE_FROM_STANDALONEPROG_C)
static int Disk_getchar(FILE* Stream);
#endif
void EVENT_USB_UIDChange(void);
void SetupHardware(void);
void Programmer_Task(void);
#endif

49
Projects/Incomplete/StandaloneProgrammer/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -144,7 +144,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -157,7 +157,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -271,7 +271,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -284,7 +284,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -296,7 +296,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -308,7 +308,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -331,7 +331,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -365,7 +365,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -399,7 +399,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -428,7 +428,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -447,10 +447,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -515,11 +515,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -546,9 +546,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -646,14 +646,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -675,7 +675,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -719,3 +719,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

85
Projects/LEDNotifier/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -30,9 +30,9 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
@ -83,102 +83,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.CDC_CCI_Interface =
.CDC_CCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_Functional_Header =
.CDC_Functional_Header =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_Header,
.CDCSpecification = VERSION_BCD(01.10),
},
.CDC_Functional_ACM =
.CDC_Functional_ACM =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_ACM,
.Capabilities = 0x06,
},
.CDC_Functional_Union =
.CDC_Functional_Union =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_Union,
.MasterInterfaceNumber = 0,
.SlaveInterfaceNumber = 1,
},
.CDC_NotificationEndpoint =
.CDC_NotificationEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
.CDC_DCI_Interface =
.CDC_DCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 1,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_DataOutEndpoint =
.CDC_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
.CDC_DataInEndpoint =
.CDC_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
@ -241,30 +241,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

15
Projects/LEDNotifier/Descriptors.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,7 +32,7 @@
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
@ -83,3 +83,4 @@
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

29
Projects/LEDNotifier/LEDNotifier.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -33,7 +33,7 @@
* Main source file for the LEDNotfier project. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "LEDNotifier.h"
/** LUFA CDC Class driver interface configuration and state information. This structure is
@ -89,7 +89,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
if (SoftPWM_Count >= SoftPWM_Channel3_Duty)
LEDMask &= ~LEDS_LED3;
LEDs_SetAllLEDs(LEDMask);
}
@ -104,24 +104,24 @@ static FILE USBSerialStream;
int main(void)
{
SetupHardware();
/* Create a regular blocking character stream for the interface so that it can be used with the stdio.h functions */
CDC_Device_CreateBlockingStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
sei();
for (;;)
{
/* Read in next LED colour command from the host */
uint8_t ColourUpdate = fgetc(&USBSerialStream);
/* Top 3 bits select the LED, bottom 5 control the brightness */
uint8_t Channel = (ColourUpdate & 0b11100000);
uint8_t Duty = (ColourUpdate & 0b00011111);
if (Channel & (1 << 5))
SoftPWM_Channel1_Duty = Duty;
if (Channel & (1 << 6))
SoftPWM_Channel2_Duty = Duty;
@ -146,7 +146,7 @@ void SetupHardware(void)
/* Hardware Initialization */
LEDs_Init();
USB_Init();
/* Timer Initialization */
OCR0A = 100;
TCCR0A = (1 << WGM01);
@ -165,3 +165,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
{
CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
}

17
Projects/LEDNotifier/LEDNotifier.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -50,11 +50,12 @@
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/CDC.h>
/* Function Prototypes: */
void SetupHardware(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_UnhandledControlRequest(void);
#endif

7
Projects/LEDNotifier/LEDNotifier.txt
View file

@ -3,7 +3,7 @@
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage USB LED Notifier Project
*
* \section SSec_Compat Demo Compatibility:
@ -25,7 +25,7 @@
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Abstract Control Model (ACM)</td>
* </tr>
@ -39,7 +39,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section SSec_Description Project Description:
*
* USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any
* USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the
@ -60,3 +60,4 @@
* </tr>
* </table>
*/

49
Projects/LEDNotifier/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = BUI
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -135,7 +135,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -148,7 +148,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -299,7 +299,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -322,7 +322,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -419,7 +419,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -506,11 +506,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -637,14 +637,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

69
Projects/Magstripe/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -10,13 +10,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -31,11 +31,11 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/** HID report descriptor. This is a HID class specific descriptor, which defines the structure of the
@ -79,22 +79,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2042,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
@ -105,49 +105,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.HID_Interface =
.HID_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = 0x03,
.SubClass = 0x01,
.Protocol = 0x01,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.HID_KeyboardHID =
{
.HID_KeyboardHID =
{
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(KeyboardReport)
},
.HID_ReportINEndpoint =
.HID_ReportINEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
@ -160,11 +160,11 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors. */
* via the language ID table available at USB.org what languages the device supports for its string descriptors. */
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
@ -175,7 +175,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(32), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera and Denver Gingerich"
};
@ -186,7 +186,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(20), .Type = DTYPE_String},
.UnicodeString = L"Magnetic Card Reader"
};
@ -232,7 +232,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
case HID_DTYPE_HID:
Address = &ConfigurationDescriptor.HID_KeyboardHID;
@ -243,7 +243,8 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
Size = sizeof(KeyboardReport);
break;
}
*DescriptorAddress = Address;
return Size;
}

17
Projects/Magstripe/Descriptors.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -10,13 +10,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -55,11 +55,11 @@
USB_HID_Descriptor_HID_t HID_KeyboardHID; /**< Keyboard HID descriptor */
USB_Descriptor_Endpoint_t HID_ReportINEndpoint; /**< Keyboard key report endpoint descriptor */
} USB_Descriptor_Configuration_t;
/* Macros: */
/** Endpoint number of the keyboard key press reporting endpoint. */
#define KEYBOARD_EPNUM 1
/** Size of the keyboard report endpoints, in bytes. */
#define KEYBOARD_EPSIZE 8
@ -70,3 +70,4 @@
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

35
Projects/Magstripe/Lib/CircularBitBuffer.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -10,13 +10,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -41,7 +41,7 @@ void BitBuffer_Init(BitBuffer_t* const Buffer)
{
/* Reset the number of stored bits in the buffer */
Buffer->Elements = 0;
/* Reset the data in and out pointer structures in the buffer to the first buffer bit */
Buffer->In.CurrentByte = Buffer->Data;
Buffer->In.ByteMask = (1 << 0);
@ -56,10 +56,10 @@ void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer,
/* If the bit to store is true, set the next bit in the buffer */
if (Bit)
*Buffer->In.CurrentByte |= Buffer->In.ByteMask;
/* Increment the number of stored bits in the buffer counter */
Buffer->Elements++;
/* Check if the current buffer byte is full of stored bits */
if (Buffer->In.ByteMask == (1 << 7))
{
@ -68,8 +68,8 @@ void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer,
Buffer->In.CurrentByte++;
else
Buffer->In.CurrentByte = Buffer->Data;
/* Reset the storage bit mask in the current buffer byte to the first bit */
/* Reset the storage bit mask in the current buffer byte to the first bit */
Buffer->In.ByteMask = (1 << 0);
}
else
@ -81,7 +81,7 @@ void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer,
/** Function to retrieve the next bit stored in the given bit buffer. */
bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer)
{
{
/* Retrieve the value of the next bit stored in the buffer */
bool Bit = ((*Buffer->Out.CurrentByte & Buffer->Out.ByteMask) != 0);
@ -90,17 +90,17 @@ bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer)
/* Decrement the number of stored bits in the buffer counter */
Buffer->Elements--;
/* Check if the current buffer byte is empty of stored bits */
/* Check if the current buffer byte is empty of stored bits */
if (Buffer->Out.ByteMask == (1 << 7))
{
/* Check if the end of the buffer has been reached, if so reset to start of buffer, otherwise advance to next bit */
if (Buffer->Out.CurrentByte != &Buffer->Data[sizeof(Buffer->Data) - 1])
Buffer->Out.CurrentByte++;
else
Buffer->Out.CurrentByte = Buffer->Data;
/* Reset the retrieval bit mask in the current buffer byte to the first bit */
Buffer->Out.CurrentByte = Buffer->Data;
/* Reset the retrieval bit mask in the current buffer byte to the first bit */
Buffer->Out.ByteMask = (1 << 0);
}
else
@ -112,3 +112,4 @@ bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer)
/* Return the retrieved bit from the buffer */
return Bit;
}

31
Projects/Magstripe/Lib/CircularBitBuffer.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -10,13 +10,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -40,7 +40,7 @@
/* Includes: */
#include <avr/io.h>
#include <stdbool.h>
#include <LUFA/Common/Common.h>
/* Macros: */
@ -51,7 +51,7 @@
#else
#define MAX_BITS 1024
#endif
/* Type Defines: */
/** Type define for a pointer to a bit in a bit buffer. */
typedef struct
@ -65,18 +65,18 @@
{
uint8_t Data[MAX_BITS / 8]; /**< Buffer to hold the stored bits in packed form */
uint16_t Elements; /**< Number of stored bits in the bit buffer */
BitBufferPointer_t In; /**< Bit pointer to the next storage location in the buffer */
BitBufferPointer_t Out; /**< Bit pointer to the next retrieval location in the buffer */
} BitBuffer_t;
/* Function Prototypes: */
/* Function Prototypes: */
/** Initialises or resets a given bit buffer, ready to store new bits.
*
*
* \param[in,out] Buffer Bit buffer to initialize
*/
void BitBuffer_Init(BitBuffer_t* const Buffer) ATTR_NON_NULL_PTR_ARG(1);
/** Stores a bit into the next location inside a given bit buffer.
*
* \param[in,out] Buffer Bit buffer to store a bit into
@ -84,7 +84,7 @@
*/
void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer,
const bool Bit) ATTR_NON_NULL_PTR_ARG(1);
/** Retrieves a bit from the next location inside a given bit buffer.
*
* \param[in,out] Buffer Bit buffer to store a bit into
@ -92,5 +92,6 @@
* \return Next bit from the buffer
*/
bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer) ATTR_NON_NULL_PTR_ARG(1);
#endif

11
Projects/Magstripe/Lib/MagstripeHW.h
View file

@ -2,13 +2,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -98,3 +98,4 @@
}
#endif

29
Projects/Magstripe/Magstripe.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -10,13 +10,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -28,13 +28,13 @@
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the MagStripe reader program. This file contains the main tasks of
* the project and is responsible for the initial application hardware configuration.
*/
#include "Magstripe.h"
/** Bit buffers to hold the read bits for each of the three magnetic card tracks before they are transmitted
@ -73,10 +73,10 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
int main(void)
{
SetupHardware();
for (uint8_t Buffer = 0; Buffer < TOTAL_TRACKS; Buffer++)
BitBuffer_Init(&TrackDataBuffers[Buffer]);
sei();
for (;;)
@ -113,7 +113,7 @@ void ReadMagstripeData(void)
const struct
{
uint8_t ClockMask;
uint8_t DataMask;
uint8_t DataMask;
} TrackInfo[] = {{MAG_T1_CLOCK, MAG_T1_DATA},
{MAG_T2_CLOCK, MAG_T2_DATA},
{MAG_T3_CLOCK, MAG_T3_DATA}};
@ -128,7 +128,7 @@ void ReadMagstripeData(void)
bool DataPinLevel = ((Magstripe_LCL & TrackInfo[Track].DataMask) != 0);
bool ClockPinLevel = ((Magstripe_LCL & TrackInfo[Track].ClockMask) != 0);
bool ClockLevelChanged = (((Magstripe_LCL ^ Magstripe_Prev) & TrackInfo[Track].ClockMask) != 0);
/* Sample data on rising clock edges from the card reader */
if (ClockPinLevel && ClockLevelChanged)
BitBuffer_StoreNextBit(&TrackDataBuffers[Track], DataPinLevel);
@ -137,7 +137,7 @@ void ReadMagstripeData(void)
Magstripe_Prev = Magstripe_LCL;
Magstripe_LCL = Magstripe_GetStatus();
}
CurrentTrackBuffer = &TrackDataBuffers[0];
}
@ -200,7 +200,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
/* Still data in the current track; convert next bit to a 1 or 0 keypress */
KeyboardReport->KeyCode[0] = BitBuffer_GetNextBit(CurrentTrackBuffer) ? KEY_1 : KEY_0;
}
*ReportSize = sizeof(USB_KeyboardReport_Data_t);
return false;
}
@ -221,3 +221,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
{
// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
}

25
Projects/Magstripe/Magstripe.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -10,13 +10,13 @@
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -54,10 +54,10 @@
/* Macros: */
/** Total number of tracks which can be read from the card, between 1 and 3. */
#define TOTAL_TRACKS 3
/** HID keyboard keycode to indicate that no is currently pressed. */
#define KEY_NONE 0
/** HID keyboard keycode to indicate that the "1" key is currently pressed. */
#define KEY_1 30
@ -66,11 +66,11 @@
/** HID keyboard keycode to indicate that the enter key is currently pressed. */
#define KEY_ENTER 40
/* Function Prototypes: */
void SetupHardware(void);
void ReadMagstripeData(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_UnhandledControlRequest(void);
void EVENT_USB_Device_StartOfFrame(void);
@ -81,9 +81,10 @@
void* ReportData,
uint16_t* const ReportSize);
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
const uint8_t ReportID,
const uint8_t ReportID,
const uint8_t ReportType,
const void* ReportData,
const uint16_t ReportSize);
#endif

13
Projects/Magstripe/Magstripe.txt
View file

@ -3,7 +3,7 @@
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project
*
* \section SSec_Compat Project Compatibility:
@ -26,7 +26,7 @@
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Keyboard</td>
* </tr>
@ -40,18 +40,18 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section SSec_Description Project Description:
*
* Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card
* reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed
* to be used with the open source Stripe Snoop project at <a>http://stripesnoop.sourceforge.net/</a>.
*
*
* See <a>http://ossguy.com/ss_usb/</a> for the USB reader hardware project website,
* including construction and support details.
*
*
* To use, connect your magnetic card reader device to the USB AVR as follows (pin and port mapping may be adjusted
* from the project makefile):
*
*
* <table>
* <tr>
* <td><b>Signal:</b></td>
@ -162,3 +162,4 @@
* </tr>
* </table>
*/

49
Projects/Magstripe/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = NONE
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 16000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -147,7 +147,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -160,7 +160,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -274,7 +274,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -287,7 +287,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -299,7 +299,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -311,7 +311,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -334,7 +334,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -368,7 +368,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -402,7 +402,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -431,7 +431,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -450,10 +450,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -518,11 +518,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -549,9 +549,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -649,14 +649,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -678,7 +678,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -722,3 +722,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

31
Projects/MissileLauncher/ConfigDescriptor.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void)
uint8_t ConfigDescriptorData[512];
void* CurrConfigLocation = ConfigDescriptorData;
uint16_t CurrConfigBytesRem;
USB_Descriptor_Interface_t* HIDInterface = NULL;
USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
@ -79,7 +79,7 @@ uint8_t ProcessConfigurationDescriptor(void)
* but only found the mandatory IN endpoint, it's safe to continue with the device enumeration */
if (DataINEndpoint)
break;
/* Get the next HID interface from the configuration descriptor */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextHIDInterface) != DESCRIPTOR_SEARCH_COMP_Found)
@ -87,7 +87,7 @@ uint8_t ProcessConfigurationDescriptor(void)
/* Descriptor not found, error out */
return NoCompatibleInterfaceFound;
}
/* Save the interface in case we need to refer back to it later */
HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
@ -97,7 +97,7 @@ uint8_t ProcessConfigurationDescriptor(void)
/* Skip the remainder of the loop as we have not found an endpoint yet */
continue;
}
/* Retrieve the endpoint address from the endpoint descriptor */
USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
@ -107,20 +107,20 @@ uint8_t ProcessConfigurationDescriptor(void)
else
DataOUTEndpoint = EndpointData;
}
/* Configure the HID data IN pipe */
Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
/* Check if the HID interface contained an optional OUT data endpoint */
if (DataOUTEndpoint)
{
/* Configure the HID data OUT pipe */
Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT,
DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
}
}
/* Valid data found, return success */
return SuccessfulConfigRead;
}
@ -145,7 +145,7 @@ uint8_t DComp_NextHIDInterface(void* CurrentDescriptor)
return DESCRIPTOR_SEARCH_Found;
}
}
/* Current descriptor does not match what this comparator is looking for */
return DESCRIPTOR_SEARCH_NotFound;
}
@ -176,3 +176,4 @@ uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor)
/* Current descriptor does not match what this comparator is looking for */
return DESCRIPTOR_SEARCH_NotFound;
}

21
Projects/MissileLauncher/ConfigDescriptor.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -38,16 +38,16 @@
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include "MissileLauncher.h"
/* Macros: */
/** Interface Class value for the Human Interface Device class. */
#define HID_CLASS 0x03
/** Pipe number for the HID data IN pipe. */
#define HID_DATA_IN_PIPE 1
/** Pipe number for the HID data OUT pipe. */
#define HID_DATA_OUT_PIPE 2
@ -60,7 +60,7 @@
DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */
};
};
/* Function Prototypes: */
uint8_t ProcessConfigurationDescriptor(void);
@ -69,3 +69,4 @@
uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor);
#endif

39
Projects/MissileLauncher/MissileLauncher.c
View file

@ -2,7 +2,7 @@
USB Missile Launcher Demo
Copyright (C) Dave Fletcher, 2010.
fletch at fletchtronics dot net
Based on research by Scott Weston at
http://code.google.com/p/pymissile
*/
@ -11,13 +11,13 @@
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Dave Fletcher (fletch [at] fletchtronics [dot] net)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -42,7 +42,7 @@
* the application and is responsible for the initial application hardware configuration as well
* as the sending of commands to the attached launcher toy.
*/
#include "MissileLauncher.h"
/** Launcher first init command report data sequence */
@ -103,7 +103,7 @@ int main(void)
for (;;)
{
Read_Joystick_Status();
HID_Host_Task();
USB_USBTask();
}
@ -173,7 +173,7 @@ void Send_Command(uint8_t* const Command)
Send_Command_Report(CMD_INITB, 8);
Send_Command_Report(Command, LAUNCHER_CMD_BUFFER_SIZE);
}
CmdState = Command;
}
@ -231,13 +231,13 @@ void DiscardNextReport(void)
{
/* Refreeze HID data IN pipe */
Pipe_Freeze();
return;
}
/* Clear the IN endpoint, ready for next data packet */
Pipe_ClearIN();
/* Refreeze HID data IN pipe */
Pipe_Freeze();
}
@ -252,7 +252,7 @@ void WriteNextReport(uint8_t* const ReportOUTData,
{
/* Select and unfreeze HID data OUT pipe */
Pipe_SelectPipe(HID_DATA_OUT_PIPE);
/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the
* control endpoint instead) - check to see if the OUT endpoint has been initialized */
if (Pipe_IsConfigured())
@ -264,13 +264,13 @@ void WriteNextReport(uint8_t* const ReportOUTData,
{
/* Refreeze the data OUT pipe */
Pipe_Freeze();
return;
}
/* Write out HID report data */
Pipe_Write_Stream_LE(ReportOUTData, ReportLength);
Pipe_Write_Stream_LE(ReportOUTData, ReportLength);
/* Clear the OUT endpoint, send last data packet */
Pipe_ClearOUT();
@ -324,12 +324,12 @@ void HID_Host_Task(void)
{
/* Indicate error status */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
@ -338,3 +338,4 @@ void HID_Host_Task(void)
break;
}
}

23
Projects/MissileLauncher/MissileLauncher.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -50,9 +50,9 @@
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include "ConfigDescriptor.h"
/* Macros: */
/** HID Class specific request to send a HID report to the device. */
#define REQ_SetReport 0x09
@ -68,10 +68,10 @@
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** Size of the Launcher report command buffer. */
#define LAUNCHER_CMD_BUFFER_SIZE 64
/* Function Prototypes: */
void SetupHardware(void);
@ -92,5 +92,6 @@
void DiscardNextReport(void);
void WriteNextReport(uint8_t* const ReportOUTData,
const uint16_t ReportLength);
#endif

7
Projects/MissileLauncher/MissileLauncher.txt
View file

@ -3,7 +3,7 @@
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage David Fletcher's Missile Launcher
*
* \section SSec_Compat Project Compatibility:
@ -25,7 +25,7 @@
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
@ -39,7 +39,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section SSec_Description Project Description:
*
* Missile Launcher host. This is a host driver for the popular USB-controller table top toy missile launchers,
* which can typically aim and fire small foam "missiles" from a spring-loaded turret. This project controls the
@ -57,3 +57,4 @@
* </tr>
* </table>
*/

49
Projects/MissileLauncher/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -132,7 +132,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -145,7 +145,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -259,7 +259,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -272,7 +272,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -284,7 +284,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -296,7 +296,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -319,7 +319,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -353,7 +353,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -387,7 +387,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -416,7 +416,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -435,10 +435,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -503,11 +503,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -534,9 +534,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -634,14 +634,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -663,7 +663,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -707,3 +707,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

1
Projects/RelayBoard/Descriptors.c
View file

@ -200,3 +200,4 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
*DescriptorAddress = Address;
return Size;
}

1
Projects/RelayBoard/Descriptors.h
View file

@ -58,3 +58,4 @@
const void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

7
Projects/RelayBoard/RelayBoard.c
View file

@ -44,7 +44,7 @@
int main(void)
{
SetupHardware();
sei();
for (;;)
@ -103,7 +103,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
break;
}
}
break;
case 0x01:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
@ -130,7 +130,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
ControlData[1] = (PORTC & RELAY4) ? 2 : 3;
break;
}
if (ControlData[1])
Endpoint_Write_Control_Stream_LE(ControlData, sizeof(ControlData));
@ -140,3 +140,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
break;
}
}

1
Projects/RelayBoard/RelayBoard.h
View file

@ -62,3 +62,4 @@
void EVENT_USB_Device_UnhandledControlRequest(void);
#endif

2
Projects/RelayBoard/RelayBoard.txt
View file

@ -92,4 +92,4 @@
* </tr>
* </table>
*
*/
*/

49
Projects/RelayBoard/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -135,7 +135,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -148,7 +148,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -299,7 +299,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -322,7 +322,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -419,7 +419,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -506,11 +506,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -637,14 +637,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

95
Projects/TempDataLogger/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -30,9 +30,9 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
@ -83,22 +83,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x2063,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
@ -109,38 +109,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.MS_Interface =
.MS_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x08,
.SubClass = 0x06,
.Protocol = 0x50,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.MS_DataInEndpoint =
.MS_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
@ -150,7 +150,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.PollingIntervalMS = 0x00
},
.MS_DataOutEndpoint =
.MS_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
@ -159,27 +159,27 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x00
},
.HID_Interface =
.HID_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 1,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = 0x03,
.SubClass = 0x00,
.Protocol = HID_BOOTP_NonBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.HID_GenericHID =
.HID_GenericHID =
{
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
@ -187,15 +187,15 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
.HIDReportLength = sizeof(GenericReport)
},
.HID_ReportINEndpoint =
.HID_ReportINEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = GENERIC_EPSIZE,
.PollingIntervalMS = 0x0A
},
},
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
@ -205,7 +205,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
@ -227,7 +227,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String},
.UnicodeString = L"Temperature Datalogger"
};
@ -249,42 +249,43 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
switch (DescriptorType)
{
case DTYPE_Device:
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
case HID_DTYPE_HID:
case HID_DTYPE_HID:
Address = &ConfigurationDescriptor.HID_GenericHID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
case HID_DTYPE_Report:
case HID_DTYPE_Report:
Address = &GenericReport;
Size = sizeof(GenericReport);
break;
}
*DescriptorAddress = Address;
return Size;
}

19
Projects/TempDataLogger/Descriptors.h
View file

@ -1,11 +1,11 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
@ -15,15 +15,15 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/MassStorage.h>
#include <LUFA/Drivers/USB/Class/HID.h>
#include "TempDataLogger.h"
/* Macros: */
/** Endpoint number of the Mass Storage device-to-host data IN endpoint. */
#define MASS_STORAGE_IN_EPNUM 3
#define MASS_STORAGE_IN_EPNUM 3
/** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */
#define MASS_STORAGE_OUT_EPNUM 4
#define MASS_STORAGE_OUT_EPNUM 4
/** Size in bytes of the Mass Storage data endpoints. */
#define MASS_STORAGE_IO_EPSIZE 64
@ -33,11 +33,11 @@
/** Size in bytes of the Generic HID reporting endpoint. */
#define GENERIC_EPSIZE 16
/** Size in bytes of the Generic HID reports (including report ID byte). */
#define GENERIC_REPORT_SIZE sizeof(Device_Report_t)
/* Type Defines: */
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
@ -52,7 +52,7 @@
USB_HID_Descriptor_HID_t HID_GenericHID;
USB_Descriptor_Endpoint_t HID_ReportINEndpoint;
} USB_Descriptor_Configuration_t;
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
@ -60,3 +60,4 @@
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

23
Projects/TempDataLogger/Lib/DS1307.c
View file

@ -1,6 +1,6 @@
/*
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -15,7 +15,7 @@ void DS1307_SetDate(const uint8_t Day,
return;
#endif
DS1307_DateRegs_t CurrentRTCDate;
DS1307_DateRegs_t CurrentRTCDate;
CurrentRTCDate.Byte1.Fields.TenDay = (Day / 10);
CurrentRTCDate.Byte1.Fields.Day = (Day % 10);
CurrentRTCDate.Byte2.Fields.TenMonth = (Month / 10);
@ -29,7 +29,7 @@ void DS1307_SetDate(const uint8_t Day,
TWI_SendByte(CurrentRTCDate.Byte1.IntVal);
TWI_SendByte(CurrentRTCDate.Byte2.IntVal);
TWI_SendByte(CurrentRTCDate.Byte3.IntVal);
TWI_StopTransmission();
}
}
@ -51,18 +51,18 @@ void DS1307_SetTime(const uint8_t Hour,
CurrentRTCTime.Byte3.Fields.TenHour = (Hour / 10);
CurrentRTCTime.Byte3.Fields.Hour = (Hour % 10);
CurrentRTCTime.Byte3.Fields.TwelveHourMode = false;
if (TWI_StartTransmission(DS1307_ADDRESS_WRITE, 10))
{
TWI_SendByte(DS1307_TIMEREG_START);
TWI_SendByte(CurrentRTCTime.Byte1.IntVal);
TWI_SendByte(CurrentRTCTime.Byte2.IntVal);
TWI_SendByte(CurrentRTCTime.Byte3.IntVal);
TWI_StopTransmission();
}
}
void DS1307_GetDate(uint8_t* const Day,
uint8_t* const Month,
uint8_t* const Year)
@ -77,7 +77,7 @@ void DS1307_GetDate(uint8_t* const Day,
if (TWI_StartTransmission(DS1307_ADDRESS_WRITE, 10))
{
TWI_SendByte(DS1307_DATEREG_START);
TWI_StopTransmission();
}
@ -88,7 +88,7 @@ void DS1307_GetDate(uint8_t* const Day,
TWI_ReceiveByte(&CurrentRTCDate.Byte1.IntVal, false);
TWI_ReceiveByte(&CurrentRTCDate.Byte2.IntVal, false);
TWI_ReceiveByte(&CurrentRTCDate.Byte3.IntVal, true);
TWI_StopTransmission();
}
@ -111,10 +111,10 @@ void DS1307_GetTime(uint8_t* const Hour,
if (TWI_StartTransmission(DS1307_ADDRESS_WRITE, 10))
{
TWI_SendByte(DS1307_TIMEREG_START);
TWI_StopTransmission();
}
DS1307_TimeRegs_t CurrentRTCTime;
if (TWI_StartTransmission(DS1307_ADDRESS_READ, 10))
@ -122,7 +122,7 @@ void DS1307_GetTime(uint8_t* const Hour,
TWI_ReceiveByte(&CurrentRTCTime.Byte1.IntVal, false);
TWI_ReceiveByte(&CurrentRTCTime.Byte2.IntVal, false);
TWI_ReceiveByte(&CurrentRTCTime.Byte3.IntVal, true);
TWI_StopTransmission();
}
@ -130,3 +130,4 @@ void DS1307_GetTime(uint8_t* const Hour,
*Minute = (CurrentRTCTime.Byte2.Fields.TenMin * 10) + CurrentRTCTime.Byte2.Fields.Min;
*Hour = (CurrentRTCTime.Byte3.Fields.TenHour * 10) + CurrentRTCTime.Byte3.Fields.Hour;
}

23
Projects/TempDataLogger/Lib/DS1307.h
View file

@ -1,6 +1,6 @@
/*
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -24,10 +24,10 @@
unsigned int TenSec : 3;
unsigned int CH : 1;
} Fields;
uint8_t IntVal;
} Byte1;
union
{
struct
@ -36,10 +36,10 @@
unsigned int TenMin : 3;
unsigned int Reserved : 1;
} Fields;
uint8_t IntVal;
} Byte2;
union
{
struct
@ -49,7 +49,7 @@
unsigned int TwelveHourMode : 1;
unsigned int Reserved : 1;
} Fields;
uint8_t IntVal;
} Byte3;
} DS1307_TimeRegs_t;
@ -64,7 +64,7 @@
unsigned int TenDay : 2;
unsigned int Reserved : 2;
} Fields;
uint8_t IntVal;
} Byte1;
@ -76,10 +76,10 @@
unsigned int TenMonth : 1;
unsigned int Reserved : 3;
} Fields;
uint8_t IntVal;
} Byte2;
union
{
struct
@ -87,7 +87,7 @@
unsigned int Year : 4;
unsigned int TenYear : 4;
} Fields;
uint8_t IntVal;
} Byte3;
} DS1307_DateRegs_t;
@ -95,7 +95,7 @@
/* Macros: */
#define DS1307_TIMEREG_START 0x00
#define DS1307_DATEREG_START 0x04
#define DS1307_ADDRESS_READ 0b11010001
#define DS1307_ADDRESS_WRITE 0b11010000
@ -114,3 +114,4 @@
uint8_t* const Second);
#endif

81
Projects/TempDataLogger/Lib/DataflashManager.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -77,7 +77,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -86,7 +86,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
{
/* Clear the current endpoint bank */
Endpoint_ClearOUT();
/* Wait until the host has sent another packet */
if (Endpoint_WaitUntilReady())
return;
@ -125,7 +125,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
/* Send the Dataflash buffer write command */
Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, 0);
Dataflash_SendAddressBytes(0, 0);
}
/* Write one 16-byte chunk of data to the Dataflash */
@ -145,7 +145,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
Dataflash_SendByte(Endpoint_Read_Byte());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
@ -154,9 +154,9 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
/* Check if the current command is being aborted by the host */
if (MSInterfaceInfo->State.IsMassStoreReset)
return;
return;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
TotalBlocks--;
}
@ -201,15 +201,15 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
/* Wait until endpoint is ready before continuing */
if (Endpoint_WaitUntilReady())
return;
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -218,12 +218,12 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
{
/* Clear the endpoint bank to send its contents to the host */
Endpoint_ClearIN();
/* Wait until the endpoint is ready for more data */
if (Endpoint_WaitUntilReady())
return;
}
/* Check if end of Dataflash page reached */
if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
{
@ -233,7 +233,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
/* Select the next Dataflash chip based on the new Dataflash page index */
Dataflash_SelectChipFromPage(CurrDFPage);
/* Send the Dataflash main memory page read command */
Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
Dataflash_SendAddressBytes(CurrDFPage, 0);
@ -241,7 +241,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
}
}
/* Read one 16-byte chunk of data from the Dataflash */
Endpoint_Write_Byte(Dataflash_ReceiveByte());
@ -260,10 +260,10 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
Endpoint_Write_Byte(Dataflash_ReceiveByte());
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
/* Increment the block 16 byte block counter */
BytesInBlockDiv16++;
@ -271,11 +271,11 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
if (MSInterfaceInfo->State.IsMassStoreReset)
return;
}
/* Decrement the blocks remaining counter */
TotalBlocks--;
}
/* If the endpoint is full, send its contents to the host */
if (!(Endpoint_IsReadWriteAllowed()))
Endpoint_ClearIN();
@ -315,11 +315,11 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
/* Send the Dataflash buffer write command */
Dataflash_SendByte(DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, CurrDFPageByte);
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -359,18 +359,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
Dataflash_SendByte(DF_CMD_BUFF1WRITE);
Dataflash_SendAddressBytes(0, 0);
}
/* Write one 16-byte chunk of data to the Dataflash */
for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
Dataflash_SendByte(*(BufferPtr++));
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
/* Increment the block 16 byte block counter */
BytesInBlockDiv16++;
BytesInBlockDiv16++;
}
/* Decrement the blocks remaining counter and reset the sub block counter */
TotalBlocks--;
}
@ -416,7 +416,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
while (TotalBlocks)
{
uint8_t BytesInBlockDiv16 = 0;
/* Write an endpoint packet sized data block to the Dataflash */
while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
{
@ -429,7 +429,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
/* Select the next Dataflash chip based on the new Dataflash page index */
Dataflash_SelectChipFromPage(CurrDFPage);
/* Send the Dataflash main memory page read command */
Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
Dataflash_SendAddressBytes(CurrDFPage, 0);
@ -437,19 +437,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
Dataflash_SendByte(0x00);
}
}
/* Read one 16-byte chunk of data from the Dataflash */
for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
*(BufferPtr++) = Dataflash_ReceiveByte();
/* Increment the Dataflash page 16 byte block counter */
CurrDFPageByteDiv16++;
/* Increment the block 16 byte block counter */
BytesInBlockDiv16++;
}
/* Decrement the blocks remaining counter */
TotalBlocks--;
}
@ -464,7 +464,7 @@ void DataflashManager_ResetDataflashProtections(void)
/* Select first Dataflash chip, send the read status register command */
Dataflash_SelectChip(DATAFLASH_CHIP1);
Dataflash_SendByte(DF_CMD_GETSTATUS);
/* Check if sector protection is enabled */
if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
{
@ -476,12 +476,12 @@ void DataflashManager_ResetDataflashProtections(void)
Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
}
/* Select second Dataflash chip (if present on selected board), send read status register command */
#if (DATAFLASH_TOTALCHIPS == 2)
Dataflash_SelectChip(DATAFLASH_CHIP2);
Dataflash_SendByte(DF_CMD_GETSTATUS);
/* Check if sector protection is enabled */
if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
{
@ -494,7 +494,7 @@ void DataflashManager_ResetDataflashProtections(void)
Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
}
#endif
/* Deselect current Dataflash chip */
Dataflash_DeselectChip();
}
@ -528,6 +528,7 @@ bool DataflashManager_CheckDataflashOperation(void)
if (ReturnByte != DF_MANUFACTURER_ATMEL)
return false;
#endif
return true;
}

23
Projects/TempDataLogger/Lib/DataflashManager.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,13 +32,13 @@
*
* Header file for DataflashManager.c.
*/
#ifndef _DATAFLASH_MANAGER_H_
#define _DATAFLASH_MANAGER_H_
/* Includes: */
#include <avr/io.h>
#include "TempDataLogger.h"
#include "Descriptors.h"
@ -60,12 +60,12 @@
* storage media (Dataflash) using a different native block size. Do not change this value.
*/
#define VIRTUAL_MEMORY_BLOCK_SIZE 512
/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
* change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
*/
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
/* Function Prototypes: */
void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const uint32_t BlockAddress,
@ -81,5 +81,6 @@
uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
void DataflashManager_ResetDataflashProtections(void);
bool DataflashManager_CheckDataflashOperation(void);
#endif

1
Projects/TempDataLogger/Lib/FATFs/00readme.txt
View file

@ -115,3 +115,4 @@ REVISION HISTORY
Changed some types on the API, XCHAR->TCHAR.
Changed fname member in the FILINFO structure on Unicode cfg.
String functions support UTF-8 encoding files on Unicode cfg.

1
Projects/TempDataLogger/Lib/FATFs/diskio.c
View file

@ -97,3 +97,4 @@ DWORD get_fattime (void)
((DWORD)Minute << 5) |
(((DWORD)Second >> 1) << 0);
}

1
Projects/TempDataLogger/Lib/FATFs/diskio.h
View file

@ -69,3 +69,4 @@ DRESULT disk_ioctl (BYTE, BYTE, void*);
#define _DISKIO
#endif

5
Projects/TempDataLogger/Lib/FATFs/ff.c
View file

@ -2289,7 +2289,7 @@ FRESULT f_close (
#if _FS_REENTRANT
res = validate(fp->fs, fp->id);
if (res == FR_OK) {
res = dec_lock(fp->fs, fp->lockid);
res = dec_lock(fp->fs, fp->lockid);
unlock_fs(fp->fs, FR_OK);
}
#else
@ -3539,7 +3539,7 @@ int f_printf (
res++;
}
do {
cc = f_putc(s[--i], fil);
cc = f_putc(s[--i], fil);
res++;
} while (i && cc != EOF);
if (cc != EOF) cc = 0;
@ -3551,3 +3551,4 @@ int f_printf (
#endif /* !_FS_READONLY */
#endif /* _USE_STRFUNC */

1
Projects/TempDataLogger/Lib/FATFs/ff.h
View file

@ -611,3 +611,4 @@ void ff_rel_grant (_SYNC_t); /* Unlock sync object */
#endif
#endif /* _FATFS */

1
Projects/TempDataLogger/Lib/FATFs/ffconf.h
View file

@ -179,3 +179,4 @@
#endif /* _FFCONFIG */

1
Projects/TempDataLogger/Lib/FATFs/integer.h
View file

@ -37,3 +37,4 @@ typedef unsigned char BOOL;
#endif
#endif

63
Projects/TempDataLogger/Lib/SCSI.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -34,29 +34,29 @@
* devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
* which wrap around standard SCSI device commands for controlling the actual storage medium.
*/
#define INCLUDE_FROM_SCSI_C
#include "SCSI.h"
/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
* features and capabilities.
*/
SCSI_Inquiry_Response_t InquiryData =
SCSI_Inquiry_Response_t InquiryData =
{
.DeviceType = DEVICE_TYPE_BLOCK,
.PeripheralQualifier = 0,
.Removable = true,
.Version = 0,
.ResponseDataFormat = 2,
.NormACA = false,
.TrmTsk = false,
.AERC = false,
.AdditionalLength = 0x1F,
.SoftReset = false,
.CmdQue = false,
.Linked = false,
@ -64,7 +64,7 @@ SCSI_Inquiry_Response_t InquiryData =
.WideBus16Bit = false,
.WideBus32Bit = false,
.RelAddr = false,
.VendorID = "LUFA",
.ProductID = "Dataflash Disk",
.RevisionID = {'0','.','0','0'},
@ -96,13 +96,13 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
{
case SCSI_CMD_INQUIRY:
CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
break;
case SCSI_CMD_REQUEST_SENSE:
CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
break;
case SCSI_CMD_READ_CAPACITY_10:
CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
break;
case SCSI_CMD_SEND_DIAGNOSTIC:
CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
@ -134,7 +134,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
SCSI_ASENSEQ_NO_QUALIFIER);
return true;
}
@ -165,11 +165,11 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
return false;
}
Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK);
uint8_t PadBytes[AllocationLength - BytesTransferred];
/* Pad out remaining bytes with 0x00 */
Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK);
@ -178,7 +178,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
/* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
return true;
}
@ -193,7 +193,7 @@ static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterf
{
uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);
uint8_t PadBytes[AllocationLength - BytesTransferred];
Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK);
@ -221,10 +221,10 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt
Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK);
Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK);
Endpoint_ClearIN();
/* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
return true;
}
@ -248,21 +248,21 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte
return false;
}
/* Check to see if all attached Dataflash ICs are functional */
if (!(DataflashManager_CheckDataflashOperation()))
{
/* Update SENSE key with a hardware error condition and return command fail */
SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
SCSI_ASENSEQ_NO_QUALIFIER);
SCSI_ASENSEQ_NO_QUALIFIER);
return false;
}
/* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
return true;
}
@ -280,13 +280,13 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
{
uint32_t BlockAddress;
uint16_t TotalBlocks;
/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
/* Check if the block address is outside the maximum allowable value for the LUN */
if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS)
{
@ -297,7 +297,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
return false;
}
/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
if (IsDataRead == DATA_READ)
DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
@ -306,6 +306,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
/* Update the bytes transferred counter and succeed the command */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
return true;
}

25
Projects/TempDataLogger/Lib/SCSI.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -32,7 +32,7 @@
*
* Header file for SCSI.c.
*/
#ifndef _SCSI_H_
#define _SCSI_H_
@ -46,7 +46,7 @@
#include "../TempDataLogger.h"
#include "../Descriptors.h"
#include "DataflashManager.h"
/* Macros: */
/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
* is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
@ -68,13 +68,13 @@
/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
#define DEVICE_TYPE_BLOCK 0x00
/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
#define DEVICE_TYPE_CDROM 0x05
/* Function Prototypes: */
bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
#if defined(INCLUDE_FROM_SCSI_C)
static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
@ -83,5 +83,6 @@
static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const bool IsDataRead);
#endif
#endif

41
Projects/TempDataLogger/TempDataLogger.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -74,7 +74,7 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface =
.ReportINEndpointNumber = GENERIC_IN_EPNUM,
.ReportINEndpointSize = GENERIC_EPSIZE,
.ReportINEndpointDoubleBank = false,
.PrevReportINBuffer = PrevHIDReportBuffer,
.PrevReportINBufferSize = sizeof(PrevHIDReportBuffer),
},
@ -104,12 +104,12 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
/* Check to see if the logging interval has expired */
if (CurrentLoggingTicks++ < LoggingInterval500MS_SRAM)
return;
/* Reset log tick counter to prepare for next logging interval */
CurrentLoggingTicks = 0;
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
/* Only log when not connected to a USB host */
if (USB_DeviceState == DEVICE_STATE_Unattached)
{
@ -128,7 +128,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
f_write(&TempLogFile, LineBuffer, BytesWritten, &BytesWritten);
f_sync(&TempLogFile);
}
LEDs_SetAllLEDs(LEDMask);
}
@ -141,7 +141,7 @@ int main(void)
/* Fetch logging interval from EEPROM */
LoggingInterval500MS_SRAM = eeprom_read_byte(&LoggingInterval500MS_EEPROM);
/* Check if the logging interval is invalid (0xFF) indicating that the EEPROM is blank */
if (LoggingInterval500MS_SRAM == 0xFF)
LoggingInterval500MS_SRAM = DEFAULT_LOG_INTERVAL;
@ -155,7 +155,7 @@ int main(void)
/* Discard the first sample from the temperature sensor, as it is generally incorrect */
volatile uint8_t Dummy = Temperature_GetTemperature();
(void)Dummy;
for (;;)
{
MS_Device_USBTask(&Disk_MS_Interface);
@ -206,7 +206,7 @@ void SetupHardware(void)
Dataflash_Init();
USB_Init();
TWI_Init();
/* 500ms logging interval timer configuration */
OCR1A = ((F_CPU / 1024) / 2);
TCCR1B = (1 << WGM12) | (1 << CS12) | (1 << CS10);
@ -229,7 +229,7 @@ void EVENT_USB_Device_Connect(void)
void EVENT_USB_Device_Disconnect(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
/* Mount and open the log file on the Dataflash FAT partition */
OpenLogFile();
}
@ -259,18 +259,18 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
{
bool CommandSuccess;
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
LEDs_SetAllLEDs(LEDMASK_USB_READY);
return CommandSuccess;
}
/** HID class driver callback function for the creation of HID reports to the host.
*
* \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced
* \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the
* \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the
* generated report ID
* \param[in] ReportType Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
* \param[out] ReportData Pointer to a buffer where the created report should be stored
@ -288,7 +288,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
DS1307_GetDate(&ReportParams->Day, &ReportParams->Month, &ReportParams->Year);
DS1307_GetTime(&ReportParams->Hour, &ReportParams->Minute, &ReportParams->Second);
ReportParams->LogInterval500MS = LoggingInterval500MS_SRAM;
*ReportSize = sizeof(Device_Report_t);
@ -310,10 +310,10 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
const uint16_t ReportSize)
{
Device_Report_t* ReportParams = (Device_Report_t*)ReportData;
DS1307_SetDate(ReportParams->Day, ReportParams->Month, ReportParams->Year);
DS1307_SetTime(ReportParams->Hour, ReportParams->Minute, ReportParams->Second);
/* If the logging interval has changed from its current value, write it to EEPROM */
if (LoggingInterval500MS_SRAM != ReportParams->LogInterval500MS)
{
@ -321,3 +321,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
eeprom_update_byte(&LoggingInterval500MS_EEPROM, LoggingInterval500MS_SRAM);
}
}

25
Projects/TempDataLogger/TempDataLogger.h
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -42,7 +42,7 @@
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdio.h>
#include "Descriptors.h"
#include "Lib/SCSI.h"
@ -73,13 +73,13 @@
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
/** Filename for the log data when written to the dataflash FAT filesystem. */
#define LOG_FILENAME "TEMPLOG.txt"
/** Default log interval when the EEPROM is blank, in 500ms ticks. */
#define DEFAULT_LOG_INTERVAL 20
/* Type Defines: */
typedef struct
{
@ -90,7 +90,7 @@
uint8_t Hour;
uint8_t Minute;
uint8_t Second;
uint8_t LogInterval500MS;
} Device_Report_t;
@ -111,9 +111,10 @@
void* ReportData,
uint16_t* const ReportSize);
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
const uint8_t ReportID,
const uint8_t ReportID,
const uint8_t ReportType,
const void* ReportData,
const uint16_t ReportSize);
#endif

5
Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt
View file

@ -10,7 +10,7 @@
the terms and conditions of version 3 of the GNU General Public
License, supplemented by the additional permissions listed below.
0. Additional Definitions.
0. Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser
General Public License, and the "GNU GPL" refers to version 3 of the GNU
@ -111,7 +111,7 @@ the following:
a copy of the Library already present on the user's computer
system, and (b) will operate properly with a modified version
of the Library that is interface-compatible with the Linked
Version.
Version.
e) Provide Installation Information, but only if you would otherwise
be required to provide such information under section 6 of the
@ -163,3 +163,4 @@ whether future versions of the GNU Lesser General Public License shall
apply, that proxy's public statement of acceptance of any version is
permanent authorization for you to choose that version for the
Library.

1
Projects/TempDataLogger/TempLogHostApp/COPYING.txt
View file

@ -672,3 +672,4 @@ may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

1
Projects/TempDataLogger/TempLogHostApp/README.txt
View file

@ -19,3 +19,4 @@ methods.
LogitechMX5000.cs is a simple example of how the library can be used. Other
examples on common devices are welcomed.

7
Projects/TempDataLogger/TemperatureDataLogger.txt
View file

@ -3,7 +3,7 @@
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Temperature Datalogger Project
*
* \section SSec_Compat Demo Compatibility:
@ -28,7 +28,7 @@
* <td>Mass Storage Device \n
* Human Interface Device</td>
* </tr>
* <tr>
* <tr>
* <td><b>USB Subclasses:</b></td>
* <td>Bulk-Only Transport \n
* Keyboard Subclass</td>
@ -47,7 +47,7 @@
* </tr>
* </table>
*
* \section SSec_Description Project Description:
* \section SSec_Description Project Description:
*
* Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by
* the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem
@ -83,3 +83,4 @@
* </tr>
* </table>
*/

49
Projects/TempDataLogger/makefile
View file

@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@ -146,7 +146,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
CPPSRC =
# List Assembler source files here.
@ -159,7 +159,7 @@ CPPSRC =
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@ -273,7 +273,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@ -286,7 +286,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -298,7 +298,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -310,7 +310,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
EXTRALIBDIRS =
@ -333,7 +333,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@ -367,7 +367,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@ -401,7 +401,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@ -430,7 +430,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -449,10 +449,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@ -517,11 +517,11 @@ sizeafter:
# Display compiler version information.
gccversion :
gccversion :
@$(CC) --version
# Program the device.
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@ -548,9 +548,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -648,14 +648,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@ -677,7 +677,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@ -721,3 +721,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config

103
Projects/USBtoSerial/Descriptors.c
View file

@ -1,7 +1,7 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
@ -9,13 +9,13 @@
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@ -30,9 +30,9 @@
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
* the device's capabilities and functions.
*/
#include "Descriptors.h"
@ -57,22 +57,22 @@
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x02,
.SubClass = 0x00,
.Protocol = 0x00,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0x204B,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = USE_INTERNAL_SERIAL,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
@ -83,102 +83,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.CDC_CCI_Interface =
.CDC_CCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_Functional_Header =
.CDC_Functional_Header =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_Header,
.CDCSpecification = VERSION_BCD(01.10),
},
.CDC_Functional_ACM =
.CDC_Functional_ACM =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_ACM,
.Capabilities = 0x06,
},
.CDC_Functional_Union =
.CDC_Functional_Union =
{
.Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
.Subtype = CDC_DSUBTYPE_CSInterface_Union,
.MasterInterfaceNumber = 0,
.SlaveInterfaceNumber = 1,
},
.CDC_NotificationEndpoint =
.CDC_NotificationEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
.CDC_DCI_Interface =
.CDC_DCI_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 1,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_DataOutEndpoint =
.CDC_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
.CDC_DataInEndpoint =
.CDC_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
@ -193,7 +193,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
@ -204,7 +204,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
@ -215,7 +215,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(23), .Type = DTYPE_String},
.UnicodeString = L"LUFA USB-RS232 Adapter"
};
@ -237,34 +237,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
switch (DescriptorType)
{
case DTYPE_Device:
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

Some files were not shown because too many files have changed in this diff Show more