Updates to Ploopy Classic, Mouse, and Thumb for RP2040 hardware upgrade (#24880)
Co-authored-by: Drashna Jaelre <drashna@live.com>
This commit is contained in:
ploopyco
GitHub
parent
2f27b3dc78
commit
50967dbe7e
38 changed files with 311 additions and 99 deletions
|
|
@ -18,11 +18,6 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
// These pins are not broken out, and cannot be used normally.
|
||||
// They are set as output and pulled high, by default
|
||||
#define UNUSABLE_PINS \
|
||||
{ B4, D6, F1, F5, F6, F7 }
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
|
|
@ -30,13 +25,7 @@
|
|||
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW33XX Settings */
|
||||
#define PMW33XX_CS_PIN B0
|
||||
|
||||
#define ENCODER_BUTTON_COL 1
|
||||
#define ENCODER_BUTTON_ROW 0
|
||||
/* Custom encoder needs to specify just how many encoders we have */
|
||||
#define NUM_ENCODERS 1
|
||||
|
||||
#define ENCODER_A_PINS { F0 }
|
||||
#define ENCODER_B_PINS { F4 }
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"keyboard_name": "Mouse",
|
||||
"manufacturer": "PloopyCo",
|
||||
"manufacturer": "Ploopy",
|
||||
"url": "www.ploopy.co",
|
||||
"maintainer": "drashna",
|
||||
"usb": {
|
||||
|
|
@ -9,6 +9,9 @@
|
|||
"device_version": "0.0.1",
|
||||
"max_power": 100
|
||||
},
|
||||
"bootmagic": {
|
||||
"matrix": [0, 3]
|
||||
},
|
||||
"features": {
|
||||
"bootmagic": true,
|
||||
"extrakey": true,
|
||||
|
|
@ -17,28 +20,6 @@
|
|||
"pointing_device": true,
|
||||
"encoder": true
|
||||
},
|
||||
"bootmagic": {
|
||||
"matrix": [0, 3]
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "B5"
|
||||
},
|
||||
"rgblight": {
|
||||
"led_count": 4,
|
||||
"max_brightness": 40,
|
||||
"animations": {
|
||||
"breathing": true,
|
||||
"rainbow_mood": true,
|
||||
"rainbow_swirl": true
|
||||
}
|
||||
},
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"matrix_pins": {
|
||||
"direct": [
|
||||
["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"]
|
||||
]
|
||||
},
|
||||
"encoder": {
|
||||
"driver": "custom"
|
||||
},
|
||||
1
keyboards/ploopyco/mouse/post_rules.mk
Normal file
1
keyboards/ploopyco/mouse/post_rules.mk
Normal file
|
|
@ -0,0 +1 @@
|
|||
POINTING_DEVICE_DRIVER = pmw3360
|
||||
|
|
@ -6,14 +6,14 @@ It's a DIY, QMK Powered Mouse!!!!
|
|||
|
||||
|
||||
* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
|
||||
* Hardware Supported: ATMega32u4 8MHz(3.3v)
|
||||
* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040
|
||||
* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make ploopyco/mouse:default:flash
|
||||
|
||||
To jump to the bootloader, hold down "Button 4" (the "forward" button on the left side)
|
||||
|
||||
To jump to the bootloader, hold down "Button 4" (the "forward" button on the left side)
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
|
|
|
|||
33
keyboards/ploopyco/mouse/rev1_002/config.h
Normal file
33
keyboards/ploopyco/mouse/rev1_002/config.h
Normal file
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
||||
* Copyright 2019 Sunjun Kim
|
||||
* Copyright 2020 Ploopy Corporation
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// These pins are not broken out, and cannot be used normally.
|
||||
// They are set as output and pulled high, by default
|
||||
#define UNUSABLE_PINS \
|
||||
{ B4, D6, F1, F5, F6, F7 }
|
||||
|
||||
// If board has a debug LED, you can enable it by defining this
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW33XX Settings */
|
||||
#define PMW33XX_CS_PIN B0
|
||||
|
||||
#define ENCODER_A_PINS { F0 }
|
||||
#define ENCODER_B_PINS { F4 }
|
||||
21
keyboards/ploopyco/mouse/rev1_002/keyboard.json
Normal file
21
keyboards/ploopyco/mouse/rev1_002/keyboard.json
Normal file
|
|
@ -0,0 +1,21 @@
|
|||
{
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"matrix_pins": {
|
||||
"direct": [
|
||||
["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"]
|
||||
]
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "B5"
|
||||
},
|
||||
"rgblight": {
|
||||
"led_count": 3,
|
||||
"max_brightness": 40,
|
||||
"animations": {
|
||||
"breathing": true,
|
||||
"rainbow_mood": true,
|
||||
"rainbow_swirl": true
|
||||
}
|
||||
}
|
||||
}
|
||||
3
keyboards/ploopyco/mouse/rev1_002/readme.md
Normal file
3
keyboards/ploopyco/mouse/rev1_002/readme.md
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
See the [main readme](../readme.md) for more details.
|
||||
|
||||
This is for the R1.002 version of the Mouse. It's easily distinguishable from the R1.003+ versions of the Mouse because it has an ATmega32u4 on the board.
|
||||
|
|
@ -1,4 +1,2 @@
|
|||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
|
||||
POINTING_DEVICE_DRIVER = pmw3360
|
||||
32
keyboards/ploopyco/mouse/rev1_003/config.h
Normal file
32
keyboards/ploopyco/mouse/rev1_003/config.h
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
/* Copyright 2024 Colin Lam (Ploopy Corporation)
|
||||
* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
||||
* Copyright 2019 Sunjun Kim
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define UNUSABLE_PINS \
|
||||
{ GP1, GP3, GP4, GP6, GP8, GP10, GP11, GP16, GP18, GP20, GP25, GP27, GP29 }
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW33XX_LIFTOFF_DISTANCE 0x00
|
||||
#define PMW33XX_CS_PIN GP5
|
||||
#define SPI_SCK_PIN GP2
|
||||
#define SPI_MISO_PIN GP0
|
||||
#define SPI_MOSI_PIN GP7
|
||||
|
||||
#define ENCODER_A_PINS { GP26 }
|
||||
#define ENCODER_B_PINS { GP28 }
|
||||
25
keyboards/ploopyco/mouse/rev1_003/keyboard.json
Normal file
25
keyboards/ploopyco/mouse/rev1_003/keyboard.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"processor": "RP2040",
|
||||
"bootloader": "rp2040",
|
||||
"usb": {
|
||||
"device_version": "1.0.0"
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"matrix_pins": {
|
||||
"direct": [
|
||||
["GP15", "GP21", "GP23", "GP17", "GP19", "GP22", "GP14", "GP24"]
|
||||
]
|
||||
},
|
||||
"rgblight": {
|
||||
"led_count": 1,
|
||||
"max_brightness": 40,
|
||||
"animations": {
|
||||
"breathing": true,
|
||||
"rainbow_mood": true,
|
||||
"rainbow_swirl": true
|
||||
}
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "GP12"
|
||||
}
|
||||
}
|
||||
3
keyboards/ploopyco/mouse/rev1_003/readme.md
Normal file
3
keyboards/ploopyco/mouse/rev1_003/readme.md
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
See the [main readme](../readme.md) for more details.
|
||||
|
||||
This is for the R1.003+ version of the Mouse. It's easily distinguishable from the previous versions of the Mouse because it has an RP2040 on the board.
|
||||
|
|
@ -23,20 +23,11 @@
|
|||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* PMW3360 settings */
|
||||
#define ROTATIONAL_TRANSFORM_ANGLE 20
|
||||
|
||||
// If board has a debug LED, you can enable it by defining this
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW33XX Settings */
|
||||
#define PMW33XX_CS_PIN B0
|
||||
#define POINTING_DEVICE_INVERT_Y
|
||||
|
||||
|
||||
#define ENCODER_BUTTON_COL 1
|
||||
#define ENCODER_BUTTON_ROW 0
|
||||
/* Custom encoder needs to specify just how many encoders we have */
|
||||
#define NUM_ENCODERS 1
|
||||
|
||||
#define ENCODER_A_PINS { F0 }
|
||||
#define ENCODER_B_PINS { F4 }
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"keyboard_name": "Trackball",
|
||||
"manufacturer": "PloopyCo",
|
||||
"keyboard_name": "Classic Trackball",
|
||||
"manufacturer": "Ploopy",
|
||||
"url": "www.ploopy.co",
|
||||
"maintainer": "drashna",
|
||||
"usb": {
|
||||
|
|
@ -12,7 +12,6 @@
|
|||
"bootmagic": {
|
||||
"matrix": [0, 3]
|
||||
},
|
||||
|
||||
"features": {
|
||||
"bootmagic": true,
|
||||
"extrakey": true,
|
||||
|
|
|
|||
1
keyboards/ploopyco/trackball/post_rules.mk
Normal file
1
keyboards/ploopyco/trackball/post_rules.mk
Normal file
|
|
@ -0,0 +1 @@
|
|||
POINTING_DEVICE_DRIVER = pmw3360
|
||||
|
|
@ -1,27 +1,34 @@
|
|||
# Ploopyco Trackball
|
||||
# Ploopy Classic Trackball
|
||||
|
||||
|
||||
|
||||
|
||||
It's a DIY, QMK Powered Trackball!!!!
|
||||
|
||||
* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
|
||||
* Hardware Supported: ATMega32u4 8MHz(3.3v)
|
||||
* Keyboard Maintainer: [Ploopy](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
|
||||
* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040
|
||||
* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make ploopyco/trackball/rev1:default:flash
|
||||
make ploopyco/trackball/rev1_004:default:flash
|
||||
make ploopyco/trackball/rev1_005:default:flash
|
||||
|
||||
To jump to the bootloader, hold down "Button 4" (immediate right of the trackball)
|
||||
make ploopyco/trackball/rev1_007:default:flash
|
||||
|
||||
To jump to the bootloader, hold down "Button 4" (immediate right of the trackball)
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Revisions
|
||||
|
||||
There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006.
|
||||
There are three main revisions for the Ploopy Classic Trackball:
|
||||
|
||||
In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5.
|
||||
- Everything up to 1.004 (very rare)
|
||||
- Revision 1.005 and 1.006 (commonly sold between 2020 and 2024)
|
||||
- Revision 1.007 (first available in 2025)
|
||||
|
||||
In the 1.005 revision, button four was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5.
|
||||
|
||||
In the 1.007 revision, the board was switched from an ATMega32u4 architecture to the Raspberry RP2040 architecture.
|
||||
|
||||
The PCB should indicate which revision this is.
|
||||
|
||||
|
|
|
|||
|
|
@ -25,3 +25,9 @@
|
|||
|
||||
// If board has a debug LED, you can enable it by defining this
|
||||
#define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW33XX Settings */
|
||||
#define PMW33XX_CS_PIN B0
|
||||
|
||||
#define ENCODER_A_PINS { F0 }
|
||||
#define ENCODER_B_PINS { F4 }
|
||||
2
keyboards/ploopyco/trackball/rev1_004/rules.mk
Normal file
2
keyboards/ploopyco/trackball/rev1_004/rules.mk
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
|
|
@ -22,3 +22,12 @@
|
|||
// They are set as output and pulled high, by default
|
||||
#define UNUSABLE_PINS \
|
||||
{ D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 }
|
||||
|
||||
// If board has a debug LED, you can enable it by defining this
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW33XX Settings */
|
||||
#define PMW33XX_CS_PIN B0
|
||||
|
||||
#define ENCODER_A_PINS { F0 }
|
||||
#define ENCODER_B_PINS { F4 }
|
||||
|
|
|
|||
|
|
@ -1,3 +1,3 @@
|
|||
See the [main readme](../readme.md) for more details.
|
||||
See the [main readme](../readme.md) for more details.
|
||||
|
||||
This is just the rev 1.005+ trackball
|
||||
This is for the R1.005-R1.006 version of the Classic. It's easily distinguishable from the R1.007+ versions of the Classic because it has an ATmega32u4 on the board.
|
||||
2
keyboards/ploopyco/trackball/rev1_005/rules.mk
Normal file
2
keyboards/ploopyco/trackball/rev1_005/rules.mk
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
32
keyboards/ploopyco/trackball/rev1_007/config.h
Normal file
32
keyboards/ploopyco/trackball/rev1_007/config.h
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
/* Copyright 2024 Colin Lam (Ploopy Corporation)
|
||||
* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
||||
* Copyright 2019 Sunjun Kim
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define UNUSABLE_PINS \
|
||||
{ GP1, GP3, GP4, GP6, GP8, GP10, GP11, GP14, GP16, GP18, GP20, GP22, GP24, GP25, GP27, GP29 }
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW33XX_LIFTOFF_DISTANCE 0x00
|
||||
#define PMW33XX_CS_PIN GP5
|
||||
#define SPI_SCK_PIN GP2
|
||||
#define SPI_MISO_PIN GP0
|
||||
#define SPI_MOSI_PIN GP7
|
||||
|
||||
#define ENCODER_A_PINS { GP26 }
|
||||
#define ENCODER_B_PINS { GP28 }
|
||||
25
keyboards/ploopyco/trackball/rev1_007/keyboard.json
Normal file
25
keyboards/ploopyco/trackball/rev1_007/keyboard.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"processor": "RP2040",
|
||||
"bootloader": "rp2040",
|
||||
"usb": {
|
||||
"device_version": "1.0.0"
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"matrix_pins": {
|
||||
"direct": [
|
||||
["GP15", "GP21", "GP23", "GP17", "GP19"]
|
||||
]
|
||||
},
|
||||
"rgblight": {
|
||||
"led_count": 1,
|
||||
"max_brightness": 40,
|
||||
"animations": {
|
||||
"breathing": true,
|
||||
"rainbow_mood": true,
|
||||
"rainbow_swirl": true
|
||||
}
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "GP12"
|
||||
}
|
||||
}
|
||||
3
keyboards/ploopyco/trackball/rev1_007/readme.md
Normal file
3
keyboards/ploopyco/trackball/rev1_007/readme.md
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
See the [main readme](../readme.md) for more details.
|
||||
|
||||
This is for the R1.007+ version of the Classic. It's easily distinguishable from the previous versions of the Classic because it has an RP2040 on the board.
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
|
||||
POINTING_DEVICE_DRIVER = pmw3360
|
||||
|
||||
DEFAULT_FOLDER = ploopyco/trackball/rev1_005
|
||||
|
|
@ -29,9 +29,6 @@
|
|||
// If board has a debug LED, you can enable it by defining this
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define POINTING_DEVICE_CS_PIN B0
|
||||
|
||||
#define ENCODER_BUTTON_COL 1
|
||||
#define ENCODER_BUTTON_ROW 0
|
||||
|
||||
|
|
@ -41,6 +38,3 @@
|
|||
#define ENCODER_HIGH_THRES_B 90
|
||||
/* Custom encoder needs to specify just how many encoders we have */
|
||||
#define NUM_ENCODERS 1
|
||||
|
||||
#define ENCODER_A_PINS { F4 }
|
||||
#define ENCODER_B_PINS { F0 }
|
||||
|
|
|
|||
|
|
@ -1,22 +1,22 @@
|
|||
{
|
||||
"keyboard_name": "PloopyCo Thumb Trackball",
|
||||
"keyboard_name": "Thumb Trackball",
|
||||
"manufacturer": "Ploopy",
|
||||
"url": "www.ploopy.co",
|
||||
"maintainer": "ploopyco",
|
||||
"manufacturer": "Ploopy Corporation",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"usb": {
|
||||
"vid": "0x5043",
|
||||
"pid": "0x5C46",
|
||||
"device_version": "0.0.1",
|
||||
"max_power": 100
|
||||
},
|
||||
"bootmagic": {
|
||||
"matrix": [0, 3]
|
||||
},
|
||||
"features": {
|
||||
"bootmagic": true,
|
||||
"command": false,
|
||||
"console": false,
|
||||
"extrakey": true,
|
||||
"mousekey": true,
|
||||
"nkro": true,
|
||||
"nkro": false,
|
||||
"pointing_device": true,
|
||||
"encoder": true
|
||||
},
|
||||
|
|
|
|||
1
keyboards/ploopyco/trackball_thumb/post_rules.mk
Normal file
1
keyboards/ploopyco/trackball_thumb/post_rules.mk
Normal file
|
|
@ -0,0 +1 @@
|
|||
POINTING_DEVICE_DRIVER = pmw3360
|
||||
|
|
@ -3,13 +3,13 @@
|
|||
It's a DIY, QMK Powered Trackball...for thumb ballers!
|
||||
|
||||
* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
|
||||
* Hardware Supported: ATMega32u4 8MHz(3.3v)
|
||||
* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040
|
||||
* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make ploopyco/trackball_thumb/rev1_001:default:flash
|
||||
|
||||
|
||||
To jump to the bootloader, hold down "Button 4" (button closest to the USB port).
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
|
|||
|
|
@ -22,3 +22,9 @@
|
|||
// They are set as output and pulled high, by default
|
||||
#define UNUSABLE_PINS \
|
||||
{ D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 }
|
||||
|
||||
/* PMW33XX Settings */
|
||||
#define PMW33XX_CS_PIN B0
|
||||
|
||||
#define ENCODER_A_PINS { F0 }
|
||||
#define ENCODER_B_PINS { F4 }
|
||||
|
|
|
|||
|
|
@ -1,13 +1,14 @@
|
|||
{
|
||||
"usb": {
|
||||
"device_version": "1.0.0"
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"matrix_pins": {
|
||||
"direct": [
|
||||
["D5", "B6", "D4", "D2", "E6", "D7"]
|
||||
]
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "B5"
|
||||
},
|
||||
"rgblight": {
|
||||
"led_count": 3,
|
||||
"max_brightness": 40,
|
||||
|
|
@ -16,8 +17,5 @@
|
|||
"rainbow_mood": true,
|
||||
"rainbow_swirl": true
|
||||
}
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "B5"
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,3 +1,3 @@
|
|||
This is the R1.001+ version of the Thumb. Future versions may have other features.
|
||||
See the [main readme](../readme.md) for more details.
|
||||
|
||||
See the [main readme](../readme.md) for more details.
|
||||
This is for the R1.001 version of the Thumb. It's easily distinguishable from the R1.002+ versions of the Thumb because it has an ATmega32u4 on the board.
|
||||
2
keyboards/ploopyco/trackball_thumb/rev1_001/rules.mk
Normal file
2
keyboards/ploopyco/trackball_thumb/rev1_001/rules.mk
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
32
keyboards/ploopyco/trackball_thumb/rev1_002/config.h
Normal file
32
keyboards/ploopyco/trackball_thumb/rev1_002/config.h
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
/* Copyright 2024 Colin Lam (Ploopy Corporation)
|
||||
* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
||||
* Copyright 2019 Sunjun Kim
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define UNUSABLE_PINS \
|
||||
{ GP1, GP3, GP4, GP6, GP8, GP10, GP11, GP14, GP18, GP20, GP22, GP24, GP25, GP27, GP29 }
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW33XX_LIFTOFF_DISTANCE 0x00
|
||||
#define PMW33XX_CS_PIN GP5
|
||||
#define SPI_SCK_PIN GP2
|
||||
#define SPI_MISO_PIN GP0
|
||||
#define SPI_MOSI_PIN GP7
|
||||
|
||||
#define ENCODER_A_PINS { GP28 }
|
||||
#define ENCODER_B_PINS { GP26 }
|
||||
25
keyboards/ploopyco/trackball_thumb/rev1_002/keyboard.json
Normal file
25
keyboards/ploopyco/trackball_thumb/rev1_002/keyboard.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"processor": "RP2040",
|
||||
"bootloader": "rp2040",
|
||||
"usb": {
|
||||
"device_version": "1.0.0"
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"matrix_pins": {
|
||||
"direct": [
|
||||
["GP17", "GP16", "GP15", "GP21", "GP23", "GP19"]
|
||||
]
|
||||
},
|
||||
"rgblight": {
|
||||
"led_count": 1,
|
||||
"max_brightness": 40,
|
||||
"animations": {
|
||||
"breathing": true,
|
||||
"rainbow_mood": true,
|
||||
"rainbow_swirl": true
|
||||
}
|
||||
},
|
||||
"ws2812": {
|
||||
"pin": "GP12"
|
||||
}
|
||||
}
|
||||
3
keyboards/ploopyco/trackball_thumb/rev1_002/readme.md
Normal file
3
keyboards/ploopyco/trackball_thumb/rev1_002/readme.md
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
See the [main readme](../readme.md) for more details.
|
||||
|
||||
This is for the R1.002+ version of the Thumb. It's easily distinguishable from the previous versions of the Thumb because it has an RP2040 on the board.
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
|
||||
POINTING_DEVICE_DRIVER = pmw3360
|
||||
|
||||
DEFAULT_FOLDER = ploopyco/trackball_thumb/rev1_001
|
||||
Loading…
Add table
Add a link
Reference in a new issue