[Keyboard] Nebula12 keyboard (#9397)

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>

keyboards/nebula12/config.h

@@ -0,0 +1,169 @@
+/*
+Copyright 2020 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x8968
+#define PRODUCT_ID      0x5337
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Yiancar-Designs
+#define PRODUCT         NEBULA12
+#define DESCRIPTION     "A 12-key, tool-free RGB keyboard"
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+#define MATRIX_ROW_PINS { A8, C15, A0, A1 }
+#define MATRIX_COL_PINS { A9, C13, C14 }
+// To enable debugger set A13 A14 -> A5 A7
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Setting up 400KHz I2C Clock for a 48MHz system clock */
+#define I2C1_SCL_PAL_MODE 1
+#define I2C1_SDA_PAL_MODE 1
+#define I2C1_TIMINGR_SCLDEL 3U
+#define I2C1_TIMINGR_SDADEL 1U
+#define I2C1_TIMINGR_SCLH 3U
+#define I2C1_TIMINGR_SCLL 9U
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+#define WS2812_SPI SPID2 // default: SPID1
+#define WS2812_SPI_MOSI_PAL_MODE 0 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+
+#define RGB_DI_PIN B15
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 4
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
+/* Backlight options */
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+#define RGB_BACKLIGHT_NEBULA12
+
+// they aren't really used if RGB_BACKLIGHT_NEBULA65 defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 6
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+#define DRIVER_COUNT 1
+#define DRIVER_LED_TOTAL 16
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
+
+// VIA lighting is handled by the keyboard-level code
+#define VIA_CUSTOM_LIGHTING_ENABLE
+#define VIA_QMK_RGBLIGHT_ENABLE