Complete TPI protocol code to enter and exit TPI programming mode for the ATTINY 6-pin devices.
This commit is contained in:
parent
65fcebf478
commit
35dac470f2
4 changed files with 36 additions and 38 deletions
|
@ -38,44 +38,35 @@
|
|||
|
||||
#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
|
||||
|
||||
/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
|
||||
* calculation.
|
||||
/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
|
||||
*
|
||||
* \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
|
||||
*/
|
||||
bool XMEGANVM_WaitWhileNVMBusBusy(void)
|
||||
bool TINYNVM_WaitWhileNVMBusBusy(void)
|
||||
{
|
||||
// TODO
|
||||
TCNT0 = 0;
|
||||
TIFR0 = (1 << OCF1A);
|
||||
|
||||
uint8_t TimeoutMS = TINY_NVM_BUSY_TIMEOUT_MS;
|
||||
|
||||
/* Poll the STATUS register to check to see if NVM access has been enabled */
|
||||
while (TimeoutMS)
|
||||
{
|
||||
/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
|
||||
XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
|
||||
if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
|
||||
return true;
|
||||
|
||||
if (TIFR0 & (1 << OCF1A))
|
||||
{
|
||||
TIFR0 = (1 << OCF1A);
|
||||
TimeoutMS--;
|
||||
}
|
||||
}
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
/** Waits while the target's NVM controller is busy performing an operation, exiting if the
|
||||
* timeout period expires.
|
||||
*
|
||||
* \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
|
||||
*/
|
||||
bool XMEGANVM_WaitWhileNVMControllerBusy(void)
|
||||
{
|
||||
// TODO
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
/** Retrieves the CRC value of the given memory space.
|
||||
*
|
||||
* \param[in] CRCCommand NVM CRC command to issue to the target
|
||||
* \param[out] CRCDest CRC Destination when read from the target
|
||||
*
|
||||
* \return Boolean true if the command sequence complete successfully
|
||||
*/
|
||||
bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
|
||||
{
|
||||
// TODO
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
/** Reads memory from the target's memory spaces.
|
||||
*
|
||||
* \param[in] ReadAddress Start address to read from within the target's address space
|
||||
|
@ -84,7 +75,7 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
|
|||
*
|
||||
* \return Boolean true if the command sequence complete successfully
|
||||
*/
|
||||
bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
|
||||
bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
|
||||
{
|
||||
// TODO
|
||||
|
||||
|
@ -99,7 +90,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const
|
|||
*
|
||||
* \return Boolean true if the command sequence complete successfully
|
||||
*/
|
||||
bool XMEGANVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
|
||||
bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
|
||||
{
|
||||
// TODO
|
||||
|
||||
|
@ -113,7 +104,7 @@ bool XMEGANVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddres
|
|||
*
|
||||
* \return Boolean true if the command sequence complete successfully
|
||||
*/
|
||||
bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
|
||||
bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
|
||||
{
|
||||
// TODO
|
||||
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue