ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros.

Browse source
This commit is contained in:
Dean Camera 2012-05-10 19:24:58 +00:00
parent e8570c4a37
commit 359fbfe14d
395 changed files with 9912 additions and 2756 deletions
Download patch file Download diff file Expand all files Collapse all files

9
Demos/Device/LowLevel/AudioInput/AudioInput.c
View file

@ -118,8 +118,7 @@ void EVENT_USB_Device_ConfigurationChanged(void)
bool ConfigSuccess = true;
/* Setup Audio Stream Endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS, ENDPOINT_DIR_IN,
AUDIO_STREAM_EPSIZE, ENDPOINT_BANK_DOUBLE);
ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2);
/* Indicate endpoint configuration success or failure */
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
@ -165,7 +164,7 @@ void EVENT_USB_Device_ControlRequest(void)
uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
{
uint8_t SampleRate[3];
@ -190,7 +189,7 @@ void EVENT_USB_Device_ControlRequest(void)
uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
{
uint8_t SampleRate[3];
@ -215,7 +214,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
/* Select the audio stream endpoint */
Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM);
Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR);
/* Check if the current endpoint can be written to and that the audio interface is enabled */
if (Endpoint_IsINReady() && StreamingAudioInterfaceSelected)

2
Demos/Device/LowLevel/AudioInput/Descriptors.c
View file

@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
.EndpointAddress = (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM),
.EndpointAddress = AUDIO_STREAM_EPADDR,
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 0x01

11
Demos/Device/LowLevel/AudioInput/Descriptors.h
View file

@ -42,14 +42,11 @@
#include <avr/pgmspace.h>
/* Macros: */
/** Endpoint number of the Audio isochronous streaming data endpoint. */
#define AUDIO_STREAM_EPNUM 1
/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1)
/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires
* at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller
* USB AVR models will result in unavoidable distorted output.
*/
#define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM)
/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
#define AUDIO_STREAM_EPSIZE 256
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the