ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Remove warnings in the documentation for the library class drivers about sequential pipe/endpoint allocation, as by default this is no longer as issue (unless ORDERED_EP_CONFIG is specified).

Browse source
This commit is contained in:
Dean Camera 2011-06-08 01:32:44 +00:00
parent e572ee7ff2
commit 34164a5550
15 changed files with 11 additions and 67 deletions
Download patch file Download diff file Expand all files Collapse all files

20
LUFA/Drivers/USB/Class/Host/Printer.h
View file

@ -114,24 +114,12 @@
};
/* Function Prototypes: */
/** General management task for a given Printer host class interface, required for the correct operation of
* the interface. This should be called frequently in the main program loop, before the master USB management task
* \ref USB_USBTask().
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
*/
void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Host interface configuration routine, to configure a given Printer host interface instance using the
* Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer
* instance's state values and configures the pipes required to communicate with the interface if it is found within
* the device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state.
*
* \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other
* interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes
* within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor.
@ -142,6 +130,14 @@
uint16_t ConfigDescriptorSize,
void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
/** General management task for a given Printer host class interface, required for the correct operation of
* the interface. This should be called frequently in the main program loop, before the master USB management task
* \ref USB_USBTask().
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
*/
void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called
* once the connected device's configuration has been set, to ensure the printer is ready to accept commands.
*