ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Converted device mode low-level demos to schedulerless.

Browse source
This commit is contained in:
Dean Camera 2009-06-07 07:20:33 +00:00
parent 2793c88fc6
commit 33a0184749
44 changed files with 590 additions and 1134 deletions
Download patch file Download diff file Expand all files Collapse all files

77
Demos/Device/LowLevel/MIDI/MIDI.c
View file

@ -36,17 +36,24 @@
#include "MIDI.h"
/* Scheduler Task List */
TASK_LIST
{
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_MIDI_Task , .TaskStatus = TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
MIDI_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
@ -59,28 +66,14 @@ int main(void)
Joystick_Init();
LEDs_Init();
Buttons_Init();
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
/* Initialize Scheduler so that it can be used */
Scheduler_Init();
/* Initialize USB Subsystem */
USB_Init();
/* Scheduling - routine never returns, so put this last in the main function */
Scheduler_Start();
}
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
@ -88,12 +81,8 @@ void EVENT_USB_Connect(void)
*/
void EVENT_USB_Disconnect(void)
{
/* Stop running audio and USB management tasks */
Scheduler_SetTaskMode(USB_MIDI_Task, TASK_STOP);
Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
@ -111,16 +100,13 @@ void EVENT_USB_ConfigurationChanged(void)
ENDPOINT_BANK_SINGLE);
/* Indicate USB connected and ready */
UpdateStatus(Status_USBReady);
/* Start MIDI task */
Scheduler_SetTaskMode(USB_MIDI_Task, TASK_RUN);
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them
* to the host.
*/
TASK(USB_MIDI_Task)
void MIDI_Task(void)
{
static uint8_t PrevJoystickStatus;
@ -164,33 +150,6 @@ TASK(USB_MIDI_Task)
Endpoint_ClearOUT();
}
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
* log to a serial port, or anything else that is suitable for status updates.
*
* \param CurrentStatus Current status of the system, from the MIDI_StatusCodes_t enum
*/
void UpdateStatus(uint8_t CurrentStatus)
{
uint8_t LEDMask = LEDS_NO_LEDS;
/* Set the LED mask to the appropriate LED mask based on the given status code */
switch (CurrentStatus)
{
case Status_USBNotReady:
LEDMask = (LEDS_LED1);
break;
case Status_USBEnumerating:
LEDMask = (LEDS_LED1 | LEDS_LED2);
break;
case Status_USBReady:
LEDMask = (LEDS_LED2 | LEDS_LED4);
break;
}
/* Set the board LEDs to the new LED mask */
LEDs_SetAllLEDs(LEDMask);
}
/** Sends a MIDI note change event (note on or off) to the MIDI output jack, on the given virtual cable ID and channel.
*
* \param Pitch Pitch of the note to turn on or off

34
Demos/Device/LowLevel/MIDI/MIDI.h
View file

@ -44,12 +44,11 @@
#include "Descriptors.h"
#include <LUFA/Version.h> // Library Version Information
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include <LUFA/Drivers/Board/Joystick.h> // Joystick driver
#include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
#include <LUFA/Drivers/Board/Buttons.h> // Board Buttons driver
#include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
#include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
/* Macros: */
/** MIDI command for a note on (activation) event */
@ -68,19 +67,22 @@
*/
#define MIDI_CHANNEL(channel) (channel - 1)
/* Enums: */
/** Enum for the possible status codes for passing to the UpdateStatus() function. */
enum MIDI_StatusCodes_t
{
Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB host) */
Status_USBEnumerating = 1, /**< USB interface is enumerating */
Status_USBReady = 2, /**< USB interface is connected and ready */
};
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/* Task Definitions: */
TASK(USB_MIDI_Task);
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void MIDI_Task(void);
void EVENT_USB_Connect(void);
void EVENT_USB_Disconnect(void);
void EVENT_USB_ConfigurationChanged(void);

4
Demos/Device/LowLevel/MIDI/makefile
View file

@ -119,13 +119,12 @@ OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../..
LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Descriptors.c \
$(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
@ -136,7 +135,6 @@ SRC = $(TARGET).c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
$(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)