ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Fix spacing of the function parameter descriptions in the Doxygen documentation.

Browse source
This commit is contained in:
Dean Camera 2010-05-29 08:08:26 +00:00
parent c1daecf18b
commit 328ed71ce7
21 changed files with 163 additions and 163 deletions
Download patch file Download diff file Expand all files Collapse all files

10
LUFA/Common/Common.h
View file

@ -118,7 +118,7 @@
*
* \ingroup Group_BitManip
*
* \param[in] Byte Byte of data whose bits are to be reversed
* \param[in] Byte Byte of data whose bits are to be reversed
*/
static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
static inline uint8_t BitReverse(uint8_t Byte)
@ -134,7 +134,7 @@
*
* \ingroup Group_BitManip
*
* \param[in] Word Word of data whose bytes are to be swapped
* \param[in] Word Word of data whose bytes are to be swapped
*/
static inline uint16_t SwapEndian_16(uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
static inline uint16_t SwapEndian_16(uint16_t Word)
@ -146,7 +146,7 @@
*
* \ingroup Group_BitManip
*
* \param[in] DWord Double word of data whose bytes are to be swapped
* \param[in] DWord Double word of data whose bytes are to be swapped
*/
static inline uint32_t SwapEndian_32(uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
static inline uint32_t SwapEndian_32(uint32_t DWord)
@ -161,8 +161,8 @@
*
* \ingroup Group_BitManip
*
* \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed
* \param[in] Bytes Length of the data in bytes
* \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed
* \param[in] Bytes Length of the data in bytes
*/
static inline void SwapEndian_n(void* Data, uint8_t Bytes);
static inline void SwapEndian_n(void* Data, uint8_t Bytes)

2
LUFA/Drivers/Board/LEDs.h
View file

@ -167,7 +167,7 @@
/** Toggles all LEDs in the LED mask, leaving all others in their current states.
*
* \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
* \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
*/
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);

2
LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
View file

@ -110,7 +110,7 @@
/** Receives a byte from the currently addressed device on the TWI bus.
*
* \param[in] Byte Location where the read byte is to be stored
* \param[in] Byte Location where the read byte is to be stored
* \param[in] LastByte Indicates if the byte should be ACKed if false, NAKed if true
*
* \return Boolean true if the byte reception sucessfully completed, false otherwise

2
LUFA/Drivers/Peripheral/SPI.h
View file

@ -153,7 +153,7 @@
/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
* byte sent to from the attached SPI device is ignored.
*
* \param[in] Byte Byte to send through the SPI interface
* \param[in] Byte Byte to send through the SPI interface
*/
static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void SPI_SendByte(const uint8_t Byte)

12
LUFA/Drivers/USB/Class/Device/CDC.h
View file

@ -206,9 +206,9 @@
* \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
* the call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in] Data Pointer to the string to send to the host
* \param[in] Length Size in bytes of the string to send to the host
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in] Data Pointer to the string to send to the host
* \param[in] Length Size in bytes of the string to send to the host
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum
*/
@ -224,7 +224,7 @@
* the call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in] Data Byte of data to send to the host
* \param[in] Data Byte of data to send to the host
*
* \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum
*/
@ -290,7 +290,7 @@
* to the given CDC interface.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);
@ -298,7 +298,7 @@
* the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);

22
LUFA/Drivers/USB/Class/Device/HID.h
View file

@ -153,12 +153,12 @@
* user is responsible for the creation of the next HID input report to be sent to the host.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state
* \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero, this should
* be set to the report ID of the generated HID input report (if any). If multiple reports are not sent via the
* given HID interface, this parameter should be ignored.
* \param[in] ReportType Type of HID report to generate, either \ref REPORT_ITEM_TYPE_In or \ref REPORT_ITEM_TYPE_Feature
* \param[out] ReportData Pointer to a buffer where the generated HID report should be stored
* \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent
* \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero,
* this should be set to the report ID of the generated HID input report (if any). If multiple
* reports are not sent via the given HID interface, this parameter should be ignored.
* \param[in] ReportType Type of HID report to generate, either \ref REPORT_ITEM_TYPE_In or \ref REPORT_ITEM_TYPE_Feature
* \param[out] ReportData Pointer to a buffer where the generated HID report should be stored
* \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent
*
* \return Boolean true to force the sending of the report even if it is identical to the previous report and still within
* the idle period (useful for devices which report relative movement), false otherwise
@ -172,11 +172,11 @@
* the user is responsible for the processing of the received HID output report from the host.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state
* \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID
* interface, this parameter should be ignored.
* \param[in] ReportType Type of received HID report, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] ReportData Pointer to a buffer where the received HID report is stored.
* \param[in] ReportSize Size in bytes of the received report from the host.
* \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID
* interface, this parameter should be ignored.
* \param[in] ReportType Type of received HID report, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] ReportData Pointer to a buffer where the received HID report is stored.
* \param[in] ReportSize Size in bytes of the received report from the host.
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, const uint8_t ReportID,
const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1)

4
LUFA/Drivers/USB/Class/Device/MIDI.h
View file

@ -120,7 +120,7 @@
* the call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum
*/
@ -144,7 +144,7 @@
* the call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
*
* \return Boolean true if a MIDI event packet was received, false otherwise
*/

16
LUFA/Drivers/USB/Class/Host/CDC.h
View file

@ -161,9 +161,9 @@
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref CDCHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -209,8 +209,8 @@
* call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
* \param[in] Data Pointer to the string to send to the device
* \param[in] Length Size in bytes of the string to send to the device
* \param[in] Data Pointer to the string to send to the device
* \param[in] Length Size in bytes of the string to send to the device
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -226,7 +226,7 @@
* call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
* \param[in] Data Byte of data to send to the device
* \param[in] Data Byte of data to send to the device
*
* \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum
*/
@ -275,7 +275,7 @@
* to the given CDC interface.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream);
@ -283,7 +283,7 @@
* the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream);

20
LUFA/Drivers/USB/Class/Host/HID.h
View file

@ -155,9 +155,9 @@
* \note Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
* to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref HIDHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -175,7 +175,7 @@
* can generate.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] Buffer Buffer to store the received report into
* \param[in] Buffer Buffer to store the received report into
*
* \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -192,8 +192,8 @@
* \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch
* \param[in] Buffer Buffer to store the received report into
* \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch
* \param[in] Buffer Buffer to store the received report into
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
*/
@ -212,10 +212,10 @@
* from the parameter list of this function.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs
* \param[in] ReportType Type of report to issue to the device, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] Buffer Buffer containing the report to send to the attached device
* \param[in] ReportSize Report size in bytes to send to the attached device
* \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs
* \param[in] ReportType Type of report to issue to the device, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] Buffer Buffer containing the report to send to the attached device
* \param[in] ReportSize Report size in bytes to send to the attached device
*
* \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in
* the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise

12
LUFA/Drivers/USB/Class/Host/HIDParser.h
View file

@ -134,7 +134,7 @@
* leftwards until the data's sign bit is in the correct position.
*
* \param[in] reportitem HID Report Item whose retrieved value is to be aligned
* \param[in] type Data type to align the HID report item's value to
* \param[in] type Data type to align the HID report item's value to
*
* \return Left-aligned data of the given report item's pre-retrived value for the given datatype
*/
@ -272,8 +272,8 @@
/** Function to process a given HID report returned from an attached device, and store it into a given
* \ref HID_ReportInfo_t structure.
*
* \param[in] ReportData Buffer containing the device's HID report table
* \param[in] ReportSize Size in bytes of the HID report table
* \param[in] ReportData Buffer containing the device's HID report table
* \param[in] ReportSize Size in bytes of the HID report table
* \param[out] ParserData Pointer to a \ref HID_ReportInfo_t instance for the parser output
*
* \return A value in the \ref HID_Parse_ErrorCodes_t enum
@ -287,7 +287,7 @@
* When called, this copies the report item's Value element to it's PreviousValue element for easy
* checking to see if an item's value has changed before processing a report.
*
* \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device
* \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device
* \param[in,out] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array
*
* \returns Boolean true if the item to retrieve was located in the given report, false otherwise
@ -306,7 +306,7 @@
* If the device has multiple HID reports, the first byte in the report is set to the report ID of the given item.
*
* \param[out] ReportData Buffer holding the current OUT or FEATURE report data
* \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array
* \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array
*/
void USB_SetHIDReportItemInfo(uint8_t* ReportData, HID_ReportItem_t* const ReportItem)
ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
@ -314,7 +314,7 @@
/** Retrieves the size of a given HID report in bytes from it's Report ID.
*
* \param[in] ParserData Pointer to a \ref HID_ReportInfo_t instance containing the parser output
* \param[in] ReportID Report ID of the report whose size is to be retrieved
* \param[in] ReportID Report ID of the report whose size is to be retrieved
* \param[in] ReportType Type of the report whose size is to be determined, a valued from the
* \ref HID_ReportItemTypes_t enum
*

10
LUFA/Drivers/USB/Class/Host/MIDI.h
View file

@ -119,9 +119,9 @@
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref MIDIHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -134,7 +134,7 @@
* call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -158,7 +158,7 @@
* call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
*
* \return Boolean true if a MIDI event packet was received, false otherwise
*/

46
LUFA/Drivers/USB/Class/Host/MassStorage.h
View file

@ -137,9 +137,9 @@
* is found within the device. This should be called once after the stack has enumerated the attached device, while
* the host state machine is in the Addressed state.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref MSHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -164,7 +164,7 @@
* if the device STALLs the request.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored
* \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
*/
@ -178,8 +178,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] InquiryData Location where the read inquiry data should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] InquiryData Location where the read inquiry data should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED
*/
@ -190,7 +190,7 @@
/** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] LUNIndex LUN index within the device the command is being issued to
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
@ -203,8 +203,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
@ -219,8 +219,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] SenseData Pointer to the location where the sense information should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] SenseData Pointer to the location where the sense information should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
@ -235,8 +235,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
@ -249,11 +249,11 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to read from
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[out] BlockBuffer Pointer to where the read data from the device should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to read from
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[out] BlockBuffer Pointer to where the read data from the device should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
@ -267,11 +267,11 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to write to
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[in] BlockBuffer Pointer to where the data to write should be sourced from
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to write to
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[in] BlockBuffer Pointer to where the data to write should be sourced from
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/

16
LUFA/Drivers/USB/Class/Host/Printer.h
View file

@ -120,9 +120,9 @@
* the device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -142,7 +142,7 @@
* PRNT_PORTSTATUS_* macros to determine the printer port's status.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[out] PortStatus Location where the retrieved port status should be stored
* \param[out] PortStatus Location where the retrieved port status should be stored
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
*/
@ -165,8 +165,8 @@
* call will fail.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer
* \param[in] CommandSize Size in bytes of the command stream to be sent
* \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer
* \param[in] CommandSize Size in bytes of the command stream to be sent
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -181,8 +181,8 @@
* This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format
* \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string
* \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format
* \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/

26
LUFA/Drivers/USB/Class/Host/RNDIS.h
View file

@ -138,9 +138,9 @@
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref RNDISHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -170,9 +170,9 @@
/** Sets a given RNDIS property of an attached RNDIS device.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] Oid OID number of the parameter to set
* \param[in] Buffer Pointer to where the property data is to be sourced from
* \param[in] Length Length in bytes of the property data to sent to the device
* \param[in] Oid OID number of the parameter to set
* \param[in] Buffer Pointer to where the property data is to be sourced from
* \param[in] Length Length in bytes of the property data to sent to the device
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
* logical command failure
@ -183,9 +183,9 @@
/** Gets a given RNDIS property of an attached RNDIS device.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] Oid OID number of the parameter to get
* \param[in] Buffer Pointer to where the property data is to be written to
* \param[in] MaxLength Length in bytes of the destination buffer size
* \param[in] Oid OID number of the parameter to get
* \param[in] Buffer Pointer to where the property data is to be written to
* \param[in] MaxLength Length in bytes of the destination buffer size
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
* logical command failure
@ -212,8 +212,8 @@
* call will fail.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[out] Buffer Pointer to a buffer where the packer data is to be written to
* \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored
* \param[out] Buffer Pointer to a buffer where the packer data is to be written to
* \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -226,8 +226,8 @@
* call will fail.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] Buffer Pointer to a buffer where the packer data is to be read from
* \param[in] PacketLength Length in bytes of the packet to send
* \param[in] Buffer Pointer to a buffer where the packer data is to be read from
* \param[in] PacketLength Length in bytes of the packet to send
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/

26
LUFA/Drivers/USB/Class/Host/StillImage.h
View file

@ -134,9 +134,9 @@
* found within the device. This should be called once after the stack has enumerated the attached device, while
* the host state machine is in the Addressed state.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref SIHost_EnumerationFailure_ErrorCodes_t enum
*/
@ -176,7 +176,7 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent
* \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -189,7 +189,7 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored
* \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -201,9 +201,9 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] Operation PIMA operation code to issue to the device
* \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block
* \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block
* \param[in] Operation PIMA operation code to issue to the device
* \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block
* \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
* returned a logical command failure
@ -241,7 +241,7 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored
* \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
* returned a logical command failure
@ -257,8 +257,8 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] Buffer Pointer to a buffer where the data to send has been stored
* \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device
* \param[in] Buffer Pointer to a buffer where the data to send has been stored
* \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
@ -272,8 +272,8 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[out] Buffer Pointer to a buffer where the received data is to be stored
* \param[in] Bytes Length in bytes of the data to read
* \param[out] Buffer Pointer to a buffer where the received data is to be stored
* \param[in] Bytes Length in bytes of the data to read
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/

32
LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
View file

@ -134,9 +134,9 @@
*
* \note This function is available in USB Host mode only.
*
* \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor
* \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor
* \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor
* \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor
*
* \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum
*
@ -203,11 +203,11 @@
/** Retrieves the configuration descriptor data from an attached device via a standard request into a buffer,
* including validity and size checking to prevent a buffer overflow.
*
* \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for
* single configuration devices)
* \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for
* single configuration devices)
* \param[in,out] ConfigSizePtr Pointer to a uint16_t for storing the retrieved configuration descriptor size
* \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data.
* \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored
* \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data.
* \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored
*
* \return A value from the \ref USB_Host_GetConfigDescriptor_ErrorCodes_t enum
*/
@ -217,9 +217,9 @@
/** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value.
* The bytes remaining value is automatically decremented.
*
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor
* \param[in] Type Descriptor type value to search for
* \param[in] Type Descriptor type value to search for
*/
void USB_GetNextDescriptorOfType(uint16_t* const BytesRem,
void** const CurrConfigLoc,
@ -231,10 +231,10 @@
* descriptor is reached first, the number of bytes remaining to process is set to zero and the
* function exits. The bytes remaining value is automatically decremented.
*
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor
* \param[in] Type Descriptor type value to search for
* \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor
* \param[in] Type Descriptor type value to search for
* \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor
*/
void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem,
void** const CurrConfigLoc,
@ -246,10 +246,10 @@
* which must come after a descriptor of the second given type value. The bytes remaining value is
* automatically decremented.
*
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor
* \param[in] Type Descriptor type value to search for
* \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor
* \param[in] Type Descriptor type value to search for
* \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor
*/
void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem,
void** const CurrConfigLoc,
@ -261,7 +261,7 @@
/** Skips over the current sub-descriptor inside the configuration descriptor, so that the pointer then
points to the next sub-descriptor. The bytes remaining value is automatically decremented.
*
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor
*/
static inline void USB_GetNextDescriptor(uint16_t* const BytesRem,

4
LUFA/Drivers/USB/HighLevel/Events.h
View file

@ -154,8 +154,8 @@
/** Event for USB device enumeration failure. This event fires when a the USB interface is
* in host mode, and an attached USB device has failed to enumerate completely.
*
* \param[in] ErrorCode Error code indicating the failure reason, a value in
* \ref USB_Host_EnumerationErrorCodes_t
* \param[in] ErrorCode Error code indicating the failure reason, a value in
* \ref USB_Host_EnumerationErrorCodes_t
*
* \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the
* ErrorCode parameter indicates a control error, this will give the error

24
LUFA/Drivers/USB/LowLevel/Device.h
View file

@ -186,18 +186,18 @@
* index and language ID. This function MUST be overridden in the user application (added with full, identical
* prototype and name so that the library can call it to retrieve descriptor data.
*
* \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the
* lower byte (when more than one descriptor of the given type exists, such as the
* case of string descriptors). The type may be one of the standard types defined
* in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
* \param[in] wIndex The language ID of the string to return if the wValue type indicates DTYPE_String,
* otherwise zero for standard descriptors, or as defined in a class-specific
* standards.
* \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to
* the address of the descriptor.
* \param[out] MemoryAddressSpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory
* space in which the descriptor is stored. This parameter does not exist when one
* of the USE_*_DESCRIPTORS compile time options is used.
* \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the
* lower byte (when more than one descriptor of the given type exists, such as the
* case of string descriptors). The type may be one of the standard types defined
* in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
* \param[in] wIndex The language ID of the string to return if the wValue type indicates DTYPE_String,
* otherwise zero for standard descriptors, or as defined in a class-specific
* standards.
* \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to
* the address of the descriptor.
* \param[out] MemoryAddressSpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory
* space in which the descriptor is stored. This parameter does not exist when one
* of the USE_*_DESCRIPTORS compile time options is used.
*
* \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute.
* If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to

8
LUFA/Drivers/USB/LowLevel/Endpoint.h
View file

@ -1124,7 +1124,7 @@
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
@ -1144,7 +1144,7 @@
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
@ -1167,7 +1167,7 @@
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
@ -1187,7 +1187,7 @@
* \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/

6
LUFA/Drivers/USB/LowLevel/Host.h
View file

@ -222,9 +222,9 @@
*
* \note After this routine returns, the control pipe will be selected.
*
* \param[in] Index Index of the string index to retrieve
* \param[out] Buffer Pointer to the destination buffer where the retrieved string decriptor is
* to be stored
* \param[in] Index Index of the string index to retrieve
* \param[out] Buffer Pointer to the destination buffer where the retrieved string decriptor is
* to be stored
* \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.

26
LUFA/Drivers/USB/LowLevel/Pipe.h
View file

@ -845,7 +845,7 @@
*
* \ingroup Group_PipeStreamRW
*
* \param[in] Length Number of bytes to send via the currently selected pipe.
* \param[in] Length Number of bytes to send via the currently selected pipe.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
@ -965,9 +965,9 @@
*
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
@ -977,9 +977,9 @@
*
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
@ -1000,9 +1000,9 @@
*
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
@ -1012,9 +1012,9 @@
*
* \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/