[Keyboard] Add Wampus (#10991)

* Configure new keyboard zoo/wampus

* Apply suggestions from code review

Update LED pins to defined defaults

Co-authored-by: Joel Challis <git@zvecr.com>

* Apply suggestions from code review

- Remove unused layers from default.
- Remove chibios patch comment

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

keyboards/zoo/wampus/config.h

@@ -0,0 +1,95 @@
+/*
+Copyright 2020 Matthew Tso (zoo)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x0200
+#define PRODUCT_ID   0xE600
+#define DEVICE_VER   0x0001
+#define MANUFACTURER zoo.haus
+#define PRODUCT      Wampus
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { C13, C14, A5, A4, A3 }
+#define MATRIX_COL_PINS { A10, A9, A8, B12, A15, A13, A7, A2, A1, A0, F1, F0, B3, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B0
+#define LED_CAPS_LOCK_PIN B8
+#define LED_SCROLL_LOCK_PIN B9
+
+// In-switch LED defines
+#define BACKLIGHT_PIN           A6
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_BREATHING
+
+#define BACKLIGHT_PWM_DRIVER    PWMD3
+#define BACKLIGHT_PWM_CHANNEL 1
+#define BACKLIGHT_PAL_MODE      1
+
+// RGB Underglow WS2812 Matrix defines
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN B15
+#define RGBLED_NUM 20
+// SPI RGB Driver
+#define WS2812_SPI SPID2
+#define WS2812_SPI_MOSI_PAL_MODE 0
+
+// OLED defines
+#define OLED_TIMEOUT 60000
+/* Both pins are in bank B */
+#define I2C1_SCL 6 // B6
+#define I2C1_SDA 7 // B7
+#define I2C1_SCL_PAL_MODE 1
+#define I2C1_SDA_PAL_MODE 1
+/* This configures the I2C clock to 400khz assuming a 48Mhz clock */
+#define I2C1_TIMINGR_PRESC 	0U
+#define I2C1_TIMINGR_SCLDEL 3U
+#define I2C1_TIMINGR_SDADEL 1U
+#define I2C1_TIMINGR_SCLH 	3U
+#define I2C1_TIMINGR_SCLL   9U
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION