ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed.

Browse source
This commit is contained in:
Dean Camera 2012-04-01 13:39:04 +00:00
parent 89f16f5d7f
commit 25ac76a251
8 changed files with 36 additions and 29 deletions
Download patch file Download diff file Expand all files Collapse all files

4
Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
View file

@ -73,7 +73,7 @@ void ISPProtocol_EnterISPMode(void)
/* Continuously attempt to synchronize with the target until either the number of attempts specified
* by the host has exceeded, or the the device sends back the expected response values */
while (Enter_ISP_Params.SynchLoops-- && !(TimeoutExpired))
while (Enter_ISP_Params.SynchLoops-- && TimeoutTicksRemaining)
{
uint8_t ResponseBytes[4];
@ -523,7 +523,7 @@ void ISPProtocol_SPIMulti(void)
*/
void ISPProtocol_DelayMS(uint8_t DelayMS)
{
while (DelayMS-- && !(TimeoutExpired))
while (DelayMS-- && TimeoutTicksRemaining)
Delay_MS(1);
}

12
Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
View file

@ -254,7 +254,7 @@ uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte)
TCNT1 = 0;
TCCR1B = ((1 << WGM12) | (1 << CS11));
while (SoftSPI_BitsRemaining && !(TimeoutExpired));
while (SoftSPI_BitsRemaining && TimeoutTicksRemaining);
TCCR1B = 0;
return SoftSPI_Data;
@ -296,9 +296,9 @@ uint8_t ISPTarget_WaitWhileTargetBusy(void)
ISPTarget_SendByte(0x00);
ISPTarget_SendByte(0x00);
}
while ((ISPTarget_ReceiveByte() & 0x01) && !(TimeoutExpired));
while ((ISPTarget_ReceiveByte() & 0x01) && TimeoutTicksRemaining);
return (TimeoutExpired) ? STATUS_RDY_BSY_TOUT : STATUS_CMD_OK;
return (TimeoutTicksRemaining > 0) ? STATUS_CMD_OK : STATUS_RDY_BSY_TOUT;
}
/** Sends a low-level LOAD EXTENDED ADDRESS command to the target, for addressing of memory beyond the
@ -348,10 +348,10 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
ISPTarget_SendByte(PollAddress >> 8);
ISPTarget_SendByte(PollAddress & 0xFF);
}
while ((ISPTarget_TransferByte(0x00) == PollValue) && !(TimeoutExpired));
while ((ISPTarget_TransferByte(0x00) == PollValue) && TimeoutTicksRemaining);
if (TimeoutExpired)
ProgrammingStatus = STATUS_CMD_TOUT;
if (!(TimeoutTicksRemaining))
ProgrammingStatus = STATUS_CMD_TOUT;
break;
case PROG_MODE_WORD_READYBUSY_MASK:

24
Projects/AVRISP-MKII/Lib/V2Protocol.c
View file

@ -44,10 +44,12 @@ bool MustLoadExtendedAddress;
/** ISR to manage timeouts whilst processing a V2Protocol command */
ISR(WDT_vect, ISR_BLOCK)
ISR(TIMER0_COMPA_vect, ISR_NOBLOCK)
{
TimeoutExpired = true;
wdt_disable();
if (TimeoutTicksRemaining)
TimeoutTicksRemaining--;
else
TCCR0B = 0;
}
/** Initializes the hardware and software associated with the V2 protocol command handling. */
@ -60,6 +62,11 @@ void V2Protocol_Init(void)
ADC_StartReading(VTARGET_REF_MASK | ADC_RIGHT_ADJUSTED | VTARGET_ADC_CHANNEL_MASK);
#endif
/* Timeout timer initialization (~10ms period) */
OCR0A = (((F_CPU / 1024) / 100) - 1);
TCCR0A = (1 << WGM01);
TIMSK0 = (1 << OCIE0A);
V2Params_LoadNonVolatileParamValues();
#if defined(ENABLE_ISP_PROTOCOL)
@ -75,10 +82,9 @@ void V2Protocol_ProcessCommand(void)
{
uint8_t V2Command = Endpoint_Read_8();
/* Start the watchdog with timeout interrupt enabled to manage the timeout */
TimeoutExpired = false;
wdt_enable(WDTO_1S);
WDTCSR |= (1 << WDIE);
/* Reset timeout counter duration and start the timer */
TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
TCCR0B = ((1 << CS02) | (1 << CS00));
switch (V2Command)
{
@ -140,8 +146,8 @@ void V2Protocol_ProcessCommand(void)
break;
}
/* Disable the timeout management watchdog timer */
wdt_disable();
/* Disable the timeout management timer */
TCCR0B = 0;
Endpoint_WaitUntilReady();
Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);

4
Projects/AVRISP-MKII/Lib/V2Protocol.h
View file

@ -78,8 +78,8 @@
/** Timeout period for each issued command from the host before it is aborted (in 10ms ticks). */
#define COMMAND_TIMEOUT_TICKS 100
/** Command timeout expiration flag, GPIOR for speed. */
#define TimeoutExpired GPIOR1
/** Command timeout ticks remaining counter, GPIOR for speed. */
#define TimeoutTicksRemaining GPIOR1
/** MUX mask for the VTARGET ADC channel number. */
#define VTARGET_ADC_CHANNEL_MASK ADC_GET_CHANNEL_MASK(VTARGET_ADC_CHANNEL)

8
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
View file

@ -85,7 +85,7 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (TimeoutExpired)
if (!(TimeoutTicksRemaining))
return false;
/* Check the status register read response to see if the NVM bus is enabled */
@ -110,7 +110,7 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (TimeoutExpired)
if (!(TimeoutTicksRemaining))
return false;
/* Check to see if the BUSY flag is still set */
@ -182,14 +182,14 @@ bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
/* Send the address of the location to read from */
TINYNVM_SendPointerAddress(ReadAddress);
while (ReadSize-- && !(TimeoutExpired))
while (ReadSize-- && TimeoutTicksRemaining)
{
/* Read the byte of data from the target */
XPROGTarget_SendByte(TPI_CMD_SLD | TPI_POINTER_INDIRECT_PI);
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
}
return (TimeoutExpired == false);
return (TimeoutTicksRemaining > 0);
}
/** Writes word addressed memory to the target's memory spaces.

10
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
View file

@ -80,7 +80,7 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (TimeoutExpired)
if (!(TimeoutTicksRemaining))
return false;
/* Check the status register read response to see if the NVM bus is enabled */
@ -109,7 +109,7 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (TimeoutExpired)
if (!(TimeoutTicksRemaining))
return false;
/* Check to see if the BUSY flag is still set */
@ -209,7 +209,7 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
for (uint8_t i = 0; i < XMEGA_CRC_LENGTH_BYTES; i++)
((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte();
return (TimeoutExpired == false);
return (TimeoutTicksRemaining > 0);
}
/** Reads memory from the target's memory spaces.
@ -241,10 +241,10 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16
/* Send a LD command with indirect access and post-increment to read out the bytes */
XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
while (ReadSize-- && !(TimeoutExpired))
while (ReadSize-- && TimeoutTicksRemaining)
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
return (TimeoutExpired == false);
return (TimeoutTicksRemaining > 0);
}
/** Writes byte addressed memory to the target's memory spaces.

2
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
View file

@ -153,7 +153,7 @@ uint8_t XPROGTarget_ReceiveByte(void)
XPROGTarget_SetRxMode();
/* Wait until a byte has been received before reading */
while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired));
while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
return UDR1;
}