ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Optimize vendor/product description string display code in MassStorageHost.

Browse source 
Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
This commit is contained in:
Dean Camera 2009-06-26 09:58:43 +00:00
parent b2cf4d3222
commit 1756087c3e
60 changed files with 51 additions and 20620 deletions
Download patch file Download diff file Expand all files Collapse all files

61
Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
View file

@ -1,61 +0,0 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mass Storage Host Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Mass Storage Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Bulk Only</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Mass Storage Standard</td>
* <td>USB Bulk-Only Transport Standard</td>
* <td>SCSI Primary Commands Specification</td>
* <td>SCSI Block Commands Specification</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Mass Storage host demonstration application. This gives a simple reference
* application for implementing a USB Mass Storage host, for USB storage devices
* using the standard Mass Storage USB profile.
*
* The first 512 bytes (boot sector) of an attached disk's memory will be dumped
* out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
* AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
* of the disk will be dumped to the serial port.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/