ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer.

Browse source
This commit is contained in:
Dean Camera 2010-10-26 06:52:09 +00:00
parent 55538dcef3
commit 08de757811
10 changed files with 88 additions and 112 deletions
Download patch file Download diff file Expand all files Collapse all files

87
Demos/Device/LowLevel/AudioOutput/AudioOutput.c
View file

@ -51,7 +51,6 @@ int main(void)
for (;;)
{
USB_Audio_Task();
USB_USBTask();
}
}
@ -80,27 +79,28 @@ void EVENT_USB_Device_Connect(void)
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
/* Sample reload timer initialization */
OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1;
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
TIMSK0 = (1 << OCIE0A);
OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1;
TCCR0A = (1 << WGM01); // CTC mode
TCCR0B = (1 << CS01); // Fcpu/8 speed
#if defined(AUDIO_OUT_MONO)
#if defined(AUDIO_OUT_MONO)
/* Set speaker as output */
DDRC |= (1 << 6);
#elif defined(AUDIO_OUT_STEREO)
DDRC |= (1 << 6);
#elif defined(AUDIO_OUT_STEREO)
/* Set speakers as outputs */
DDRC |= ((1 << 6) | (1 << 5));
#elif defined(AUDIO_OUT_PORTC)
DDRC |= ((1 << 6) | (1 << 5));
#elif defined(AUDIO_OUT_PORTC)
/* Set PORTC as outputs */
DDRC |= 0xFF;
#endif
DDRC |= 0xFF;
#endif
#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
/* PWM speaker timer initialization */
TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
| (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, F_CPU speed
#endif
TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
| (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, F_CPU speed
#endif
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
@ -110,20 +110,20 @@ void EVENT_USB_Device_Disconnect(void)
{
/* Stop the timers */
TCCR0B = 0;
#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
TCCR3B = 0;
#endif
#endif
#if defined(AUDIO_OUT_MONO)
#if defined(AUDIO_OUT_MONO)
/* Set speaker as input to reduce current draw */
DDRC &= ~(1 << 6);
#elif defined(AUDIO_OUT_STEREO)
DDRC &= ~(1 << 6);
#elif defined(AUDIO_OUT_STEREO)
/* Set speakers as inputs to reduce current draw */
DDRC &= ~((1 << 6) | (1 << 5));
#elif defined(AUDIO_OUT_PORTC)
DDRC &= ~((1 << 6) | (1 << 5));
#elif defined(AUDIO_OUT_PORTC)
/* Set PORTC low */
PORTC = 0x00;
#endif
PORTC = 0x00;
#endif
/* Indicate streaming audio interface not selected */
StreamingAudioInterfaceSelected = false;
@ -171,34 +171,23 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
}
}
/** Task to manage the Audio interface, reading in audio samples from the host, and outputting them to the speakers/LEDs as
* desired.
*/
void USB_Audio_Task(void)
/** ISR to handle the reloading of the PWM timer with the next sample. */
ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
/* Check to see if the streaming interface is selected, if not the host is not receiving audio */
if (!(StreamingAudioInterfaceSelected))
return;
uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
/* Select the audio stream endpoint */
Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM);
/* Check if the current endpoint can be read from (contains a packet) and that the next sample should be read */
if (Endpoint_IsOUTReceived() && (TIFR0 & (1 << OCF0A)))
/* Check if the current endpoint can be read from (contains a packet) and the host is sending data */
if (Endpoint_IsOUTReceived() && StreamingAudioInterfaceSelected)
{
/* Clear the sample reload timer */
TIFR0 |= (1 << OCF0A);
/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
int8_t LeftSample_8Bit = ((int16_t)Endpoint_Read_Word_LE() >> 8);
int8_t RightSample_8Bit = ((int16_t)Endpoint_Read_Word_LE() >> 8);
int8_t LeftSample_8Bit = ((int16_t)Endpoint_Read_Word_LE() >> 8);
int8_t RightSample_8Bit = ((int16_t)Endpoint_Read_Word_LE() >> 8);
/* Mix the two channels together to produce a mono, 8-bit sample */
int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
/* Check to see if the bank is now empty */
if (!(Endpoint_IsReadWriteAllowed()))
@ -207,17 +196,17 @@ void USB_Audio_Task(void)
Endpoint_ClearOUT();
}
#if defined(AUDIO_OUT_MONO)
#if defined(AUDIO_OUT_MONO)
/* Load the sample into the PWM timer channel */
OCR3A = (MixedSample_8Bit ^ (1 << 7));
#elif defined(AUDIO_OUT_STEREO)
#elif defined(AUDIO_OUT_STEREO)
/* Load the dual 8-bit samples into the PWM timer channels */
OCR3A = (LeftSample_8Bit ^ (1 << 7));
OCR3B = (RightSample_8Bit ^ (1 << 7));
#elif defined(AUDIO_OUT_PORTC)
#elif defined(AUDIO_OUT_PORTC)
/* Load the 8-bit mixed sample into PORTC */
PORTC = MixedSample_8Bit;
#endif
#endif
uint8_t LEDMask = LEDS_NO_LEDS;
@ -233,5 +222,7 @@ void USB_Audio_Task(void)
LEDs_SetAllLEDs(LEDMask);
}
Endpoint_SelectEndpoint(PrevEndpoint);
}