ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.

Browse source 
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)

Fix allowable F_CPU values comment in project makefiles.
This commit is contained in:
Dean Camera 2009-09-06 05:58:40 +00:00
parent f6700c0ea5
commit 0486f12e3e
52 changed files with 2357 additions and 1468 deletions
Download patch file Download diff file Expand all files Collapse all files

77
Demos/Device/ClassDriver/KeyboardMouse/makefile
View file

@ -71,28 +71,21 @@ BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency. You can then use this symbol in your source code to
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
# Typical values are:
# F_CPU = 1000000
# F_CPU = 1843200
# F_CPU = 2000000
# F_CPU = 3686400
# F_CPU = 4000000
# F_CPU = 7372800
# F_CPU = 8000000
# F_CPU = 11059200
# F_CPU = 14745600
# F_CPU = 16000000
# F_CPU = 18432000
# F_CPU = 20000000
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed). This value may
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
@ -465,7 +458,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@ -508,14 +501,17 @@ sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
showeventhooks: build
@echo
@echo -------- Unhooked LUFA Events --------
@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo --------------------------------------
$(LUFA_PATH)/LUFA/LUFA_Events.lst:
@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
@echo
@echo Checking for invalid events...
@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
@sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
@if test -s InvalidEvents.tmp; then exit 1; fi
showliboptions:
@echo
@echo ---- Compile Time Library Options ----
@ -532,16 +528,37 @@ showtarget:
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
@echo --------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
$(COPY) $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@ -696,9 +713,9 @@ clean_list:
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVE) InvalidEvents.tmp
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@ -716,8 +733,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
# Listing of phony targets.
.PHONY : all showeventhooks showliboptions showtarget \
begin finish end sizebefore sizeafter gccversion build \
elf hex eep lss sym coff extcoff program clean debug \
clean_list clean_binary gdb-config doxygen dfu flip \
flip-ee dfu-ee
.PHONY : all checkinvalidevents showliboptions \
showtarget begin finish end sizebefore sizeafter \
gccversion build elf hex eep lss sym coff extcoff \
program dfu flip flip-ee dfu-ee clean debug \
clean_list clean_binary gdb-config doxygen