ahoneybun/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
qmk_firmware/keyboards/pteropus/readme.md
hulahermit b6a636d954
[Keyboard] Add pteropus keyboard (#20147) 
Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: Chi-Han Yang <chyang@enrichtx.com>
2023-03-20 23:44:56 -07:00

1.3 KiB
Raw Blame History

pteropus keyboard

pteropus

Another Miryoku inspired 36-key non-split keyboard

  • Keyboard Maintainer: hulahermit
  • Hardware Supported: Embeded type-c connector with STM32F072 microcontroller
  • Hardware Availability: pteropus

Make example for this keyboard (after setting up your build environment):

make pteropus:default
make pteropus:manna-harbour_miryoku

Flashing example for this keyboard:

make pteropus:default:flash
make pteropus:manna-harbour_miryoku:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader:

  • Bootmagic reset: Hold down the top-left key and plug in the keyboard.
  • Physical reset: Hold the BOOT button down, then press the RESET button. Alternately, plug the keyboard in while holding down the BOOT button. The BOOT button can be released after a few seconds.
  • Keycode in layout: There is no key mapped to QK_BOOT in the pre-created keymap, but you may assign this key in any keymaps you create.