History

jack 2d37e80ac9 Migrate remaining `split.soft_serial_pin` to `split.serial.pin` (#25046 ) * Migrate keyboards/bastardkb * Migrate keyboards/handwired * Migrate keyboards/helix * Fix duplicate serial key		2025-03-22 09:58:33 -06:00
..
keymaps/default	Remove all via-enabled keymaps, including `via`. (#24322 )	2024-08-26 07:51:22 +10:00
keyboard.json	Migrate remaining `split.soft_serial_pin` to `split.serial.pin` (#25046 )	2025-03-22 09:58:33 -06:00
readme.md	Add 'dactyl_tracer' keyboard (#20993 )	2023-09-22 21:45:34 -07:00

readme.md

Dactyl Tracer

The Dactyl Tracer is a handwired, split bodied, concave key-well, columnar keyboard. Case design is similar to the Dactyl CC though overall design is closer to the Dactyl ManuForm. The Q and P keys are vertically offset, from A and ; keys respectively, to allow for easier actuation by third/ring finger.

Keyboard Maintainer: Michael Johns
Hardware Supported: Pro Micro controller, or clone of
Hardware Availability: Case Files

Make example for this keyboard (after setting up your build environment):

make handwired/dactyl_tracer:default

Flashing example for this keyboard:

make handwired/dactyl_tracer:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to QK_BOOT if it is available