From b7edce375e65c520ea89128d38c3a7fb912e5dea Mon Sep 17 00:00:00 2001
From: Aaron  Honeycutt <aaronhoneycutt@protonmail.com>
Date: Fri, 30 Dec 2022 00:07:32 +0000
Subject: [PATCH] Add new file

---
 systems/linode.nix | 124 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 systems/linode.nix

diff --git a/systems/linode.nix b/systems/linode.nix
new file mode 100644
index 0000000..bcec7a9
--- /dev/null
+++ b/systems/linode.nix
@@ -0,0 +1,124 @@
+{ config, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+  
+  boot.kernelParams = [ "console=ttyS0,19200n8" ];
+
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  boot.loader.grub.extraConfig = ''
+    serial --speed=19200 --unit=0 --word=8 --parity=no --stop=1;
+    terminal_input serial;
+    terminal_output serial
+  '';
+  # boot.loader.grub.efiSupport = true;
+  # boot.loader.grub.efiInstallAsRemovable = true;
+  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
+  # Define on which hard drive you want to install Grub.
+  boot.loader.grub.device = "nodev"; # or "nodev" for efi only
+  boot.loader.timeout = 10;
+
+  # networking.hostName = "nixos"; # Define your hostname.
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  # time.timeZone = "Europe/Amsterdam";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkbOptions in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.layout = "us";
+  # services.xserver.xkbOptions = {
+  #   "eurosign:e";
+  #   "caps:escape" # map caps to escape.
+  # };
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # sound.enable = true;
+  # hardware.pulseaudio.enable = true;
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.aaronh = {
+    isNormalUser = true;
+    extraGroups = [ "wheel" "networkmanager" ]; # Enable ‘sudo’ for the user.
+    packages = with pkgs; [
+        inetutils
+        mtr
+        sysstat
+  #     firefox
+  #     thunderbird
+    ];
+  };
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  # environment.systemPackages = with pkgs; [
+  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #   wget
+  # ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh = {
+    enable = true;
+    permitRootLogin = "yes";
+  };
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+  networking.usePredictableInterfaceNames = false;
+  networking.useDHCP = false;
+  networking.interfaces.eth0.useDHCP = true;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "22.11"; # Did you read the comment?
+
+}