diff --git a/systems/harbinger.nix b/systems/harbinger.nix
new file mode 100644
index 0000000..018a464
--- /dev/null
+++ b/systems/harbinger.nix
@@ -0,0 +1,173 @@
+{ config, pkgs, ... }:
+
+{
+ imports =
+ [ # Include the results of the hardware scan.
+ ./hardware-configuration.nix
+# ./unstable.nix
+ ];
+
+ boot.kernelPackages = pkgs.linuxPackages_latest;
+ boot.kernelParams = [ "console=ttyS0,19200n8" ];
+
+ boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
+
+ nix.settings.extra-platforms = [ "aarch64-linux" ];
+ nix.settings.auto-optimise-store = true;
+ nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+ nix.buildMachines = [{
+ hostName = "localhost";
+ systems = ["x86_64-linux"
+ "aarch64-linux"
+ "x86_64-darwin"
+ "aarch64-darwin"];
+ supportedFeatures = ["kvm" "nixos-test" "big-parallel" "benchmark"];
+ maxJobs = 8;
+ }];
+
+ nix.gc = {
+ automatic = true;
+ dates = "weekly";
+ options = "--delete-older-than 30d";
+ };
+
+ # Use the GRUB 2 boot loader.
+ boot.loader.grub.enable = true;
+ boot.loader.grub.version = 2;
+ boot.loader.grub.extraConfig = ''
+ serial --speed=19200 --unit=0 --word=8 --parity=no --stop=1;
+ terminal_input serial;
+ terminal_output serial
+ '';
+ boot.loader.grub.device = "nodev"; # or "nodev" for efi only
+ boot.loader.timeout = 10;
+
+ networking.firewall = {
+ enable = true;
+ allowedTCPPorts = [ 80 443 ];
+ };
+
+ networking.extraHosts =
+ ''
+ 23.32.241.51 r3.o.lencr.org
+ '';
+
+ fileSystems."/mnt/swapfile" =
+ { device = "/dev/disk/by-uuid/82672991-fe8a-485a-8dcf-7c8ae1282b6c";
+ fsType = "ext4";
+ };
+
+ services.hydra = {
+ enable = true;
+ hydraURL = "localhost:3000";
+ notificationSender = "hydra@localhost";
+ #buildMachinesFiles = [];
+ useSubstitutes = true;
+ };
+
+ security.acme.acceptTerms = true;
+ security.acme.defaults.email = "aaronhoneycutt@proton.me";
+
+ networking.hostName = "nixos-server"; # Define your hostname.
+ # Pick only one of the below networking options.
+ # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
+ # networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
+
+ # Set your time zone.
+ # time.timeZone = "Europe/Amsterdam";
+
+ # Configure network proxy if necessary
+ # networking.proxy.default = "http://user:password@proxy:port/";
+ # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+ # Enable CUPS to print documents.
+ # services.printing.enable = true;
+
+ # Enable sound.
+ # sound.enable = true;
+ # hardware.pulseaudio.enable = true;
+
+ # Enable touchpad support (enabled default in most desktopManager).
+ # services.xserver.libinput.enable = true;
+
+ # Define a user account. Don't forget to set a password with ‘passwd’.
+ users.users.aaronh = {
+ isNormalUser = true;
+ extraGroups = [ "wheel" "networkmanager" ]; # Enable ‘sudo’ for the user.
+ packages = with pkgs; [
+ cargo
+ flatpak
+ git
+ git-lfs
+ just
+ ];
+ };
+
+ users.users.nathanielw = {
+ isNormalUser = true;
+ extraGroups = [ "wheel" "networkmanager" ];
+ packages = with pkgs; [
+ neofetch
+ ];
+ };
+
+ users.users.builder = {
+ isNormalUser = true;
+ extraGroups = [ "wheel" ];
+ packages = with pkgs; [
+ neofetch
+ ];
+ };
+
+ environment.systemPackages = with pkgs; [
+ acme-sh
+ git
+ inetutils
+ mtr
+ neofetch
+ sysstat
+ toybox
+ tree
+ wget
+ ];
+
+ # Some programs need SUID wrappers, can be configured further or are
+ # started in user sessions.
+ # programs.mtr.enable = true;
+ # programs.gnupg.agent = {
+ # enable = true;
+ # enableSSHSupport = true;
+ # };
+
+ # List services that you want to enable:
+
+ # Enable the OpenSSH daemon.
+ services.openssh = {
+ enable = true;
+ permitRootLogin = "yes";
+ };
+
+ # Open ports in the firewall.
+ # networking.firewall.allowedTCPPorts = [ ... ];
+ # networking.firewall.allowedUDPPorts = [ ... ];
+ # Or disable the firewall altogether.
+ # networking.firewall.enable = false;
+ networking.usePredictableInterfaceNames = false;
+ networking.useDHCP = false;
+ networking.interfaces.eth0.useDHCP = true;
+
+ # Copy the NixOS configuration file and link it from the resulting system
+ # (/run/current-system/configuration.nix). This is useful in case you
+ # accidentally delete configuration.nix.
+ # system.copySystemConfiguration = true;
+
+ # This value determines the NixOS release from which the default
+ # settings for stateful data, like file locations and database versions
+ # on your system were taken. It‘s perfectly fine and recommended to leave
+ # this value at the release version of the first install of this system.
+ # Before changing this value read the documentation for this option
+ # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+ system.stateVersion = "22.11"; # Did you read the comment?
+
+}
diff --git a/systems/sovereign.nix b/systems/sovereign.nix
new file mode 100644
index 0000000..018a464
--- /dev/null
+++ b/systems/sovereign.nix
@@ -0,0 +1,173 @@
+{ config, pkgs, ... }:
+
+{
+ imports =
+ [ # Include the results of the hardware scan.
+ ./hardware-configuration.nix
+# ./unstable.nix
+ ];
+
+ boot.kernelPackages = pkgs.linuxPackages_latest;
+ boot.kernelParams = [ "console=ttyS0,19200n8" ];
+
+ boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
+
+ nix.settings.extra-platforms = [ "aarch64-linux" ];
+ nix.settings.auto-optimise-store = true;
+ nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+ nix.buildMachines = [{
+ hostName = "localhost";
+ systems = ["x86_64-linux"
+ "aarch64-linux"
+ "x86_64-darwin"
+ "aarch64-darwin"];
+ supportedFeatures = ["kvm" "nixos-test" "big-parallel" "benchmark"];
+ maxJobs = 8;
+ }];
+
+ nix.gc = {
+ automatic = true;
+ dates = "weekly";
+ options = "--delete-older-than 30d";
+ };
+
+ # Use the GRUB 2 boot loader.
+ boot.loader.grub.enable = true;
+ boot.loader.grub.version = 2;
+ boot.loader.grub.extraConfig = ''
+ serial --speed=19200 --unit=0 --word=8 --parity=no --stop=1;
+ terminal_input serial;
+ terminal_output serial
+ '';
+ boot.loader.grub.device = "nodev"; # or "nodev" for efi only
+ boot.loader.timeout = 10;
+
+ networking.firewall = {
+ enable = true;
+ allowedTCPPorts = [ 80 443 ];
+ };
+
+ networking.extraHosts =
+ ''
+ 23.32.241.51 r3.o.lencr.org
+ '';
+
+ fileSystems."/mnt/swapfile" =
+ { device = "/dev/disk/by-uuid/82672991-fe8a-485a-8dcf-7c8ae1282b6c";
+ fsType = "ext4";
+ };
+
+ services.hydra = {
+ enable = true;
+ hydraURL = "localhost:3000";
+ notificationSender = "hydra@localhost";
+ #buildMachinesFiles = [];
+ useSubstitutes = true;
+ };
+
+ security.acme.acceptTerms = true;
+ security.acme.defaults.email = "aaronhoneycutt@proton.me";
+
+ networking.hostName = "nixos-server"; # Define your hostname.
+ # Pick only one of the below networking options.
+ # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
+ # networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
+
+ # Set your time zone.
+ # time.timeZone = "Europe/Amsterdam";
+
+ # Configure network proxy if necessary
+ # networking.proxy.default = "http://user:password@proxy:port/";
+ # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+ # Enable CUPS to print documents.
+ # services.printing.enable = true;
+
+ # Enable sound.
+ # sound.enable = true;
+ # hardware.pulseaudio.enable = true;
+
+ # Enable touchpad support (enabled default in most desktopManager).
+ # services.xserver.libinput.enable = true;
+
+ # Define a user account. Don't forget to set a password with ‘passwd’.
+ users.users.aaronh = {
+ isNormalUser = true;
+ extraGroups = [ "wheel" "networkmanager" ]; # Enable ‘sudo’ for the user.
+ packages = with pkgs; [
+ cargo
+ flatpak
+ git
+ git-lfs
+ just
+ ];
+ };
+
+ users.users.nathanielw = {
+ isNormalUser = true;
+ extraGroups = [ "wheel" "networkmanager" ];
+ packages = with pkgs; [
+ neofetch
+ ];
+ };
+
+ users.users.builder = {
+ isNormalUser = true;
+ extraGroups = [ "wheel" ];
+ packages = with pkgs; [
+ neofetch
+ ];
+ };
+
+ environment.systemPackages = with pkgs; [
+ acme-sh
+ git
+ inetutils
+ mtr
+ neofetch
+ sysstat
+ toybox
+ tree
+ wget
+ ];
+
+ # Some programs need SUID wrappers, can be configured further or are
+ # started in user sessions.
+ # programs.mtr.enable = true;
+ # programs.gnupg.agent = {
+ # enable = true;
+ # enableSSHSupport = true;
+ # };
+
+ # List services that you want to enable:
+
+ # Enable the OpenSSH daemon.
+ services.openssh = {
+ enable = true;
+ permitRootLogin = "yes";
+ };
+
+ # Open ports in the firewall.
+ # networking.firewall.allowedTCPPorts = [ ... ];
+ # networking.firewall.allowedUDPPorts = [ ... ];
+ # Or disable the firewall altogether.
+ # networking.firewall.enable = false;
+ networking.usePredictableInterfaceNames = false;
+ networking.useDHCP = false;
+ networking.interfaces.eth0.useDHCP = true;
+
+ # Copy the NixOS configuration file and link it from the resulting system
+ # (/run/current-system/configuration.nix). This is useful in case you
+ # accidentally delete configuration.nix.
+ # system.copySystemConfiguration = true;
+
+ # This value determines the NixOS release from which the default
+ # settings for stateful data, like file locations and database versions
+ # on your system were taken. It‘s perfectly fine and recommended to leave
+ # this value at the release version of the first install of this system.
+ # Before changing this value read the documentation for this option
+ # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+ system.stateVersion = "22.11"; # Did you read the comment?
+
+}